Skip to content

Products search

pesales@pe-energy.com +1 ( 281 ) 310 – 0628

About PE
- Careers
- Manufacturers
- Blog
- Podcast
- Newsroom
Brands
Products
Obsolete & Rare Parts
Contact Us

About PE
- Careers
- Manufacturers
- Blog
- Podcast
- Newsroom
Brands
Products
Obsolete & Rare Parts
Contact Us

pesales@pe-energy.com +1 ( 281 ) 310 – 0628

Home / Brands / Jet-Lube / Page 5

Jet-Lube

Showing 181–225 of 626 results

Sale!
23915 – Jet-Lube Hdd Kopr 48 lb Pail
Original price was: $520.42.Current price is: $468.38.
Horizontal Directional Drilling Tool Joint & Drill Collar Compound A premium-quality, unleaded compound containing cooper flake, graphite, and other natural extreme pressure and anti-wear additives. HDD KOPR uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE but in a smaller particle size range to accommodate automatic application systems. Benefits Contains no lead or zinc Extreme pressure additives Rust & corrosion inhibitors Sticks to wet joints Smooth grease base for brushability & stability over a wide temperature range Consistent makeup Unequalled resistance to downhole makeup Specially formulated to meet the requirements of the auto-lube system on most major HDD rigs Low pour point oil for optimum low temperature performance Specifications Base Materials: Anhydrous Calcium / Petroleum Certifications: Not classified as marine pollutant – DOT Approval CA2004080025., Conforms to assembly bill 1953 Service Rating: -55°C to 149°C, -65°F to 300°F Equivalent to Ditch Witch 256-025 5 gal Summer Spray TDR SDS
Sale!
23923 – Jet-Lube Hdd Kopr 9.5 lb Pail
Original price was: $120.21.Current price is: $108.19.
Horizontal Directional Drilling Tool Joint & Drill Collar Compound A premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. HDD KOPR uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE but in a smaller particle size range to accommodate automatic application systems. Benefits: Contains no lead or zinc Extreme pressure additives Rust & corrosion inhibitors Sticks to wet joints Smooth grease base for brushability & stability over a wide temperature range Consistent makeup Unequalled resistance to downhole makeup Specially formulated to meet the requirements of the auto-lube system on most major HDD rigs Low pour point oil for optimum low temperature performance Specifications: Base Materials: Anhydrous Calcium / Petroleum Certifications: Not classified as marine pollutant – DOT Approval CA2004080025., Conforms to assembly bill 1953 Service Rating: -55°C to 149°C, -65°F to 300°F TDR SDS
23929 – Jet-Lube HDD Kopr Drum
$5,226.34
What is Jet-Lube HDD Kopr? A premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. HDD KOPR uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE but in a smaller particle size range to accommodate automatic application systems. Which pack is part 23929? Part 23929 is the drum, as the 2026 Jet-Lube price list states it. Jet-Lube numbers these packs of Jet-Lube HDD Kopr on its own product page for the United States, and 23929 is not among them: Part numberPack239231 GAL Pail - 9.5 LB239951.5 GAL Bellow239112 GAL Pail (Clear) - 19 LB239155 GAL Pail - 48 LB239165 GAL Pail (Straight Sided) - 48 LB So 23929 is ordered against the price list rather than against that page. Ask us to confirm the container size before you order. Benefits Contains no lead or zincExtreme pressure additivesRust & corrosion inhibitorsSticks to wet jointsSmooth grease base for brushability & stability over a wide temperature rangeConsistent makeupUnequalled resistance to downhole makeupSpecially formulated to meet the requirements of the auto-lube system on most major HDD rigs Specifications Base Materials Anhydrous Calcium / PetroleumCertifications Not classified as marine pollutant – DOT Approval CA2004080025. Conforms to assembly bill 1953Service Rating -55°C to 149°C -65°F to 300°F Specifications as published by Jet-Lube for HDD Kopr. Frequently asked questions What does part number 23929 come in? 23929 is the Drum, and the price on this page is the price of that pack. Is 23929 sold in other sizes? The same product is numbered 23923, 23995, 23911, 23915, 23916 in its other packs. Ask us for any of them. How do I order this part? Order part 23929 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock.
Sale!
24002 – Jet-Lube Tfw 1/2 pt Brushtop Can
Price range: $21.89 through $262.66
Multipurpose Thread Sealant w/ PTFE TFW 1/2 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C
Sale!
24004 – Jet-Lube Tfw 1 pt Brushtop Can
Price range: $30.47 through $365.69
Multipurpose Thread Sealant w/ PTFE Jetlube TFW 1 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C TDS SDS
Sale!
24023 – Jet-Lube Tfw 10 lb Pail
Original price was: $210.27.Current price is: $189.24.
Multipurpose Thread Sealant w/ PTFE A non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C Featured in our podcast Hear how this product solves real-world reliability problems in our episode Jet-Lube V-2 Thread Sealant: Lead-Free, NSF-61 Potable-Water Sealing to 500°F. Or listen on RSS.com.
Sale!
24024 – JET-LUBE TFW 15 gal drum
Original price was: $1.03.Current price is: $0.93.
Multipurpose Thread Sealant w/ PTFE TFW 1/2 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications of 24024 JET-LUBE TFW 15 gal drum Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C TDS SDS
Sale!
24029 – Jet-Lube Tfw 500 lb Drum – Lined
Original price was: $7,551.47.Current price is: $6,796.32.
Multipurpose Thread Sealant w/ PTFE TFW 50 GAL. DRUM is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C
Sale!
24055 – Jet-Lube Tfw 1/4 lb Brushtop Can
Price range: $7.96 through $191.16
Multipurpose Thread Sealant w/ PTFE TFW 1/4 PT. BRUSHTOP CAN is a non-hardening, non-toxic sealant for sealing and protecting NPT pipe fittings. TFW is specially formulated to seal piping for applications with pressurized air, natural gas, water lines, and fire sprinkler systems, as well as other fluid/air conditions. Benefits of using TFW™ No lead Safe for potable water lines Contains PTFE Non-toxic Non-staining Non-hardening Seals & protects Specifications: Base Materials: Synthetic Certifications: Uniform Plumbing Code (IAPMO) File No. 1282, Federal Spec. TT-S-1732, British Std. 6920, Parts 1 & 2, Nato S-716 Service Rating: 0°F to 500°F, -18°C to 260°C TDS SDS
Sale!
24412 – Jet-Lube J-89 20 lb Pail
Original price was: $224.35.Current price is: $201.91.
Pumpable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-89's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-89 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Pumpable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum
Sale!
24415 – Jet-Lube J-89 50 lb Pail
Original price was: $506.88.Current price is: $456.19.
Pumpable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-89's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-89 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Pumpable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum TDS SDS
Sale!
24423 – Jet-Lube J-89 10 lb Pail
Original price was: $139.15.Current price is: $125.24.
Pumpable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-89's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-89 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Pumpable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum
Sale!
24812 – Jet-Lube J-75 18 lb Pail
Original price was: $237.65.Current price is: $213.89.
Brushable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-75's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-75 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Brushable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum
Sale!
24815 – Jet-Lube J-75 50 lb Pail
Original price was: $553.68.Current price is: $498.31.
Brushable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-75's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-75 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Brushable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum
Sale!
24823 – Jet-Lube J-75 10 lb Pail
Original price was: $132.21.Current price is: $118.99.
Brushable, environmentally preferred, lead-free compound specifically designed for percussion drilling. J-75's highly fortified formulation provides excellent resistance to shock, galling and seizing. Its anti-friction properties are unsurpassed while providing easy thread assembly and disassembly. Under makeup pressure J-75 lubricants “plate” and form a tenacious armored coating that eliminate metal-to-metal contact while penetrating voids, surface imperfections and score marks to increase thread life on steel bits, joints and couplings. BENEFITS: Brushable Lead-free Retards wear Prevents metal-to-metal contact Will not run out of hot threads Will not burn away Water-resistant Prevents rust & corrosion Specifications: Base Materials: Aluminum Complex Petroleum
Sale!
25016 – Jet-Lube Ap-5 35 lb Pail
Original price was: $467.38.Current price is: $420.64.
High-Temp Multipurpose Grease (Black) AP-5 5 gal. pail is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C TDS SDS
Sale!
25024 – Jet-Lube Ap-5 120 lb Keg
Original price was: $1,530.05.Current price is: $1,377.05.
High-Temp Multipurpose Grease (Black) AP-5 50 gal. drum is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C
Sale!
25029 – Jet-Lube Ap-5 400 lb Drum – Lined
Original price was: $5,151.12.Current price is: $4,636.01.
High-Temp Multipurpose Grease (Black) AP-5 15 gal. drum is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C
Sale!
25050 – Jet-Lube Ap-5 14 oz Cartridge
Price range: $14.53 through $435.78
High-Temp Multipurpose Grease (Black) AP-5 14 oz. cartridge is formulated from bentone clay, AP-5 is noted for its high temperature insensitivity, its non-melting and does not thicken excessively at temperatures as low as 0F (-18C). It has mechanical stability, is water resistant, displays high stability, provides excellent adhesion to metals, prevents wear and has superior storage life. AP-5 contains molybdenum disulfide, oxidation inhibitors, corrosion inhibitors and metal deactivators. It offers positive protection for extreme services, which require heavy duty lubricant performance. Ideal for oven chains. Benefits of using AP-5™ Rust & corrosion protection Non-melting No Dropping Point Superior storage life Highly adhesive to metal Specifications: Base Materials: Bentone / Lube Oils Service Rating: 0°F to 550°F, -18°C to 288°C TDS SDS
Sale!
25816 – Jet-Lube Jacking System Grease Ecf 44 lb Pail
Original price was: $558.70.Current price is: $502.83.
Jacking System Grease - Environmental Formula JET-LUBE JACKING SYSTEM GREASE ECF 5 gal pail is safe to use in offshore applications as it's metal-free and formulated to conform to the strict North Sea Environmental Guidelines. Jacking System Grease™ ECF™ utilizes a water-resistant, calcium thickener that is enhanced to improve adhesion and provide greater protection against water wash-off, wear and corrosion. Benefits of using Jacking System Grease™ ECF™ Excellent environmental properties High load resistant Water & corrosion resistant Non-metallic Safe for offshore personnel Biodegradable, non-bioaccumulate Outstanding film strength Easy to apply Specifications: Base Materials: Calcium Sulfonate Certifications: Environmental Rating: UK CEFAS OCNS Group D, Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C TDS SDS
Sale!
25829 – Jet-Lube Jacking System Grease Ecf 440 lb Drum – Lined
Original price was: $5,534.54.Current price is: $4,981.09.
Jacking System Grease - Environmental Formula JET-LUBE JACKING SYSTEM GREASE ECF is safe to use in offshore applications as it's metal-free and formulated to conform to the strict North Sea Environmental Guidelines. Jacking System Grease™ ECF™ utilizes a water-resistant, calcium thickener that is enhanced to improve adhesion and provide greater protection against water washoff, wear and corrosion. Benefits of using Jacking System Grease™ ECF™ Excellent environmental properties High load resistant Water & corrosion resistant Non-metallic Safe for offshore personnel Biodegradable, non-bioaccumulative Outstanding film strength Easy to apply Specifications of 25829 JACKING SYSTEM GREASE ECF™ Base Materials: Calcium Sulfonate Certifications: Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C TDS SDS
Sale!
26016 – Jet-Lube Og-H 35 lb Pail
Original price was: $409.20.Current price is: $368.28.
Heavy Duty Open Gear Paste Made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Organo Clay / Lube Oils Service Rating: 0°F to 550°F, -18°C to 285°C
Sale!
26019 – Jet-Lube Og-H 35 lb Pail – Metal
Original price was: $437.63.Current price is: $393.87.
Heavy Duty Open Gear Paste Made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Organo Clay / Lube Oils Service Rating: 0°F to 550°F, -18°C to 285°C
Sale!
26024 – Jet-Lube Og-H 120 lb Keg
Original price was: $1,051.84.Current price is: $946.66.
Heavy Duty Open Gear Paste Jet-Lube OG-H™ is made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications of 26024 JET-LUBE OG-H OPEN GEAR LUBRICANT 15 gal drum Base Materials: Organo Clay / Lube Oils Service Rating: 0°F to 550°F, -18°C to 285°C TDS SDS
Sale!
26029 – Jet-Lube Og-H 400 lb Drum
Original price was: $3,494.82.Current price is: $3,145.34.
Heavy Duty Open Gear Paste OG-H 400 LB. 50 GAL. DRUM is made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Calcium Sulfonate Certifications: Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C
Sale!
26050 – Jet-Lube Og-H 14 oz Cartridge
Price range: $13.68 through $410.40
Heavy Duty Open Gear Paste OG-H 14 OZ. CARTRIDGE is made of highly refined mineral oils, a non-soap thickener, low friction molybdenum disulfide (MoS2) and graphite, rust and corrosion inhibitors, and extreme pressure additives. OG-H has excellent stay put qualities, will not melt or throw off, and is ideal for use at high temperatures where other lubricants become runny or drip off. Being relatively temperature insensitive, OG-H can be used at low temperatures without chipping off or channeling and is completely waterproof. Ideal bearings - sleeve. Ideal gears - edger roller, shovel, ring and bull. Benefits of using OG-H™ Low friction moly Excellent "stay put" qualities Very tacky with high adhesive Easy to apply Highly tenacious Lowers operating temperatures Will not melt off or pound off Specifications: Base Materials: Calcium Sulfonate Certifications: Conforms to the strict North Sea Environmental Guidelines, EPA 1311-TCLP, Eco-Certified Service Rating: -4°F to 300°F, -20°C to 149°C TDS SDS
Sale!
2605511 – Jet-Lube Moly Petrolatum 400 lb Drum
Original price was: $3,430.27.Current price is: $3,087.24.
Aircraft Spark Plug Anti-Seize & Thread Lubricant Manufactured to conform to the requirements of Military Specification MIL-T-83483B. MOLY PETROLATUM's intended use is to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 800°F. It's the ideal anti-seize thread compound where parts are engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces below 800°F. Since this compound contains MoS2 which at higher temperature conditions (1000°F and above) may induce corrosion of fastener or contiguous materials. Accordingly, its use at higher temperatures should be avoided. For high temperature applications, NIKAL NUCLEAR should be utilized. Benefits Lead-free Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Lowers friction, reduces wrench torque Specifications: Base Materials: Wax / Mineral Oils Friction / Nut-Factor: (Nut-Factor) - High Chrome Alloys @ 60,000 PSI Contact Stress Certifications: Meets MIL-PRF-83483C (USAF), National Stock Number 8030-00-087-8630 Service Rating: -65°F to 800°F, -54°C to 427°C TDS SDS
Sale!
26203 – Jet-Lube Moly Petrolatum 1 lb Brushtop Can
Price range: $113.00 through $1,355.94
Aircraft Spark Plug Anti-Seize & Thread Lubricant Manufactured to conform to the requirements of Military Specification MIL-T-83483B. MOLY PETROLATUM's intended use is to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 800°F. It's the ideal anti-seize thread compound where parts are engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces below 800°F. Benefits of using Moly Petrolatum Lead-free Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Specifications: Base Materials: Wax / Mineral Oils Certifications: MIL-83483E, National Stock Number 8030-00-087-8630 Service Rating: -65°F to 800°F, -54°C to 427°C
Sale!
26223 – Jet-Lube Moly Petrolatum 10 lb pail
Original price was: $1,286.77.Current price is: $1,158.09.
Aircraft Spark Plug Anti-Seize & Thread Lubricant Manufactured to conform to the requirements of Military Specification MIL-T-83483B. MOLY PETROLATUM's intended use is to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 800°F. It's the ideal anti-seize thread compound where parts are engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces below 800°F. Since this compound contains MoS2 which at higher temperature conditions (1000°F and above) may induce corrosion of fastener or contiguous materials. Accordingly, its use at higher temperatures should be avoided. For high temperature applications, NIKAL NUCLEAR should be utilized. Benefits Lead-free Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Lowers friction, reduces wrench torque Specifications: Base Materials: Wax / Mineral Oils Friction / Nut-Factor: (Nut-Factor) - High Chrome Alloys @ 60,000 PSI Contact Stress Certifications: Meets MIL-PRF-83483C (USAF), National Stock Number 8030-00-087-8630 Service Rating: -65°F to 800°F, -54°C to 427°C TDS SDS
Sale!
26255 – Jet-Lube Moly Petrolatum 1/4 lb Brush Top
Price range: $40.35 through $968.46
Aircraft Spark Plug Anti-Seize & Thread Lubricant Manufactured to conform to the requirements of Military Specification MIL-T-83483B. MOLY PETROLATUM's intended use is to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 800°F. It's the ideal anti-seize thread compound where parts are engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces below 800°F. Since this compound contains MoS2 which at higher temperature conditions (1000°F and above) may induce corrosion of fastener or contiguous materials. Accordingly, its use at higher temperatures should be avoided. For high temperature applications, NIKAL NUCLEAR should be utilized. Benefits Lead-free Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Lowers friction, reduces wrench torque Specifications: Base Materials: Wax / Mineral Oils Friction / Nut-Factor: (Nut-Factor) - High Chrome Alloys @ 60,000 PSI Contact Stress Certifications: Meets MIL-PRF-83483C (USAF), National Stock Number 8030-00-087-8630 Service Rating: -65°F to 800°F, -54°C to 427°C TDS SDS
Sale!
27002 – Jet-Lube Zinc Dust Petrolatum 1/2 lb Brushtop Can
Price range: $23.99 through $287.93
Anti-Seize & Thread Lubricant Provides corrosion protection to metal surfaces. ZINC DUST PETROLATUM lowers friction and reduces wrench torque. It is ideally used to prevent seizing during assembly or disassembly of threaded or unthreaded components fabricated from aluminum or its alloys, engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces. Benefits Prevents galvanic corrosion Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Lowers friction, reduces wrench torque Specifications Base Materials: Wax / Mineral Oils Friction / Nut-Factor: (Nut-Factor) 0.13 Certifications: CID A-A-59313 (formerly MIL-T-22361) Service Rating: -65°F to 788°F, -54°C to 420°C TDS SDS
Sale!
27003 – Jet-Lube Zinc Dust Petrolatum 1 lb Brushtop Can
Price range: $37.63 through $451.55
Anti-Seize & Thread Lubricant Provides corrosion protection to metal surfaces. ZINC DUST PETROLATUM lowers friction and reduces wrench torque. It is ideally used to prevent seizing during assembly or disassembly of threaded or unthreaded components fabricated from aluminum or its alloys, engaged with components fabricated from similar or dissimilar metals. It is also intended to provide corrosion protection to the metal surfaces. Benefits Prevents galvanic corrosion Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Lowers friction, reduces wrench torque Specifications Base Materials: Wax / Mineral Oils Friction / Nut-Factor: (Nut-Factor) 0.13 Certifications: CID A-A-59313 (formerly MIL-T-22361) Service Rating: -65°F to 788°F, -54°C to 420°C TDS SDS
Sale!
27202 – Jet-Lube Graphite Petrolatum 1/2 lb Brush Top
Price range: $13.82 through $165.82
Anti-Seize GRAPHITE PETROLATUM is intended to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 900°F (482°C). This product contains graphite, which may promote corrosion of aluminum, ferrous, magnesium, zinc or cadmium alloys or plated surfaces and should not be used in contact with these metals where galvanic corrosion conditions exist.GRAPHITE PETROLATUM must not come in contact with spark plug terminals or electrodes. Due to the high evaporation rate of the petrolatum constituent, this compound is not suitable for use on the threaded or unthreaded components of such equipment as optical instruments where the vapors may adversely affect associated components, e.g., lenses, prisms and other optical elements. Benefits: Lowers friction Reduces wrench torque Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Specifications: Base Materials: Wax / Mineral OilsFriction / Nut-Factor: (Nut-Factor) - 0.13 - Carbon Steel Alloy @ 60,000 PSI Contact StressCertifications: SAE-AMS-2518 (formerly MIL-T-5544C), NATO Stock Number 9150-99-910-0528 (500 g can), National Stock Number 8030-01-044-5034 (1 lb. can)Service Rating: -65°F to 900°F, -54°C to 482°C TDSSDS
Sale!
27203 – Jet-Lube Graphite Petrolatum 1 lb Brushtop Can
Price range: $30.08 through $360.94
Anti-Seize GRAPHITE PETRO 500 GM. PLUG TOP CAN is intended to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 900F (482C). This product contains graphite, which may promote corrosion of aluminum, ferrous, magnesium, zinc or cadmium alloys or plated surfaces and should not be used in contact with these metals where galvanic corrosion conditions exist. Benefits of using Graphite Petrolatum Lowers friction Reduces wrench torque Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Specifications: Base Materials: Wax / Mineral Oils Friction / K-Factor: 0.13 Certifications: SAE-AMS-2518, MIL-T-5544C, NATO Stock Number 9150-99-910-0528 (500 g can), National Stock Number 8030-01-044-5034 (1 lb. can), OSPAR Compliant, Registered by CEFAS in the UK and KPD/SFT in Norway Order under NATO stock number, Eco-Compliant Service Rating: -65°F to 900°F, -54°C to 482°C TDS SDS
Sale!
27223 – Jet-Lube Graphite Petrolatum 10 lb pail
Original price was: $511.47.Current price is: $460.32.
Anti-Seize GRAPHITE PETROLATUM is intended to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 900°F (482°C). This product contains graphite, which may promote corrosion of aluminum, ferrous, magnesium, zinc or cadmium alloys or plated surfaces and should not be used in contact with these metals where galvanic corrosion conditions exist.GRAPHITE PETROLATUM must not come in contact with spark plug terminals or electrodes. Due to the high evaporation rate of the petrolatum constituent, this compound is not suitable for use on the threaded or unthreaded components of such equipment as optical instruments where the vapors may adversely affect associated components, e.g., lenses, prisms and other optical elements. Benefits: Lowers friction Reduces wrench torque Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Specifications: Base Materials: Wax / Mineral OilsFriction / Nut-Factor: (Nut-Factor) - 0.13 - Carbon Steel Alloy @ 60,000 PSI Contact StressCertifications: SAE-AMS-2518 (formerly MIL-T-5544C), NATO Stock Number 9150-99-910-0528 (500 g can), National Stock Number 8030-01-044-5034 (1 lb. can)Service Rating: -65°F to 900°F, -54°C to 482°C TDSSDS
Sale!
27255 – Jet-Lube Graphite Petrolatum 1/4 lb Brush Top
Price range: $30.18 through $724.38
Anti-Seize GRAPHITE PETROLATUM is intended to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 900°F (482°C). This product contains graphite, which may promote corrosion of aluminum, ferrous, magnesium, zinc or cadmium alloys or plated surfaces and should not be used in contact with these metals where galvanic corrosion conditions exist.GRAPHITE PETROLATUM must not come in contact with spark plug terminals or electrodes. Due to the high evaporation rate of the petrolatum constituent, this compound is not suitable for use on the threaded or unthreaded components of such equipment as optical instruments where the vapors may adversely affect associated components, e.g., lenses, prisms and other optical elements. Benefits: Lowers friction Reduces wrench torque Permits reuse of fittings, saves stud, bolt & nut replacement Water-resistant Specifications: Base Materials: Wax / Mineral OilsFriction / Nut-Factor: (Nut-Factor) - 0.13 - Carbon Steel Alloy @ 60,000 PSI Contact StressCertifications: SAE-AMS-2518 (formerly MIL-T-5544C), NATO Stock Number 9150-99-910-0528 (500 g can), National Stock Number 8030-01-044-5034 (1 lb. can)Service Rating: -65°F to 900°F, -54°C to 482°C TDSSDS
Sale!
27528 – Jet-Lube 769 Lubricant 350 lb Drum
Original price was: $3,879.92.Current price is: $3,491.93.
Lubricant & Penetrant - NSF H2 769 LUBRICANT® 50 GAL. TITE HEAD DRUM is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications: Base Materials: Clear Amber Fluid Certifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I
Sale!
27533 – Jet-Lube 769 Lubricant 1 gal Jug
Price range: $87.36 through $349.45
Lubricant & Penetrant - NSF H2 769 LUBRICANT® 1 GAL. JUG is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications: Base Materials: Clear Amber Fluid Certifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I
Sale!
27535 – Jet-Lube 769 Lubricant 34 lb Pail
Original price was: $406.40.Current price is: $365.76.
Lubricant & Penetrant - NSF H2 769 LUBRICANT® 5 GAL. DRUM is the leading multipurpose, penetrating, lubricating, moisture displacing and corrosion preventative product for use where salt water, salt spray or other harsh environments are present. 769 Lubricant gives total performance while being environmentally safe, easy to use and non-flammable. Lubricates: Contains ashless extreme pressure additives and highly refined lubricating oils that provide superior lubricating protection and antiwear properties. Penetrates: Rusted and frozen metal parts studs, nuts, screws, pins, linkages are easily loosened by means of superior creepability. Removes Moisture: Moisture is lifted and displaced rather than trapped. Pores and crevices of surfaces are freed from moisture and are coated with a thin non-greasy film that prevents additional moisture from clinging or entering. Prevents Rust & Corrosion: Thin film adheres to metallic surfaces, providing positive, temporary protection against the formation of rust and corrosion, including electrolytic and galvanic corrosion common in salt environments. Benefits of using 769 Lubricant® Non-flammable Multipurpose Non-evaporating Contains no fluorocarbons Never hardens or dries out Contains no silicones Specifications: Base Materials: Clear Amber Fluid Certifications: NSF H2 Registered #137551 (Bulk), #137644 (Aerosol), MIL-PRF-81309H (Aerosol) Type II & III, Class II, CO2 Grade MIL-PRF-81309H (Bulk) Type II & III, Class I MIL-C-16173E Grade 3 MIL-C-23411A VV-P-216B CID A-A-50493C Class B Type I TDS SDS (Aerosol) SDS
27911 – Jet-Lube NCS-30 Arctic 22 lb Pail
$151.65
What is Jet-Lube NCS-30 Arctic? NCS-30 ARCTIC is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. Two service ratings, and the application decides which one applies. Jet-Lube rates NCS-30 Arctic separately by use:Oilfield/Mining/Construction Drilling: -40°F to 350°FIndustrial Anti-seize Applications: -65°F to 2600°FThose are two services of one product, not two grades of it, so the wider figure does not describe the narrower service. Tell us the application and we will confirm which rating applies. Which pack is part 27911? Part 27911 is the 22 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 5 packs of Jet-Lube NCS-30 Arctic for the United States. Part numberPack279231 GAL Pail - 11 LB279112 GAL Pail - 22 LB279155 GAL Pail - 44 LB279175 GAL Pail (Metal) - 50 LB2792950-55 GAL Drum - 550 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits Excellent performance on high-chrome or nickel alloysContains no metalsExtreme-pressure additives provide additional protection against seizing & gallingNon-conductive for MWD applicationsProvides maximum protection on Wedge Thread* drill string connection designsHigh frictional properties ideal for casing drilling applicationsPumpability makes it ideal for HDD and other construction drilling applications Specifications Base Materials Calcium Complex / PetroleumFriction / Nut-Factor 1.15 (drill strings) (relative to API RP 5A3 Annex I)Certifications NSF-61 Certified Conforms with API RP 5A3 for use with rotary shouldered connectionsService Rating Oilfield/Mining/Construction Drilling / -40°F to 350°F (-40°C to 177°C) Industrial Anti-seize Applications / -65°F to 2600°F (-54°C to 1427°C) Specifications as published by Jet-Lube for NCS-30 Arctic. Frequently asked questions What does part number 27911 come in? 27911 is the 22 lb Pail, and the price on this page is the price of that pack. Is 27911 sold in other sizes? The same product is numbered 27923, 27915, 27917, 27929 in its other packs. Ask us for any of them. How do I order this part? Order part 27911 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock.
Sale!
27915 – Jet-Lube Ncs-30 Arctic 44 lb Pail
Original price was: $495.79.Current price is: $446.21.
Nonmetallic Thread Compound Jet-Lube NCS-30 Arctic is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. NCS-30 ARCTIC offers the same protection as regular NCS-30, but at lower service temperatures. Especially effective pump or spray application services. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 Arctic® Excellent performance on high-chrome or nickel alloys Contains no metals Extreme-pressure additives provide additional protection against seizing & galling Non-conductive for MWD applications Provides maximum protection on Wedge Thread* drill string connection designs High frictional properties ideal for casing drilling applications Pumpability makes it ideal for HDD and other construction drilling applications Specifications of 27915 Jet-Lube NCS-30 Arctic 20KG/44LB Base Materials: Calcium Complex / Petroleum Friction / K-Factor: 1.15 drill strings (Relative to API RP 7G), 1.40 (Relative to API RP 5A3) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -40°F to 350°F, -40°C to 177°CC TDS SDS
Sale!
27915L – Jet-Lube Ncs-30 Arctic 44 lb Pail – Lined
Original price was: $508.54.Current price is: $457.69.
Nonmetallic Thread Compound NCS-30 ARCTIC is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. NCS-30 ARCTIC offers the same protection as regular NCS-30, but at lower service temperatures. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits: Excellent performance on high-chrome or nickel alloys Contains no metals Extreme-pressure additives provide additional protection against seizing & galling Non-conductive for MWD applications Provides maximum protection on Wedge Thread* drill string connection designs High frictional properties ideal for casing drilling applications Pumpability makes it ideal for HDD and other construction drilling applications Specifications: Base Materials: Calcium Complex / Petroleum Friction / Nut-Factor: 1.15 drill strings (Relative to API RP 7G), 1.40 (Relative to API RP 5A3) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -40°F to 350°F, -40°C to 177°CC
Sale!
27917 – Jet-Lube NCS-30 Arctic 50 lb Pail Metal
Original price was: $566.61.Current price is: $509.95.
Nonmetallic Thread Compound NCS-30 ARCTIC is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. NCS-30 ARCTIC offers the same protection as regular NCS-30, but at lower service temperatures. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits: Excellent performance on high-chrome or nickel alloys Contains no metals Extreme-pressure additives provide additional protection against seizing & galling Non-conductive for MWD applications Provides maximum protection on Wedge Thread* drill string connection designs High frictional properties ideal for casing drilling applications Pumpability makes it ideal for HDD and other construction drilling applications Specifications: Base Materials: Calcium Complex / Petroleum Friction / Nut-Factor: 1.15 drill strings (Relative to API RP 7G), 1.40 (Relative to API RP 5A3) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -40°F to 350°F, -40°C to 177°CC
27923 – Jet-Lube NCS-30 Arctic 11 lb Pail
$120.72
What is Jet-Lube NCS-30 Arctic? NCS-30 ARCTIC is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. Two service ratings, and the application decides which one applies. Jet-Lube rates NCS-30 Arctic separately by use:Oilfield/Mining/Construction Drilling: -40°F to 350°FIndustrial Anti-seize Applications: -65°F to 2600°FThose are two services of one product, not two grades of it, so the wider figure does not describe the narrower service. Tell us the application and we will confirm which rating applies. Which pack is part 27923? Part 27923 is the 11 lb Pail. The part number changes with the pack, not with the product: Jet-Lube numbers 5 packs of Jet-Lube NCS-30 Arctic for the United States. Part numberPack279231 GAL Pail - 11 LB279112 GAL Pail - 22 LB279155 GAL Pail - 44 LB279175 GAL Pail (Metal) - 50 LB2792950-55 GAL Drum - 550 LB Anyone holding a container with only a number on it can read the pack off that table. Benefits Excellent performance on high-chrome or nickel alloysContains no metalsExtreme-pressure additives provide additional protection against seizing & gallingNon-conductive for MWD applicationsProvides maximum protection on Wedge Thread* drill string connection designsHigh frictional properties ideal for casing drilling applicationsPumpability makes it ideal for HDD and other construction drilling applications Specifications Base Materials Calcium Complex / PetroleumFriction / Nut-Factor 1.15 (drill strings) (relative to API RP 5A3 Annex I)Certifications NSF-61 Certified Conforms with API RP 5A3 for use with rotary shouldered connectionsService Rating Oilfield/Mining/Construction Drilling / -40°F to 350°F (-40°C to 177°C) Industrial Anti-seize Applications / -65°F to 2600°F (-54°C to 1427°C) Specifications as published by Jet-Lube for NCS-30 Arctic. Frequently asked questions What does part number 27923 come in? 27923 is the 11 lb Pail, and the price on this page is the price of that pack. Is 27923 sold in other sizes? The same product is numbered 27911, 27915, 27917, 27929 in its other packs. Ask us for any of them. How do I order this part? Order part 27923 on this page, or contact PE Energy for quantity pricing, freight on the larger packs, and stock.
Sale!
27924 – NCS-30 ARCTIC
Original price was: $1,055.73.Current price is: $950.15.
Nonmetallic Thread Compound Jet-Lube NCS-30 Arctic is a premium quality, nonmetallic, non-conductive compound containing natural extreme pressure and anti-wear additives. These are blended into JET-LUBE's all-weather calcium complex base grease. This base grease offers the additional advantage of low temperature application and service, superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. NCS-30 ARCTIC offers the same protection as regular NCS-30, but at lower service temperatures. Especially effective pump or spray application services. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30 Arctic® Excellent performance on high-chrome or nickel alloys Contains no metals Extreme-pressure additives provide additional protection against seizing & galling Non-conductive for MWD applications Provides maximum protection on Wedge Thread* drill string connection designs High frictional properties ideal for casing drilling applications Pumpability makes it ideal for HDD and other construction drilling applications Specifications of 27924 Jet-Lube NCS-30 Arctic Base Materials: Calcium Complex / Petroleum Friction / K-Factor: 1.15 drill strings (Relative to API RP 7G), 1.40 (Relative to API RP 5A3) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -40°F to 350°F, -40°C to 177°CC TDS SDS

←
1
2
3
4
5
6
7
8
…
12
13
14
→

Categories

Adhesives
Aids to Navigation
Cleaning and Degreasing
Compressed Air Treatment
Condition Monitoring
Dope Brushes
Emergency Supplies
Engine Parts
Equipment
Filters
Filtration
Firefighting Equipment
Gas and Flame Detection Systems
Heavy Machinery
Hoisting and Lifting Equipment
Lubricants
Maintenance and Repair
Medical Equipment
Oil Transfer Equipment
Paramedic Supplies
Power Tools
Pump
Safety
Storage and Handling
Sullair Air Compressors
Thread Compounds & Specialty Lubricants
Tools
Valves & Accessories
Ventilation
Visual Oil Analysis

Brands

About Us

PE Energy is an industry-leading, one-stop-shop offering high-quality parts and equipment at an incredible value. Don't hesitate to contact us for information about current offers and bulk prices!

Contact us: pesales@pe-energy.com

Follow Us

Facebook
LinkedIn
Twitter
YouTube

Our Network

PE Energy – México PE Energy – Colombia IndustrialStop

Blog
Careers
Privacy Policy
Terms Of Use
Contact Us
Sitemap

© 2026 PE Energy. All Rights Reserved.

Products search