South Coast Products
Showing all 4 results
-
Chemola Desco 1055 – 5 Gal Pail
Premium Synthetic Valve Lubricant Chemola Desco 1055 is a state-of-the-art synthetic lubricant that is exceedingly resistant to hydrocarbons, water and hydrochloric acid. Chemola Desco 1055 is formulated with solid lubricants to provide lubrication to 600˚F. Recommended Uses: Frac applications, condensate, aliphatic hydrocarbons, butane, diesel fuel, hot asphalt, hot gases, hot oil, LPG, natural gas, sour gas and oil. Used worldwide for hydrogen sulfide and carbon dioxide applications. Typical Characteristics Appearance: Silver-black, smooth, tacky NLGI: 1.5-2 Penetration (ASTM D217): 280-310 Worked Penetration, 60x (ASTM D217): 280-310 Base Oil: Synthetic ester blend Base Oil Viscosity: 10,000 cSt at 40°C Base Oil Pour Point: -15°F (-9 °C) Thickener: Inorganic Additives: Antioxidant package Solids Content: Molydisulfide, natural minerals Dropping Point (ASTM D566): >500°F (260°C) Flash Point: >450°F (232°C) Temperature Range: 0°F to 600°F (-18°C to 316°C) Storage Stability (50°C, 120 days): Pass Resistance to Water (FTM 5415): Pass Resistance to 50% Ethanol in Water (FTM 5415): Pass Resistance to Synthetic Condensate (FTM 5415 mod): Pass Resistance to Mineral Spirits (FTM 5415 mod): Pass Resistance to 20% Hexane in Mineral Spirits (FTM 5415 mod): Pass Resistance to Diesel Fuel (FTM 5415 mod): Pass Resistance to HCI(aq): Pass Resistance to Brine, 135°F (53°C) (ASTM D1748 mod): Pass SDS -
Chemola Desco 111 (LT) – 5 Gal Pail
Low Temp Hydrogen Sulfide Service Chemola Desco 111 (LT) is designed for use in valves under arctic conditions (to -75 F). 111-LT is extremely resistant to hydrogen sulfide and will not mix with water, preventing freeze-up in the valve. Because it provides good metal protection and is particularly water resistant, it is the recommended lubricant for frac valves. Recommended Uses Chemola Desco 111-LT can be used in the presence of diesel fuel, gas and well condensate, hydrogen sulfide, CO2, sour crude and standard crude. Recommended for frac valves. Typical Characteristics: Appearance: Black, smooth NLGI: 1 Penetration (ASTM D217): 320-330 Worked Penetration, 60x (ASTM D217): 330-350 Base Oil: Synthetic hydrocarbon Base Oil Viscosity: 30 cSt at 40°C Base Oil Pour Point: -80 °F (-62 °C) Thickener: Inorganic Additives: H2S/Corrosion Inhibitor Solids Content: Graphite Specific Gravity: 0.8 Density (lb/gal): 6.9 Dropping Point (ASTM D566): >500°F (260°C) Flash Point: >470°F (243°C) Temperature Range: 75°F to 350°F (-57°C to 177°C) Four-Ball Wear (ASTM D2266): 0.7mm Four-Ball EP Weld Point (ASTM D2596): 160 kgf SDS -
Chemola Desco Frac-Seal – 5 Gal Pail
Water Resistant EP Grease Chemola Desco Frac-Seal is an enhanced-lubricity calcium sulfonate grease with excellent water resistance, pumpability and metal adhesion. It is very stable, resistant to oxidation and high temperatures. Among other applications, it is formulated for use where exposure to harsh elements is a major consideration. Recommended Uses: Frac valves, marine applications, and general industrial use. Desco Frac-Seal can also be used as packing lubrication. Typical Characteristics: Appearance: Amber, smooth NLGI: 2 Penetration (ASTM D217): 265-295 Worked Penetration, 60x (ASTM D217): 265-295 Base Oil: Mineral Oil Base Oil Viscosity: 480 cSt at 40°C Base Oil Viscosity: 30 cSt at 100°C Base Oil Viscosity Index: 95 Base Oil Pour Point: 20°F (-7°C) Thickener: Calcium complex Specific Gravity: 0.9 Density (lb/gal): 7.5 Dropping Point (ASTM D566): >550°F (288°C) Flash Point: 560°F (300°C) Temperature Range: 0°F to 450°F (-18°C to 232°C) Four-Ball Wear (ASTM D2266): 0.45mm Four-Ball EP Weld Point (ASTM D2596): 620 kgf Load-Wear Index (ASTM D2596): 80 Timken OK: 65 SDS -
Desco 960 Plus – Tote 2340 lbs
Trusted Body Fill Desco 960 Plus is an economical body-fill grease designed to purge water and other contaminants from body cavities, and to protect valves from the damage and corrosion that occurs during storage and other site conditions. Recent formulation enhancements have improved resistance and metal adherence to deliver reliable protection and resistance across a wider temperature range. Recommended Uses: Excellent for lubricating valves, post-hydrotesting, prior to storage or shipping. Typical Characteristics: Appearance: Black, smooth NLGI: 2 Penetration (ASTM D217): 265-275 Worked Penetration, 60x (ASTM D217): 265-275 Base Oil: Mineral oil Base Oil Viscosity: 145 cSt at 40°C Base Oil Pour Point: -10°F (-23°C) Thickener: Inorganic Additives: Antioxidant/corrosion inhibitor package Solids Content: Graphite Specific Gravity: 0.9 Density (lb/gal): 7.8 Dropping Point (ASTM D566): >500°F (260°C) Flash Point: >440°F (227°C) Temperature Range: -18°F to 350°F (-28°C to 177°C) SDS