Blowers and Fans
Showing 46–60 of 60 results
-
Tempest Smooth Bore Stabilizer
Price range: $497.97 through $652.69Smooth Bore Stabilizer -
Tempest Special Operations Gas Power Blower
$3,397.78Special Operations Power Blowers: the perfect choice to ventilate large, complex and/or multi-story structures and stairwells. LAMINAR AIR FLOW The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. HONDA® GX200 AND GX270 ENGINES The SP positive pressure ventilation fans are powered by the tried and true Honda® name. Using two of their most reliable small engines, the GX200 and GX270, paired with Tempest’s signature quality fan designs, these units are built to last. At 5.5 and 8.5 HP, the GX series motors are also equipped to deliver the performance and CFM you’d expect from the Tempest name. EXTENDED SET BACK Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a set-back of 8.86 to 10.8 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design makes high performance at this distance possible. SP units require at least a 6.9 m set back to achieve effective positive pressure ventilation. FLIP-UP/FOLD-DOWN HANDLE The exclusive full width handle design makes pushing or pulling a positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. SIX POSITION DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. REAR WHEEL DESIGN The rear wheel design improves the PPV fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across snow, heavy mud or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes. INFORMATION/SAFETY BAR Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use. PRODUCT CHARACTERISTICS Special Operations Power BlowersTM are the perfect choice for departments who often ventilate large, complex and/or multi-story structures (>5005.21 sq.ft.) and stairwells. Allows for distanced set-back over 9.84 ft. but requires at least 6.88 ft. to achieve positive pressure ventilation. Available in gas (Honda® GX engine) or electric (GFCI compatible, variable speed) driven models. TYPE Positive Pressure Ventilation Fan, Laminar Air Flow (LAF) DRIVE/MOTOR 18″ Model: Direct Drive Gasoline – 5.5 HP Honda® GX200 21″ Model: Direct Drive Gasoline – 8.5 HP Honda® GX270 BLADE 18″ or 21″ Diameter Assembly Made Up of AirFlex Fiberglass Reinforced Polyamide Blades SHROUD “SP” Design, Tapered Aluminum w/ Durable Powder-Coat Finish WHEELS 8″ Non-Pneumatic w/ Steel Hubs GRILLE Powder Coated, Continuous Circular-Wound, Flat Spiral with 6 Tie Points for Additional Safety. Meets UL & European CE Safety Standards FRAME Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish TILT Foot-Operated Tilt Mechanism Six Position Tilt, +15°, +10°, +5°, 0°, -5°, -10° Part No. Model No. Diameter HP CFM Dimensions (W” x D” x H”) Weight 910-1620 SP-18-H-5.5 18″ 5.5 15,792 20.50″ x 21.50″ x 22.50″ 88lbs. -
Tempest Variable-Speed Electric Power Blower
Price range: $2,878.28 through $3,852.79The VSR is the latest innovation in our variable speed electric delivers unmatched performance. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity and pressure from each Tempest Power Blower™. Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. ERGONOMIC DESIGN Exclusive frame design makes it convenient to lift, carry and transport. Numerous points on the frame double as lifting/carrying handles. The design itself is the result of three decades of testing, research and experience to create the most ergonomic platform possible. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot operated adjustment is quick, easy and secure. Allows for up to 5 (4 on 16” models) tilt positions: -5°, 0°, +5°, +10°, +15°. GFCI/NEMA 4 VARIABLE SPEED DRIVE The VSR positive pressure ventilation fan bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable and easy to operate. The 0 – 100 Rheostat knob and On/Off toggle are all it takes to operate the unit quickly and effectively. PERFORMANCE 2.0 HP MOTOR You don’t always have to sacrifice performance for the convenience of an electric powered positive pressure ventilation fan. Our latest Power BlowerTM, the VSR, is closing the CFM gap between gas and electric. Equipped with a massive 2.0 HP motor, paired with our signature blade and shroud design, the VSR delivers the absolute best in GFCI compatible performance. If you’re looking to go electric but don’t want to sacrifice airflow, the VSR PPV fan is the answer. 8″ NON-PNEUMATIC WHEELS Extra wide 8″ off-road non-pneumatic tires are more durable and allow easy movement up and down stairs, over curbs and large diameter hoses, as well as through rough or muddy terrain. No brakes to forget to lock down or unlock. The PPV fan rests on firm, anti-vibration rubber feet for stability. “Walking” or movement of the fan while in operation is eliminated. Risk of getting clothing in the positive pressure fan’s blades while kneeling to set brake levers is eliminated. 16″ models are only available with 6″ non-pneumatic tires. TURBO 2000 SHROUD By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. The air hitting the ventilation opening is stronger and maintains PPV pressure farther downwind. FLIP-UP/FOLD-DOWN HANDLE The exclusive full width handle design makes pushing or pulling the positive pressure ventilation fan to and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV. Foot operated adjustment is quick, easy and secure. Dual step allows for adjustment with either foot. Four back and one forward tilt position. SAFETY GRILLE Front and rear safety grilles feature a continuous spun wire body with eight tie point bars that also support the “Turbo 2000” shroud integrity. Meets strict European CE Safety Standards. INFORMATION/SAFETY BAR Features a large section of durable, reflective material to dramatically increase visibility of the blower from front view and a full list of instructions on the back to allow for safe and effective use. PRODUCT CHARACTERISTICS The VSR is the latest innovation in our variable speed electric offering and delivers unmatched performance, bridging the gap between gas and electric airflow. All models feature a class leading 2.0 HP motor and simple to operate 0 to 100 variable speed control. NEMA-4 rated drive provides extra protection in wet environments. This fan will operate on GFCI protected circuits. Motors can be ordered in 110-120V/60Hz or 220-230V/50Hz. (110-120V part numbers shown; call for 220-230V part numbers). TYPE Variable-Speed Positive Pressure Ventilator BLADE 16 to 24” Diameter Assembly Made Up of 8 Air Flex Fiberglass Reinforced Polyamide Blades FRAME Welded Square Steel Tubing with Powder-Coat Finish SHROUD Turbo 2000 Tapered Aluminum BUSHING Keyed Shaft and Set or Cap Screws WHEELS 8” Non-Pneumatic with High Strength Steel Hubs GRILLE Continuous Circular Wound External-Weld Steel Wire with 8 Tie Points for additional safety - Steel is Zinc-Plated with a Clear Chromate Finish MOTOR/DRIVE 0.5 HP Variable Speed OR 0.8 HP Variable Speed OR 1.5 HP Variable Speed OR 2.0HP Variable Speed EXPLOSION PROOF 120V / 60Hz Standard (Other Options may be Available) Approx. Amp Draw -14 AMP Rated for Class I (Group C & D) and Class II (Group F & G) Environments MAXIMUM CORD LENGTH 14 GA. - 60’ 12 GA. - 95’ 10 GA. - 150’ 8 GA. - 240’ 6 GA. - 380’ Part No. Model No. Dia. Option Power CFM Dimensions (inches) Weight 910-1400 VS-16-R-2.0 16" Variable Speed 2.0 11,551 21" x 19.75" x 23" 98 Lbs. 910-1420 VS-18-R-2.0 18" Variable Speed 2.0 12,839 23" x 21" x 24.25" 104 Lbs. 910-1440 VS-21-R-2.0 21" Variable Speed 2.0 14,836 26" x 21" x 26.25" 108 Lbs. 910-1460 VS-24-R-2.0 24" Variable Speed 2.0 15663 29.5" x 21" x 30" 119 Lbs. 910-1300 VS-16-G-1.5 16" Variable Speed 1.5 11,125 21" x 19.75" x 21.75" 89 Lbs. 910-1320 VS-18-G-1.5 18" Variable Speed 1.5 11,861 23" x 21" x 24.25" 95 Lbs. 910-1340 VS-21-G-1.5 21" Variable Speed 1.5 13,414 26" x 21" x 26.25" 99 Lbs. 910-1360 VS-24-G-1.5 24" Variable Speed 1.5 12,901 29.5" x 21" x 30" 109 Lbs. 910-1500 VS-16-M-0.5 16" Variable Speed 0.5 10,650 21" x 19.75" x 21.75" 68 Lbs. 910-1520 VS-18-M-0.5 18" Variable Speed 0.5 8,465 23" x 21" x 24.25" 82 Lbs. 910-1540 VS-21-M-0.5 21" Variable Speed 0.8 11,475 26" x 21" x 26.5" 86 Lbs. -
Tempest Variable-Speed Special Operations Electric Power Blower
$4,223.79Special Operations Power Blowers: the perfect choice to ventilate large, complex, and/or multi-story structures and stairwells. LAMINAR AIRFLOW The Special Operations (SP) Power Blower™ uses a uniquely designed grill and shroud to produce a narrow, high-pressure air pattern called Laminar Air Flow. Fires in large, complex structures as well as multi-level structures build high back pressures inside the building. This high-pressure air pattern is capable of overcoming these back pressures resulting in uninhibited ventilation. This allows for a distanced set-back reducing fan noise heard inside the structure. AIRFLEX COMPOSITION IMPELLER Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower™ . Every size and type of fan features a blade designed specifically for it to deliver the greatest performance possible. Composite blades are much safer than traditional metal blades as they are designed to disintegrate upon the impact of any foreign objects. Metal blades may fragment when integrity is compromised, potentially causing severe injury. WELDED STEEL ROLL CAGE FRAME Every bend and cross brace weld is structurally engineered to increase the blower frame’s strength to weight ratio by as much as 30%. Welds eliminate the need to continuously maintain/tighten nuts and bolts. Its roll cage design gives protection to all angles and sides of the shroud and motor. FOOT OPERATED TILT ADJUSTMENT No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. GFCI COMPATIBLE VARIABLE-SPEED ELECTRIC The SPVS bears our latest variable speed drive. This GFCI compatible, NEMA 4 rated control box is durable, reliable, and easy to operate. The 0 – 100 rheostat knob and On/Off toggle is all it takes to operate the unit quickly and effectively. PERFORMANCE 2.0 HP MOTOR Equipped with a massive 2.0 HP motor and paired with its signature blade and shroud design, the SPVS positive pressure ventilation fan delivers the absolute best in GFCI compatible performance. EXTENDED SET BACK Cone Air Flow fan placement has always been 1.2 to 1.8 m from the doorway. The SP fan is most effective at a setback of 2.7 to 3.3 m using Laminar Air Flow, allowing improved personnel access. The new shroud and grille design allow high performance at this distance possible. SP units require at least a 7-foot set back to achieve effective positive pressure ventilation. FLIP-UP/FOLD-DOWN HANDLE The exclusive full-width handle design makes pushing or pulling the positive pressure ventilation fan too and from the ventilation site quick and easy. The handle quickly swings up to a comfortable height and automatically locks firmly into position. Unlatch and easily fold the handle down for storage at the PPV fan’s listed dimensions. SIX POSITION DUAL “WINNING STEP” No levers to set or knobs to tighten when setting the angle for PPV/PPA. Foot-operated adjustment is quick, easy, and secure. Allows for up to 6 tilt positions: -10°, -5°, 0°, +5°, +10°, +15°. REAR WHEEL DESIGN The rear wheel design improves the positive pressure ventilation fan balance while it is rolling, keeping the shroud from touching the ground and making deployment easy across the snow, heavy mud, or rough, uneven terrain. This design also allows for rapid blower direction adjustment saving time and improving safety. Tempest blowers have no need for wheel brakes. This in turn removes the chance for forgetting to set/release the brakes. INFORMATION/SAFETY BAR The Information/Safety Bar added to the folding handle features a large section of durable, reflective material to dramatically increase the visibility of the PPV fan from the front view and a full list of instructions to allow for safe and effective use. PRODUCT CHARACTERISTICS Special Operations Power BlowersTM are the perfect choice for departments who often ventilate large, complex and/or multi-story structures (>464 sq. m.) and stairwells. Allows for distanced set-back over 3 m. but requires at least 2.1 m to achieve positive pressure ventilation. Available in gas (Honda® GX engine) or electric (GFCI compatible, variable speed) driven models. TYPE Positive Pressure Ventilation Fan, Laminar Air Flow (LAF) BLADE 18″ Diameter Assembly Made Up of AirFlex Fiberglass Reinforced Polyamide Blades FRAME Rugged, Lightweight, Square-Steel Tubing with Powder-Coat Finish SHROUD “SP” Design, Tapered Aluminum w/ Durable Powder-Coat Finish WHEELS 8″ Non-Pneumatic w/ Steel Hubs GRILLE Powder Coated, Continuous Circular-Wound, Flat Spiral with 6 Tie Points for Additional Safety. Meets UL & European CE Safety Standards MOTOR/DRIVE Direct-Drive Variable Speed 110-120V, 60Hz (220-230V, 50Hz Available) Electric Motor GFCI Compatible NEMA-4 Rated Drive TILT Foot-Operated Tilt Mechanism Six Position Tilt, +15°, +10°, +5°, 0°, -5°, -10° Part No. Model No. Dia. HP CFM Dimensions (W” x D” x H”) Weight 910-1720 SP-18-V-2.0 18″ 2.0 13,338 21.75″ x 21.50″ x 25.75″ 105 lbs. -
Tempest Ventilation Kit
Price range: $3,666.19 through $4,190.79A simple and effective way to remove fumes, dust or odors from a job site. Place the fan near the source of the contaminants, connect the Smooth Bore Ducting, and run the ducting to an outside area up to 150′ away or more. Made in the USA. A simple and effective way to remove fumes, dust or odors from a job site. Place the fan near the source of the contaminants, connect the Smooth Bore Ducting, and run the ducting to an outside area up to 150′ away or more. 24-IND Package: Part No. 913-1523 24-IND-EP (Explosion Proof) Package: Part No. 913-1524 24-HD Package: Part No. 913-1521 24-HD-EP (Explosion Proof) Package: Part No. 913-1522 Includes: Tempest Fan – 24-IND (Shown) or 24-HD Accessories – 500 ft. roll of 6 mil. Smooth Bore Ducting (Not Shown) – Smooth Bore Stabilizer – Pair of Ratchet Tie-Down Straps -
Tempest VS-1.2 Tech Series Battery Power Blower w/ Folding Handle
$6,561.26The VS-1.2 battery-driven blower delivers a level of utility and performance found with no other battery-driven blower. 70-Minute Run-Time Even at full speed, the Tempest VS-1.2 provides an industry-leading 70 minute run time with fold-down handle 10,887 CFM AMCA Certified Air Flow A taped lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2 Removable Battery Dependability is a must so we designed the best Lithium-Ion battery for the VS-1 blower. The battery is IP 65 rated, can be recharged in about 4 hours, and run on a complete charge for 70 minutes at full speed. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 52 lbs. with Battery The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 Other Features: - Variable Speed motor rated at IP65 - Thin-Vane air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 22.88″W x 24.4″H x 11″D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. CHARACTERISTICS: The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The VS-1.2 battery-driven blower features a taller fold down handle to make deployment and storage easier. It delivers a level of utility and performance found with no other battery-driven blower. Type Battery Powered Positive Pressure Power Blower IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 3.9″ High Impact Rubber GRILL Thin-Vane air straightener grill. MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY Removable lithium-ion w/Dynamic Battery Management System TILT -12° to +25° Part No. Model No. Dia. CFM Dimensions (W” x D” x H”) Weight 910-1825 VS1-18-0.9 FOLDING HANDLE w/Battery & Charger 18″ 10,887 22.88″ x 11″ x 24.4″ 53 lbs. -
Tempest VS-1.2 Tech Series Deluxe Battery Charger, Plug In, 110/220 VAC to 48 VDC
$224.12VS-1.2 Tech Series Deluxe Battery Charger, Plug In, 110/220 VAC to 48 VDC -
Tempest VS-1.2 Tech Series Deluxe Battery Power Blower w/ Folding Handle
$7,556.47The VS-1.2 battery-driven blower delivers a level of utility and performance found with no other battery-driven blower. 70-Minute Run-Time Even at full speed, the Tempest VS-1.2 provides an industry-leading 70 minute run time with fold-down handle 10,887 CFM AMCA Certified Air Flow A taped lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2 Removable Battery Dependability is a must so we designed the best Lithium-Ion battery for the VS-1 blower. The battery is IP 65 rated, can be recharged in about 4 hours, and run on a complete charge for 70 minutes at full speed. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 54 lbs. with Battery The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 Other Features: - Variable Speed motor rated at IP65 - Thin-Vane air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 22.88″W x 24.4″H x 11″D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. CHARACTERISTICS: The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The VS-1.2 battery-driven blower features a taller fold down handle to make deployment and storage easier. It delivers a level of utility and performance found with no other battery-driven blower. Type Battery Powered Positive Pressure Power Blower IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 3.9″ High Impact Rubber GRILL Thin-Vane air straightener grill. MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY Removable lithium-ion w/Dynamic Battery Management System TILT -12° to +25° Part No. Model No. Dia. HP CFM Dimensions Weight 910-1827 VS-1.2 DELUXE - 2 Batteries/1 Charger 18″ 0.9 10,887 23.75" x 15.25" x 25" 54 lbs. -
Tempest VS-1.2 Tech Series Deluxe Battery Tray Locking Strap
$34.96VS-1.2 Tech Series Deluxe Battery Tray Locking Strap -
Tempest VS-1.2 Tech Series Deluxe Replacement Battery VS1, VS1.2, 48 VDC, 17.5 AH
$1,110.61VS-1.2 Tech Series Deluxe Replacement Battery VS1, VS1.2, 48 VDC, 17.5 AH -
Tempest VS-1.2D Tech Series DEWALT Battery Power Blower w/ folding handle
Price range: $6,499.71 through $9,916.20The VS-1.2D DEWALT battery-driven blower delivers a level of utility and performance found with no other battery-driven blower with the convenience of DEWALT FLEXVOLT 60V batteries. 70-Minute Run-Time Even at full speed, the Tempest VS-1.2 provides an industry-leading 70 minute run time with fold-down handle 10,887 CFM AMCA Certified Air Flow A taped lightweight steel shroud and uniquely designed composite impeller delivers maximum air volume (CFM), velocity and pressure from the VS-1.2 Removable Battery Dependability is a must so we designed the best Lithium-Ion battery for the VS-1 blower. The battery is IP 65 rated, can be recharged in about 4 hours, and run on a complete charge for 70 minutes at full speed. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 52 lbs. with Battery The welded tubular aluminum frame design makes it easy to roll or lift. US Patent #.: US 11,333,291 B2 Other Features: - Variable Speed motor rated at IP65 - Thin-Vane air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 22.88″W x 24.4″H x 11″D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. CHARACTERISTICS: The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The VS-1.2 battery-driven blower features a taller fold down handle to make deployment and storage easier. It delivers a level of utility and performance found with no other battery-driven blower. Type DEWALT FLEXVOLT Battery Powered Positive Pressure Power Blower IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 3.9″ High Impact Rubber GRILL Thin-Vane air straightener grill MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY With all 3 DEWALT 60V 12AH Batteries, blower will run for an average of 40 minutes or you can run off of just 1 or 2 batteries w/Dynamic Battery Management System TILT -12° to +25° Part No. Model No. Dia. CFM Dimensions (W” x D” x H”) Weight 910-1860 VS1.2 DEWALT Basic – No Battery/No Charger 18″ 9,614 22.88”L x 24.4”H x 12.25”D 51 lbs. 910-1860A Kit includes - 3 x 12Ah DEWALT Batteries & 1 Single-Bay Charger 910-1860B Kit includes - 3 x 12Ah DEWALT Batteries & 4-Bay Charger -
Tempest VS-1.3H Tech Series Powered by HURST Jaws of Life E3/EWXT Batteries
$6,414.59Tempest VS1.3H Tech Series, powered by 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries, delivers power & versatility 35-Minute Run-Time With 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries, the blower will run for an average of 35 minutes. 10,887 CFM Tested to AMCA Standards A tapered lightweight steel shroud and uniquely designed composite impeller delivers constant air volume (CFM), velocity and pressure from the VS-1.3 Removable Battery Powered by 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 50 lbs. with both batteries The welded tubular aluminum frame design makes it easy to roll or lift. Increased depth for greater stability and Large 6” wheels for ease of rolling over obstaclesUS Patent #.: US 11,333,291 B2 Other Features - Variable Speed motor rated at IP65 - Ultra-Light-air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 23.75”L x 25”H x 15.25”D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. PRODUCT CHARACTERISTICS The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. The Tempest VS1.3H Tech Series, powered by 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries is delivers power and versatility. Type VS1.3H Tech Series, powered by 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 6″ High Impact Rubber GRILL Thin-Vane air straightener grill. MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY With 2 removable HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries, the blower will run for an average of 35 minutes. TILT -12° to +25° Part No. Model No. Dia. CFM Dimensions (W” x D” x H”) Weight 910-1880 VS1.3H-18-0.9 HURST® Jaws of Life® E3™/EWXT™ 9Ah or 5Ah Rescue Batteries. 18″ 10,887 23.75”L x 25”H x 15.25”D 50 lbs. -
Tempest VS-1.3M Tech Series Powered by MILWAUKEE M18 REDLITHIUM HIGH OUTPUT HD12.0 Batteries
Price range: $7,103.02 through $7,563.53Tempest VS1.3M Tech Series, powered by 1 and up to 3 removable MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries, delivers power & versatility 65-Minute Run-Time With 1 and up to 3 removable MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries, the blower will run for an average of 65 minutes. Over 10,000 CFM Tested to AMCA Standards A tapered lightweight steel shroud and uniquely designed composite impeller delivers constant air volume (CFM), velocity and pressure from the VS-1.3M Removable Batteries Powered by 1 and up to 3 removable MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries. AVAILABLE SHORE POWER Every Tempest Battery-Powered Blower/Fan is out-of-the-box available Shore Power compatible Only 55 lbs. with all 3 batteries The welded tubular aluminum frame design makes it easy to roll or lift. Increased depth for greater stability and Large 6” wheels for ease of rolling over obstacles US Patent #.: US 11,333,291 B2 Other Features - Variable Speed motor rated at IP65 - Ultra-Light-air straightener grill and composite impeller - LED flow-path lighting positioned low for visibility below the smoke - Tapered lightweight steel shroud maximizes airflow performance - Ergonomic patent-pending frame design with transverse wheels - Small Footprint 23.75”L x 25”H x 15.25”D (Half the size of a gas blower) - Dynamic Battery Control System that protects the battery during charge/discharge as well as monitors all cells for optimum performance and diagnostics. PRODUCT CHARACTERISTICS The Tempest® Tech Series is an innovative line of positive pressure blowers featuring ergonomic design features and leading edge motor technology and performance. Tech Series blowers are engineered for performance, durability, versatility, and ease of use. VS-1.3M Tech Series powered by MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries, is built for power & versatility. Type VS-1.3M Tech Series powered by MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries IMPELLER 18″ Diameter Composite impeller FRAME Rugged, Lightweight, Welded Tubular aluminum. US Patent #.: US 11,333,291 B2 SHROUD Tapered light weight steel shroud maximizes airflow performance WHEELS 6″ High Impact Rubber GRILL Thin-Vane air straightener grill. MOTOR/DRIVE Variable Speed motor rated at IP65 BATTERY With 1 and up to 3 removable MILWAUKEE® M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Batteries, the blower will run for an average of 65 minutes. TILT -12° to +25° Part No. Model No. Dia. CFM Dimensions (W” x D” x H”) Weight 910-1870 VS1.3M no batteries/no charger. 18″ >10,000 23.75”L x 25”H x 15.25”D 45 lbs. 910-1870A VS1.3M with 3 batteries and 1 Multi-Bay charger. 18″ >10,000 23.75”L x 25”H x 15.25”D 55 lbs. 910-1870B VS1.3M with 3 batteries and 1 Single-Bay charger. 18″ >10,000 23.75”L x 25”H x 15.25”D 55 lbs. -
Tempest Warehouse Cooling Kit
Price range: $3,897.10 through $3,953.18Everything you need to provide effective cooling over a large work area. Connect Smooth Bore Ducting to the fan and Stabilizer, install the Misting Ring, run the ducting through the job site and cut holes where you need to deliver cool air. Everything you need to provide effective cooling over a large work area. Connect Smooth Bore Ducting to the fan and Stabilizer, install the Misting Ring, run the ducting through the job site and cut holes where you need to deliver cool air. 24-IND Package: Part No. 913-1563 24-HD Package: Part No. 913-1561 Includes: Tempest Fan – 24-IND (Shown) or 24-HD Accessories – 500 ft. roll of 6 mil. Smooth Bore Ducting (Not Shown) – Misting Ring – Smooth Bore Stabilizer – Pair of Ratchet Tie-Down Straps -
Tempest WD-18 Hydraulic Powered Fan
$3,390.40The TEMPEST hydraulic fans can be used when the operational constraints require them. Powerful Water Drive Engine Aluminum Water-driven motor with DSP 65 coupling, cutoff and control valve, and pressure gage. Welded Steel Roll Cage Frame Welds eliminate the need to continuously maintain/tighten nuts and bolts. Turbo 2000 Shroud By redesigning the inward curve and front of the shroud, the Turbo 2000 increases air velocity by up to 30%. AirFlex Composition Impeller Uniquely designed impellers deliver maximum air volume (CFM), velocity, and pressure from each Tempest Power Blower. PRODUCT CHARACTERISTICS The TEMPEST hydraulic fans can be used when the operational constraints require them. Part No. Model No. Diameter HP CFM Dimensions (W” x D” x H”) Weight 910-1123 WD-18 18″ NA 30,076 22.75″ x 21″ x 24.25″ 70 lbs.