Shaw-Box
The material handling industry relies heavily on wire rope products as lifting solutions in industrial facilities. Shaw-Box hoist systems are engineered to meet the safety and performance demands of today’s industries. These compact, easy-to-maintain hoist systems are available in a wide range of capacities and are suitable for a broad array of industrial lifting applications.
Whether your application requires an indoor or outdoor setup, air-powered or electric wire rope hoist, or general-purpose or specialized equipment, Shaw-Box has the right solution for your needs.
If you are looking for a high-quality, high-performance lifting solution, PE Energy offers a wide selection of Shaw-Box wire rope hoists to meet your industrial lifting requirements. Contact PE Energy today to request a quote for the Shaw-Box hoist that best fits your application.
Showing all 9 results
-
Shaw-Box 800 Series Electric Wire Rope Hoist and Trolley
Shaw-Box 800 Series Wire Rope Hoists are ideally suited for virtually any lifting application. Their modular design and versatility provide a wide range of capacities, lifts, hoist speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill. FEATURES AND BENEFITS: Lug, Push, Geared or Motorized Trolley Easily accessible control enclosure facilitates maintenance D.C. disc motor brake for smooth braking action High torque, heavy-duty hoist motor for smooth hoisting action Block operated upper limit stop to limit upward hook travel Convenient one-handed pushbutton control for easy operation of all motions 115 volts at push button for operator safety Push-button cable with built in strain reliever cable as used on single speed hoist applications(All others use a separate steel strain reliever cable.) Improved plow steel pre-formed cable for maximum strength and life Full-swiveling, heat-treated forged an existing facility, reducing or steel hook with spring loaded latch Shrouded lower block to help prevent pinched fingers Alloy aluminum gear case and cover is lightweight yet rugged Oil level plug permits easy inspection of oil level Anti-friction bearings throughout for a long lasting hoist drive train Positive action mechanical load lowering control brake, also acts as a part of the hoist holding brake system Triple reduction helical/spur gearing operates in oil bath lube for maximum gearing life Deep grooved, large diameter rope drum helps prevent rope mounting from an overhead structure, or with any of our overwrap for longer wire rope life Heavy welded steel frame ensures precise fit for long hoisting machinery life Magnetek frequency control drives are available as an option for hoist and trolley. Product image above may show optional features and accessories not included on standard models. Consult with a sales rep or with the product catalog for more information. Shaw-Box 800 Electric Wire Rope Hoist Operating, Maintenance & Parts Manual Shaw-Box Series 800 Electric Wire Rope Hoist Manual Shaw-Box Series 800 Wire Rope Hoist Brochure -
Shaw-Box SK 15 Tons 13 fpm 20 ft Wire Rope Hoist – SKC-B15-020S413-2
$29,370.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Base Mounted Rated Lift Capacity: 15 U.S. tons Reeving Style: 4-Part Single Reeved Maximum Lifting Speed: 13 ft/min (4.0 m/min) Maximum Lifting Distance: 20 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021) -
Shaw-Box SK 15 Tons 13 fpm 20 ft Wire Rope Hoist – SKC-L15-020S413-2
$33,698.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Underhung Motorized Trolley Rated Lift Capacity: 15 U.S. tons Reeving Style: 4-Part Single Reeved Maximum Lifting Speed: 13 ft/min (4.0 m/min) Maximum Lifting Distance: 20 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021) -
Shaw-Box SK 15 Tons 13 fpm 33 ft Wire Rope Hoist – SKC-B15-033S413-2
$30,339.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Base Mounted Rated Lift Capacity: 15 U.S. tons Reeving Style: 4-Part Single Reeved Maximum Lifting Speed: 13 ft/min (4.0 m/min) Maximum Lifting Distance: 33 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021) -
Shaw-Box SK 15 Tons 13 fpm 33 ft Wire Rope Hoist – SKC-L15-033S413-2
$34,740.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Underhung Motorized Trolley Rated Lift Capacity: 15 U.S. tons Reeving Style: 4-Part Single Reeved Maximum Lifting Speed: 13 ft/min (4.0 m/min) Maximum Lifting Distance: 33 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021) -
Shaw-Box SK 7.5 Tons 25 fpm 56 ft Wire Rope Hoist – SKD-B07-056S225-2
$33,502.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Base Mounted Rated Lift Capacity: 7.5 U.S. ton Reeving Style: 2-Part Single Reeved Maximum Lifting Speed: 25 ft/min (7.6 m/min) Maximum Lifting Distance: 56 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021) -
Shaw-Box SK 7.5 Tons 25 fpm 56 ft Wire Rope Hoist – SKD-L07-056S225-2
$44,469.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Underhung Motorized Trolley Rated Lift Capacity: 7.5 U.S. ton Reeving Style: 2-Part Single Reeved Maximum Lifting Speed: 25 ft/min (7.6 m/min) Maximum Lifting Distance: 56 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021) -
Shaw-Box SK 7.5 Tons 25 fpm 93 ft Wire Rope Hoist – SKD-B07-093S225-2
$33,750.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Base Mounted Rated Lift Capacity: 7.5 U.S. ton Reeving Style: 2-Part Single Reeved Maximum Lifting Speed: 25 ft/min (7.6 m/min) Maximum Lifting Distance: 93 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021) -
Shaw-Box SK 7.5 Tons 25 fpm 93 ft Wire Rope Hoist – SKD-L07-093S225-2
$46,640.00The Shaw-Box SK delivers industry-leading technology, safety, and performance for your lifting applications in a compact and easy-to-maintain design. When you need quality and performance in a wire rope hoist, turn to the Shaw-Box SK hoist from Columbus McKinnon. SPECIFICATION: Hoist Suspension Type: Underhung Motorized Trolley Rated Lift Capacity: 7.5 U.S. ton Reeving Style: 2-Part Single Reeved Maximum Lifting Speed: 25 ft/min (7.6 m/min) Maximum Lifting Distance: 93 Hoist Motor HP: 14.8 Hoist Duty Classification: HMI Class H4 / ISO M5 Trolley Control Type: Two Speed Trolley Gage: 0 FEATURES AND BENEFITS: WIDE RANGE OF CAPACITIES AND LIFTS Monorail units up to 30 tons and top-running, double-girder units up to 55 tons. Standard lifts up to 131 ft. Metric rated models also available. EXTENSIVE SAFETY FEATURES Standard safety features include paddle limit switch, adjustable geared limit switch, motor temperature control, and overload protection. FLEXIBLE CONFIGURATIONS Hoists can be configured to your unique application needs. Available in 5 frame sizes with 16 load capacity variants. SMOOTH OPERATION With an integrated motor management module and flywheel trolley motors, the SK features extremely smooth starting and braking with starts and stops for extended brake life. COMPACT DESIGN Exceptionally short approach allows for optimal use of work area when space is limited. Paddle limit switch allows for lowest headroom possible while maintaining safe operation. Low-headroom monorail units are extremely compact due to U-shape design. RELIABLE PERFORMANCE IN HEAVY-DUTY APPLICATIONS Hoists available with H3, H4, and H4+ duty cycles. LOW MAINTENANCE High-quality components designed for safety and longevity, providing you with minimal downtime and a low total cost of ownership. Local availability of common spare parts means that your products can be serviced quickly, helping to reduce downtime. COMPLIANCE WITH INDUSTRY STANDARDS Hoists meet CMAA and HMI standards. CSA labeled. Explosion-protected models available in compliance with NEC guidelines. BASE-MOUNT Can be used as stationary hoisting or towing equipment, for example in systems manufacturing. The rope lead-off angle, the hoist mounting, and the mounting position of the hoist motor can be adjusted as needed. Available for 1-55 ton capacities. TOP-RUNNING, DOUBLE-GIRDER Extremely compact with minimal hook approach and headroom dimensions. Flexible design ensures all four wheels are in contact with the girder. Available for 1-55 ton capacities. Control Options 2-SPEED CONTROL 2-speed models come standard with 6:1 turndown, and the control panel is mounted to the gearbox. STANDARD VFD Standard VFD hoist and flux vector hoist configurations come standard with controls housed in a separate NEMA-rated enclosure mounted to underhung hoists. The enclosure is shipped loose for the greatest flexibility in top-running double girder and base-mount configurations. Standard VFD hoists are also equipped with an encoder mounted to the gearbox for direction and overspeed detection, improving the safe operation of your wire rope hoist. ADVANCED VFD Advanced VFD configurations offer the greatest positional accuracy. Using variable speed control, micro-positioning capabilities enable precision load control while decreasing load bounce and swing. In addition, the 10:1 speed control gives operators the ability to "float" the load with full torque at 0 rpm. LS Open Loop Vector Motor 4H42, 4H71, 4H72 Manual Supplement YPARTS-0724 Yale/Shaw‐Box Parts List Shaw-Box SK Brochure Yale YK/Shaw-Box SK Manual v.A-E Frame Rev AF Yale YK and Shaw-Box SK Tandem Electric Wire Rope Hoists Brochure Yale YK/Shaw-Box SK Manual v.F-G Frame Rev AC SLE3 Operation Manual (ba-o.4.1.3-en-2.2-y) (2021)