John Deere
Showing 721–765 of 869 results
-
TY16243 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-1/4A (in.): 1-13/16B (in.): 5-1/8Bolt size (in.): 1/2Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16244 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-3/8A (in.): 1-13/16B (in.): 5-1/8Bolt size (in.): 1/2Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16245 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-7/16A (in.): 1-13/16B (in.): 5-1/8Bolt size (in.): 1/2Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16246 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-1/2A (in.): 1-15/16B (in.): 5-3/8Bolt size (in.): 1/2Bearing o.d. (mm): 80The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16247 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-3/4A (in.): 2-1/16B (in.): 5-7/8Bolt size (in.): 1/2Bearing o.d. (mm): 85The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16248 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 1-15/16A (in.): 2-3/16B (in.): 6-7/32Bolt size (in.): 5/8Bearing o.d. (mm): 90The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16249 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 2A (in.): 2-7/16B (in.): 6-15/16Bolt size (in.): 5/8Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16250 – Cast Iron Pillow Block with Bearing
Shaft dia. (in.): 2-3/16A (in.): 2-7/16B (in.): 6-15/16Bolt size (in.): 5/8Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16251 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 3/4A (in.): 3-3/8B (in.): 2-1/2C (in.): 27/64Bearing o.d. (mm): 47The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16252 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1A (in.): 3-3/4B (in.): 2-3/4C (in.): 29/64Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16253 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/8A (in.): 4-1/4B (in.): 3-1/4C (in.): 29/64Bearing o.d. (mm): 52Shaft dia. (in.): 1A (in.): 3-3/4B (in.): 2-3/4C (in.): 29/64Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16254 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/16A (in.): 4-1/4B (in.): 3-1/4C (in.): 29/64Bearing o.d. (mm): 62Shaft dia. (in.): 1-1/8A (in.): 4-1/4B (in.): 3-1/4C (in.): 29/64Bearing o.d. (mm): 52Shaft dia. (in.): 1A (in.): 3-3/4B (in.): 2-3/4C (in.): 29/64Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16255 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/4A (in.): 4-5/8B (in.): 3-5/8C (in.): 33/64Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16256 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/8A (in.): 4-5/8B (in.): 3-5/8C (in.): 33/64Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16257 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-7/16A (in.): 4-5/8B (in.): 3-5/8C (in.): 33/64Bearing o.d. (mm): 72The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16258 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/2A (in.): 5-1/8B (in.): 4C (in.): 33/64Bearing o.d. (mm): 80The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16259 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/4A (in.): 5-3/8B (in.): 4-1/8C (in.): 33/64Bearing o.d. (mm): 85The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16260 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 1-15/16A (in.): 5-5/8B (in.): 4-3/8C (in.): 43/64Bearing o.d. (mm): 90The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16261 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 2A (in.): 6-3/8B (in.): 5-1/8C (in.): 43/64Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16262 – Cast Iron 4-Bolt Flange with Bearing
Shaft dia. (in.): 2-3/16A (in.): 6-3/8B (in.): 5-1/8C (in.): 43/64Bearing o.d. (mm): 100The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16263 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 3/4A (in.): 2-9/16B (in.): 4-13/32C (in.): 3-17/32D (in.): 25/64Bearing o.d. (mm): 47The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16264 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1A (in.): 2-3/4B (in.): 4-7/8C (in.): 3-29/32D (in.): 15/32Bearing o.d. (mm): 52The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges.Features and benefitsBearingsLonger life - less noise, vibration, and frictionSuper-finished inner and outer ringsDouble-filtered, polyurea-based greaseHigher-quality, Grade-10 ballsCast housingsPrecision machinedGray powder coatedCan be mounted and will operate in any positionEach unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16265 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/8 A (in.): 3-1/8 B (in.): 5-9/16 C (in.): 4-19/32 D (in.): 29/64 Bearing o.d. (mm): 62 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16266 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/16 A (in.): 3-1/8 B (in.): 5-9/16 C (in.): 4-19/32 D (in.): 29/64 Bearing o.d. (mm): 62 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16267 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/4 A (in.): 3-5/8 B (in.): 6-1/8 C (in.): 5-1/8 D (in.): 33/64 Bearing o.d. (mm): 72 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16268 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/8 A (in.): 3-5/8 B (in.): 6-1/8 C (in.): 5-1/8 D (in.): 33/64 Bearing o.d. (mm): 72 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16269 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-7/16 A (in.): 3-5/8 B (in.): 6-1/8 C (in.): 5-1/8 D (in.): 33/64 Bearing o.d. (mm): 72 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16270 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-1/2 A (in.): 4-1/8 B (in.): 6-3/4 C (in.): 5-21/32 D (in.): 33/64 Bearing o.d. (mm): 80 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16271 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-3/4 A (in.): 4-3/8 B (in.): 7-1/16 C (in.): 5-53/64 D (in.): 33/64 Bearing o.d. (mm): 85 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16272 – Cast Iron 2-Bolt Flange with Bearing
Shaft dia. (in.): 1-15/16 A (in.): 4-9/16 B (in.): 7-1/16 C (in.): 6-3/16 D (in.): 43/64 Bearing o.d. (mm): 90 The fully mounted units ensure proper bearing/cast housing fit. Tight tolerances create the optimum fit and provide self-alignment with anti-rotation pins. Many competitive brands do not have the precise fit due to non-matched bearings and housings/flanges. Features and benefits Bearings Longer life - less noise, vibration, and friction Super-finished inner and outer rings Double-filtered, polyurea-based grease Higher-quality, Grade-10 balls Cast housings Precision machined Gray powder coated Can be mounted and will operate in any position Each unit is pre-lubricated and contains a grease zerk for relubing if required. -
TY16286 – Bearing and Locking Collar
Shaft dia. (in.): 3/4 -
TY16287 – Bearing and Locking Collar
Shaft dia. (in.): 1 -
TY16288 – Bearing and Locking Collar
Shaft dia. (in.): 1-1/8 -
TY16289 – Bearing and Locking Collar
Shaft dia. (in.): 1-3/16 -
TY16290 – Bearing and Locking Collar
Shaft dia. (in.): 1-1/4 -
TY16291 – Bearing and Locking Collar
Shaft dia. (in.): 1-3/8 -
TY16292 – Bearing and Locking Collar
Shaft dia. (in.): 1-7/16 -
TY16293 – Bearing and Locking Collar
Shaft dia. (in.): 1-1/2 -
TY16294 – Bearing and Locking Collar
Shaft dia. (in.): 1-3/4 -
TY16295 – Bearing and Locking Collar
Shaft dia. (in.): 1-5/16 -
TY16296 – Bearing and Locking Collar
Shaft dia. (in.): 2 -
TY16297 – Bearing and Locking Collar
Shaft dia. (in.): 2-3/16 -
TY16330 – Historic John Deere logo, yellow on green
All are heavy-duty knobs with a comfort-grip vinyl coating Brackets for regular and deep spoke wheels provided Includes rubber space adapter to adjust fit on various steering wheels -
TY21428 – 1 in. I.D. x 10 ft. Long (25.4 mm I.D. x 3048 mm long)
Low-pressure Rubber Hose Used to make hydraulic hose for low-pressure applications 200 psi rated For 50 Series Row-Crop Tractors Shipped in bulk length of 10 feet – economical way of making repairs -
TY24861 – 4″ 9000 John Deere Rotary Ejector Air Precleaner (R Model)
Precleaner Inlet Dia.: 4.031" ID Air Flow: CFM Min: 275 Air Flow: CFM Max: 350 Weight: 2.4 lbs Recommended Min Hood Clearance: 4" Rotary air pre-cleaners continuously eliminate debris; therefore no routine maintenance is necessary. These precleaners not only eject severe dust, but they also filter rain, mud, snow, leaves, and other debris before it enters the air intake. The precleaners easily replace or improve ingestive systems. Lower cost per operating hour Extended air filter life Durable polymer molding, long-life bearings Lower overall engine maintenance costs Self-cleaning Non-reflective black coating Work in all weather conditions Reduce downtime Low-profile design Competitively priced Applications Available for most equipment makes and models including those equipped with dust ejector systems or internal precleaners. Parts included in kit description: Precleaner rubber reducer insert; example: 30R20 reduces 3" precleaner· DVP: Dump valve plug 64050, 64060 Metal expansion adaptors 4" to 5", 4" to 6" 67090, 68011, 68013 Metal expansion adaptors 7" to 9"