Texsteam
Showing 136–180 of 1667 results
-
Texsteam P86-025100-0200
$4.00 -
Texsteam Series 1200 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13Designed specifically for operation on a beam pumped oil well, the Texsteam Series 1200 Chemical Injection pumps are positive displacement type pumps powered by direct connection to the movement of a walking beam, rod line or rocker arm. The connection is made by a length of nominal pipe, or a wire line. The unit pumps on the upstroke of the beam action. On the downstroke, the injector arm returns to its set position. The ratchet mechanism is housed in a precision-bored, heavy cast gray iron case and is submerged in oil for long life. The pump head design is efficient because of the horizontal plunger and vertical check valves; virtually trouble-free; easy to maintain; has stainless steel trim in standard heads; and a built-in to aid in priming, check pump action and catch chemical samples and external packing gland. The box assembly is heavy cast gray iron for maximum rigidity and has a galvanized lid and rigid galvanized lever arm. The pump head can be easily removed for cleaning and maintenance. An additional pump head can be installed if more volume is required or if there is a need to pump dissimilar fluids. A wide choice of model and plunger sizes is available. The Series 1200 can be supplied with or without unitized chemical tanks or with two mounted tanks or with tanks of various capacity and materials to suit the operating requirements. -
Texsteam Series 2200 Electric Pump
Price range: $2,140.02 through $3,590.13Maximum discharge pressure of 1,000 psi (69 Bar). Maximum volume of 61 gallons per day (122 gallons per day for Duplex model). Duplex version permits increased single chemical volume to different location, or different chemicals to be injected into either a common feed line or alternate locations. Stroke adjustment feature allows for precise low-volume injection rates, and can be adjusted while the pump is in operation. 1/4 Horsepower motors are available in single phase or three phase voltages, with totally enclosed, non-ventilated (TENV) or explosion-proof enclosures. The geared motor and gear reducer assembly is available in 15, 30, or 60 strokes per minute (SPM) versions to accommodate multiple chemical injection demands. Motors are NRTL third-party certified by CSA/UL for use in hazardous locations. Standard fluid ends are 316 grade stainless steel. Four standard plunger sizes are available: 3/16″, 1/4″, 3/8″, and 1/2″. Modular body design allows for easily interchangeable fluid ends. Standard oil-less design requires less lubrication and decreased maintenance demands. -
Texsteam Series 2400 Electric Pump
Price range: $6,048.82 through $22,043.88The Texsteam Series 2400 chemical injection pump is designed to deliver precise amounts of treatment chemicals for oil and gas production facilities, pipelines, process plants and other applications where a rugged, electrically driven positive displacement pump is required. The Series 2400 chemical injection pump utilizes C-faced motors and gear reducers available in 30 or 60 strokes per minute (SPM) configurations to address a variety of flow and pressure requirements. The Series 2400 pump is available in either a simplex or duplex configuration and has the flexibility to utilize plunger sizes of 1/2″, 3/4″, 1″, or 1-1/4″ to accommodate a wide number of pressures, flow rates or chemicals with one pump assembly. Features One horsepower motor is standard, and is available in single or three phase voltages, TEFC or explosion-proof enclosures and suitable for 50 or 60 Hertz applications. Two (2) horsepower motors are also available as an optional selection. Each pump head is independently adjustable while running for precise delivery of product, from 0-100 percent of capacity with repeatable accuracy to 1 percent of set point. A selection of packing materials is available to address a wide variety of chemical applications. Optional ceramic plungers are available for aggressive applications and to provide longer packing life. -
Texsteam Series 2500 Electric Pump
Price range: $1,626.10 through $8,448.93The 2500 Series of Texsteam chemical injection pumps are electric driven, positive displacement pumps utilizing C-faced motors and common gear reducers. The gear reducers are available in 15, 30, 60 and 120 strokes per minute configurations. By utilizing even further flexibility of a wide variety of plunger sizes, the 2500 Series can fill many application requirements of different flow and pressures. Maximum discharge pressure: 6,000 PSI (414 bar) w/ 3/16” plunger Maximum volume 139 gallons per day (528 liters per day) w/ 1/2” plunger Each head is adjustable while running Available simplex, duplex, triplex, or quadruplex configurations Mix or match head sizes – pump the same or different chemicals Available in four stroke rates: 15, 30, 60 or 120 strokes per minute Each head is independently coupled – user friendly in the field 1/2 horsepower motor standard; 1 or 3 phase, TEFC or explosion proof; 50 or 60 hertz Available with 3/16”, 1/4”, 3/8” or 1/2” plunger -
Texsteam Series 4300 Electric Pump
Price range: $2,197.64 through $16,773.19The Texsteam Series 4300 chemical injection pump is a rugged, easy to maintain proportioning pump offering a steady and precise flow of injected chemical treatments for your oil and gas, pipeline, and process plant operations,. The electrically driven positive displacement design incorporates an integral worm gear drive with three available ratios and six (6) different plunger sizes to provide a wide selection of volumes and pressures. An optional 10:1 ratio externally mounted gear reducer is available for feed rates as low as half a pint per day. Flow rates from .063 GPD to 325 GPD per head. Discharge pressures from 150 psig to 5000 psig. Motors are available in single or three-phase voltages and in TENV or explosion-proof enclosures. 10:1 ratio gear reducer option can provide flow rates from 1/2 pint per day to 1.25 GPD. The integral gear drive and crosshead mechanism are housed in a durable cast iron housing with a sight gauge to monitor lubrication level. The output gear is made from a high-strength alloy iron, and is bearing supported for maximum rigidity and reliable performance. A gasketed gear box cover provides a positive barrier against moisture, dirt, or other contaminants entering the gear box assembly. The liquid end sizes are interchangeable and can be adjusted while the pump is in operation. A selection of packing materials to address a wide variety of chemical applications. Options such as stainless steel tanks, tank gauges, and line check valves for specific customer requirements -
Texsteam Series 5000 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13Texsteam Series 5000 chemical injection pumps are positive displacement units powered by an integral gas/air motor. These pumps fill the requirements of a broad range of applications because of their ability to achieve high discharge pressures (up to 12,000 psig) and wide volume ranges. A horizontal plunger and vertical check valve arrangement provide high operating efficiency. The standard pump head has a Ductile Iron body and stainless steel trim. Stainless steel heads are available for high corrosive applications. A built-in priming valve facilitates pump head priming, enables the operator to easily check pump operation, and offers a sample-catching device. The pump frame and body castings are high-strength aluminum. The operating mechanism strokes in oil and is gasket sealed to protect against dust and other atmospheric influences. Oil-less models are also available. A standard equipment safety valve offers protection against accidental overpressure of the main diaphragm. The adjustable packing is equipped with lantern ring and a grease jack (except on 11 /4” head) for lubricating the plunger and packing to provide long life. Applications Introducing detergents in air-gas drilling operations Blending foaming agents in water laden gas wells High pressure addition of fluid compounds in blending and chemical processing Introduction of de-salting agents, de-emulsifiers, inhibitors and flocculants in crude oil and gas steams High- and low-pressure lubrication systems Methanol and alcohol injection in gas systems to prevent freezing General high pressure injection applications Fluid blending of extreme pressures within varied, controlled processes Hydrostatic testing Glycol circulation Water treatment -
Texsteam Series 5100 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13Texsteam 5100 Series Chemical Injectors are single acting, positive displacement plunger-type pumps, powered by gas via a diaphragm with a spring return. Speed control is accomplished by regulating the exhaust gas discharge flow. Reversal is accomplished by a direct spring-actuated switching mechanism (rotary three-way valve). Volume is controlled by the speed of the pump and by the stroke length, either 1” (25.4 mm) or 1/3” (8.5 mm) lengths. The 5100 Series is capable of pumping high pressures with gas pressure as low as 8 psig (0.6 bar) and handling volume output up to 30 gallons (113 liters) per day. The pump is lightweight, compact and contains a minimum of working parts for easy maintenance. Each fluid pump head is equipped with a stainless steel plunger, ball checks, ball check springs, top seat, top bushing, bottom bushing, adjustable VEE type packing and a priming valve. The packing yoke is equipped with a drain to monitor for possible packing leaks. Because of the sealed bearings, the unit is oil-less. Application The introduction of de-emulsifiers, solvents, corrosion inhibitors, de-salting agents and flocculants in oil country operation High pressure bearing lubrication Water treatment Blending processes in refining and process plants Injection of methanol in gas pipelines Hydrostatic testing Sampling -
Texsteam Series 6100 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13The Texsteam 6100 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive displacement, single or double acting, reciprocating pumps. The basic pump is designed for use with three fluid ends, a 1-1/4″ and 2-3/4″ diameter plunger and a 4″ diameter piston. The fluid ends are interchangeable with the modular power cylinder and can be assembled as single ended units or double ended units in all combinations of sizes. All fluid ends are designed to withstand maximum output force of the power cylinder. Due to the balanced valving of the power cylinder, it is, in theory, possible to operate the pump against a back pressure equal to the inlet power gas pressure; however, a differential in these two pressures must be maintained for the pump to stroke. When the supply gas is piped off to other areas, the pilot valves may also be connected to the pump exhaust manifold system. All fluid ends are designed with removable cartridge type ball check valves. These valves may be replaced without disconnecting the suction and discharge piping. -
Texsteam Series 9000 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13The Series 9000 Double Diaphragm Utility Pump is a double acting, positive displacement pump operated on either air or gas. A range of operating power pressures from 5 to 100 psig provide discharge volumes up to 60 gallons of water and discharge pressures up to 60 psig through 2” suction and discharge ports. It handles any liquid from alcohol to mud, liquids containing solids 1/4” in diameter with ease, and liquids containing abrasives with a minimum of wear. The 9000 can operate completely submerged. It is smokeless, quiet, and fireproof. This pump needs no priming for suction lifts to 14 feet of water, and can perform suction lifts to 23 feet when primed. -
Texsteam Series MX-5 Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.131 to 62 GP H / 1 to 60 Strokes Per Minute Duplex Models Available No springs in the power cylinder-positive cycle operation Adjustable packing allows for planned maintenance Easily field serviceable Ability to recycle unused supply gas Lightweight Wide range of service gas pressure Minimum – 30 psig Maximum – 145 psig Option of ceramic plungers – longer life on the plunger and packing Variety of packing allows for many chemical compatibilities -
Texsteam Series MXG Gas/Pneumatic Pump
Price range: $2,140.02 through $3,590.13The Texsteam MXG pump is the first to market MX pneumatic technology with new low flow capabilities and fewer components to provide the most accurate and dependable product for your pneumatic driven injection needs. The spring-free design is easier to repair with no spring used in the pneumatic process The pump incorporates differentiated needle valves to regulate the speed of the pump more accurately “Stall-free pump” – the MXG delivers improved low flow capabilities combined with increased inlet pressure to expand minimum strokes per minute range ZERO BLEED* solution – the MXG is capable of 100% exhaust capture, eliminating fugitive emissions -
Texsteam SK4947TA
$9.45 -
Texsteam SPT 0001
$727.48 -
Texsteam SPT 0002
$1,454.96 -
Texsteam SPT 0004
$116.25 -
Texsteam SPT 0010 – Chemical Pump Spare Part
$4,726.82Texsteam SPT 0010 — Genuine spare part for Texsteam chemical metering pumps.Part Number: SPT 0010Brand: TexsteamApplication: Chemical metering pumpsCondition: New / OEMContact us for availability and lead time. -
Texsteam SPT 0012
$339.19 -
Texsteam TA 0001
$45.57 -
Texsteam TA 0009
$22.00 -
Texsteam TA 0010
$59.92 -
Texsteam TA 0011
$14.95 -
Texsteam TA 0013
$23.70 -
Texsteam TA 0020
$5.18 -
Texsteam TA 0022
$142.65 -
Texsteam TA 0023
$23.34 -
Texsteam TA 0025
$103.54 -
Texsteam TA 0032
$191.57 -
Texsteam TA 0035
$43.99 -
Texsteam TA 0043
$19.76 -
Texsteam TA 0047
$194.38 -
Texsteam TA 0050
$103.33 -
Texsteam TA 0051
$54.66 -
Texsteam TA 0053
$6.67 -
Texsteam TA 0054
$6.47 -
Texsteam TA 0055
$76.88 -
Texsteam TA 0058
$7.99 -
Texsteam TA 0059
$107.33 -
Texsteam TA 0064
$66.66 -
Texsteam TA 0065
$161.80 -
Texsteam TA 0075
$15.11 -
Texsteam TA 0077
$6.47 -
Texsteam TA 0101
$94.02 -
Texsteam TA 0107
$19.03 -
Texsteam TA 0123
$68.48