Des-Case
Showing 91–135 of 387 results
-
Des-Case DC-EXA-10 Breather Adapter
$12.931€³ MNPT Threaded Steel Adapter for Extended Series Breathers Equipment Connection / Port Size: 1€³ MNPT Male -
Des-Case DC-EXA-17 Breather Adapter
$12.933/4€³ MNPT Threaded Steel Adapter for Extended Series Breathers Equipment Connection / Port Size: 3/4€³ MNPT Male -
Des-Case DC-EXVA-12M Breather Adapter
$113.773/4€³ MNPT Steel Vent Valve Adapter for Extended Series Breathers Equipment Connection / Port Size: 3/4€³ MNPT Male -
Des-Case DC-EXVA-16M Breather Adapter
$113.771€³ MNPT Steel Vent Valve Adapter for Extended Series Breathers Equipment Connection / Port Size: 1€³ MNPT Male -
Des-Case DC-HG-1 Desiccant Breather
Price range: $98.58 through $591.51HydroGuard Breathers Des-Case HydroGuard breathers uniquely feature an expansion chamber and internal check valves that create a nearly-sealed system. Designed specifically for steady-state operations with minimal temperature fluctuations, these breathers provide excellent protection in continuous duty applications. Features By the Numbers 1–Domed Cap A domed cap allows for better washdown runoff. 2–Expansion Chamber The diaphragm allows for expansion/contraction of the air within the casing as a result of temperature variations during steady-state operations. 3–External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4–Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 5–Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 6–Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 7–Larger, High-Capacity Check Valves High-capacity check valves allow for increased airflow at low cracking pressure. 8-Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 9–Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 7.19 in (182 mm)Unit Diameter: 2.52 in (64 mm)Filter Efficiency: 3μ absolute (β3≥200)Amount of Silica Gel: 0.3 lbs (0.1 kg)Adsorption Capacity: 2 fl oz (50 ml)Max. Flow Rate: 1 cfm (40 lpm)Operating Temp. Range: -20°F to 200°F (-29°C to 93°C)Connection Size: 3/8″ Multi-Fit (NPT, BSPP, BSPT)Suction/Return Rate at 1 psid: 11 gpm (40 lpm)Gearbox/Storage Tank Max. Volume: 50 gal (189 L)Hydraulic Reservoir Max. Volume: N/A TDS -
Des-Case DC-HG-8 Desiccant Breather
Price range: $147.91 through $887.45HydroGuard Breathers Des-Case HydroGuard breathers uniquely feature an expansion chamber and internal check valves that create a nearly-sealed system. Designed specifically for steady-state operations with minimal temperature fluctuations, these breathers provide excellent protection in continuous duty applications. Features By the Numbers 1–Domed Cap A domed cap allows for better washdown runoff. 2–Expansion Chamber The diaphragm allows for expansion/contraction of the air within the casing as a result of temperature variations during steady-state operations. 3–External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4–Integrated Nylon Standpipe The integrated standpipe provides excellent vibration resistance and dissipates impact throughout the unit, eliminating weak points. It also allows even airflow distribution throughout the unit, eliminating inaccurate readings of desiccant saturation. 5–Integrated Drip Ring An integrated drip ring keeps shedding water from entering the vent holes. 6–Threaded Mounting Easily replaces standard filler/breather cap with multi-fit connection or one of several adapters. 7–Larger, High-Capacity Check Valves High-capacity check valves allow for increased airflow at low cracking pressure. 8-Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 9–Enhanced Seal An enhanced seal eliminates potential for airflow bypass. Specifications Unit Height: 9.73 in (247 mm) Unit Diameter: 4.10 in (104 mm) Filter Efficiency: 3μ absolute (β3≥200) Amount of Silica Gel: 0.8 lbs (0.4 kg) Adsorption Capacity: 5 fl oz (144 ml) Max. Flow Rate: 7 cfm (198 lpm) Operating Temp. Range: -20°F to 200°F (-29°C to 93°C) Connection Size: 1″ Multi-Fit (NPT, BSPP, BSPT) Suction/Return Rate at 1 psid: 52 gpm (198 lpm) Gearbox/Storage Tank Max. Volume: 400 gal (1514 L) Hydraulic Reservoir Max. Volume: 55 gal (208 L) TDS -
Des-Case DC-IL-EX-4 Desiccant Breather
$329.72Connected Breathers Take a proactive approach to water ingression with the market’s first connected and most accurate breather. Unlike any other breather on the market, our connected breathers eliminate the subjectivity of color-changing desiccant media. Our patent pending IsoLogic® Sensor Technology provides a precise measurement of your breather’s life to eliminate replacing a breather too late or too soon. Shorten time-consuming, scheduled lube routes by collecting data on multiple breathers at the same time. Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment. View all breather statuses and trend data on the web platform from anywhere, anytime. All you need is the internet. Features By the Numbers 1. Sensors Measures critical values to calculate the remaining breather life, temperature and saturation direction. 2. Detachable Module Calculates the remaining breather life, temperature and saturation direction and stores breather data. 3. Threaded Mounting Internal threads provide durability and stability and can be used with one of several adapters. 4. Recessed Check-Valves High-quality umbrella check-valves that won’t clog or stick are recessed underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions, prolonging breather life. 5. Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 6. Resilient Polycarbonate Body Shock-absorbing, clear casing provides reliable service and easy maintenance. 7. Water Adsorbent Silica gel adsorbs water from incoming air and can hold up to 40% of its weight. 8. Secondary Filter Element Second polyester filter element protects against migration of desiccant dust, providing maximum efficiency. 9. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. Specifications Unit Height (in / mm): 10.0 / 253.1 Unit Diameter (in / mm): 5.7 / 143.9 Connection Size: 1″ Female (FNPT) Amount of Silica Gel (lbs / kg): 4.2 / 1.91 Adsorption Capacity (fl oz / ml): 27.0 / 798 Max. Flow Rate (cfm): 24 @ 1psid Max. Flow Rate (lpm): 680 Filter Efficiency: 3µ absolute (ß₃≥200) Operating Temp. Range (°F): -4˚ to 130˚ Operating Temp. Range (°C): -20° to 54° Breather Sizing Max. Airflow at 1 psid (gpm/lpm): 180 / 680 Gearbox/Storage Tank Max.Volume (gal/L): 1000 / 3785 Hydraulic Reservoir Max. Volume(gal/L): 400 / 1514 Wireless Module Specs Casing: Polycarbonate, Steel (ball plunger) Cap: Thermoplastic elastomers (TPE), Steel (screws) Circuit Board: LED lights, FR4 Fiberglass Batteries: 1.5V alkaline AAA (Manganese Dioxide, Zinc, Potassium Hydroxide, Graphite) TDS -
Des-Case DC-IL-EX-4-R Desiccant Breather Cartridge – Case of 6
$1,805.61Connected Breather Replacement Cartridges Replacement Cartridges for models DC-IL-EX-4 & DC-IL-M8-EX-4 -
Des-Case DC-IL-M8-EX-4 Desiccant Breather
$329.72Connected Breathers Take a proactive approach to water ingression with the market’s first connected and most accurate breather. Unlike any other breather on the market, our connected breathers eliminate the subjectivity of color-changing desiccant media. Our patent pending IsoLogic® Sensor Technology provides a precise measurement of your breather’s life to eliminate replacing a breather too late or too soon. Shorten time-consuming, scheduled lube routes by collecting data on multiple breathers at the same time. Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment. View all breather statuses and trend data on the web platform from anywhere, anytime. All you need is the internet. Features By the Numbers 1. Sensors Measures critical values to calculate the remaining breather life, temperature and saturation direction. 2. Detachable Module Calculates the remaining breather life, temperature and saturation direction and stores breather data. 3. Threaded Mounting Internal threads provide durability and stability and can be used with one of several adapters. 4. Recessed Check-Valves High-quality umbrella check-valves that won’t clog or stick are recessed underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions, prolonging breather life. 5. Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 6. Resilient Polycarbonate Body Shock-absorbing, clear casing provides reliable service and easy maintenance. 7. Water Adsorbent Silica gel adsorbs water from incoming air and can hold up to 40% of its weight. 8. Secondary Filter Element Second polyester filter element protects against migration of desiccant dust, providing maximum efficiency. 9. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. Specifications Unit Height (in / mm): 10.0 / 253.1 Unit Diameter (in / mm): 5.7 / 143.9 Connection Size: 1″ Female (FNPT) Amount of Silica Gel (lbs / kg): 4.2 / 1.91 Adsorption Capacity (fl oz / ml): 27.0 / 798 Max. Flow Rate (cfm): 24 @ 1psid Max. Flow Rate (lpm): 680 Filter Efficiency: 3µ absolute (ß₃≥200) Operating Temp. Range (°F): -4˚ to 130˚ Operating Temp. Range (°C): -20° to 54° Breather Sizing Max. Airflow at 1 psid (gpm/lpm): 180 / 680 Gearbox/Storage Tank Max.Volume (gal/L): 1000 / 3785 Hydraulic Reservoir Max. Volume(gal/L): 400 / 1514 Wired Module Specs Casing: Polycarbonate, Steel (ball plunger) Cap: Thermoplastic elastomers (TPE), Steel (screws) Circuit Board: LED lights, FR4 Fiberglass M8 Connector: Polyamide 67 GF30, Silicone and Nickel Plated Copper Alloy TDS -
Des-Case DC-IL-M8-VG-4 Desiccant Breather
$239.05Connected Breathers Take a proactive approach to water ingression with the market’s first connected and most accurate breather. Unlike any other breather on the market, our connected breathers eliminate the subjectivity of color-changing desiccant media. Our patent pending IsoLogic® Sensor Technology provides a precise measurement of your breather’s life to eliminate replacing a breather too late or too soon. Shorten time-consuming, scheduled lube routes by collecting data on multiple breathers at the same time. Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment. View all breather statuses and trend data on the web platform from anywhere, anytime. All you need is the internet. Features By the Numbers 1. Sensors Measures critical values to calculate the remaining breather life, temperature and saturation direction. 2. Detachable Module Calculates the remaining breather life, temperature and saturation direction and stores breather data. 3. Threaded Mounting Internal threads provide durability and stability and can be used with one of several adapters. 4. Recessed Check-Valves High-quality umbrella check-valves that won’t clog or stick are recessed underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions, prolonging breather life. 5. Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 6. Resilient Polycarbonate Body Shock-absorbing, clear casing provides reliable service and easy maintenance. 7. Water Adsorbent Silica gel adsorbs water from incoming air and can hold up to 40% of its weight. 8. Secondary Filter Element Second polyester filter element protects against migration of desiccant dust, providing maximum efficiency. 9. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. Specifications Unit Height (in / mm): 10.0 / 253.9 Unit Diameter (in / mm): 4.1 / 104.1 Connection Size: 1″ Multi-Fit (NPT, BSPT, NPSM) Amount of Silica Gel (lbs / kg): 1.88 / 0.85 Adsorption Capacity (fl oz / ml): 11.3 / 353 Max. Flow Rate (cfm): 2.98 @ 1 psid Max. Flow Rate (lpm): 283 Filter Efficiency: 3µ absolute (β₃≥200) Operating Temp. Range (°F): -4˚ to 130˚ Operating Temp. Range (°C): -20° to 54° Breather Sizing Max. Airflow at 1 psid (gpm/lpm): 19 / 85 Gearbox/Storage Tank Max.Volume (gal/L): 500 / 1893 Hydraulic Reservoir Max. Volume(gal/L): 200 / 757 Wired Module Specs Casing: Polycarbonate, Steel (ball plunger) Cap: Thermoplastic elastomers (TPE), Steel (screws) Circuit Board: LED lights, FR4 Fiberglass M8 Connector: Polyamide 67 GF30, Silicone and Nickel Plated Copper Alloy TDS -
Des-Case DC-IL-VG-1 Desiccant Breather
$142.94Connected Breathers Take a proactive approach to water ingression with the market’s first connected and most accurate breather. Unlike any other breather on the market, our connected breathers eliminate the subjectivity of color-changing desiccant media. Our patent pending IsoLogic® Sensor Technology provides a precise measurement of your breather’s life to eliminate replacing a breather too late or too soon. Shorten time-consuming, scheduled lube routes by collecting data on multiple breathers at the same time. Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment. View all breather statuses and trend data on the web platform from anywhere, anytime. All you need is the internet. Features By the Numbers 1. Sensors Measures critical values to calculate the remaining breather life, temperature and saturation direction. 2. Detachable Module Calculates the remaining breather life, temperature and saturation direction and stores breather data. 3. Threaded Mounting Internal threads provide durability and stability and can be used with one of several adapters. 4. Recessed Check-Valves High-quality umbrella check-valves that won’t clog or stick are recessed underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions, prolonging breather life. 5. Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 6. Resilient Polycarbonate Body Shock-absorbing, clear casing provides reliable service and easy maintenance. 7. Water Adsorbent Silica gel adsorbs water from incoming air and can hold up to 40% of its weight. 8. Secondary Filter Element Second polyester filter element protects against migration of desiccant dust, providing maximum efficiency. 9. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. Specifications Unit Height (in / mm): 5.3 / 135.1 Unit Diameter (in / mm): 2.5 / 63.9 Connection Size: 3/8″ Multi-Fit (NPT, BSPP, BSPT) Amount of Silica Gel (lbs / kg): 0.28 / 0.127 Adsorption Capacity (fl oz / ml): 1.68 / 50 Max. Flow Rate (cfm): 1.45 @ 1 psid Max. Flow Rate (lpm): 41 Filter Efficiency: 3µ absolute (β₃≥200) Operating Temp. Range (°F): -4˚ to 130˚ Operating Temp. Range (°C): -20° to 54° Breather Sizing Max. Airflow at 1 psid (gpm/lpm): 11 / 41 Gearbox/Storage Tank Max.Volume (gal/L): 35 / 132 Hydraulic Reservoir Max. Volume(gal/L): 5 / 19 Wireless Module Specs Casing: Polycarbonate, Steel (ball plunger) Cap: Thermoplastic elastomers (TPE), Steel (screws) Circuit Board: LED lights, FR4 Fiberglass Batteries: 1.5V alkaline AAA (Manganese Dioxide, Zinc, Potassium Hydroxide, Graphite) TDS -
Des-Case DC-IL-VG-1-R Desiccant Breather Cartridge – Case of 6
$684.93Connected Breather Replacement Cartridges Replacement Cartridges for models DC-IL-VG-1 & DC-IL-M8-VG-1 -
Des-Case DC-IL-VG-4 Desiccant Breather
$239.05Connected Breathers Take a proactive approach to water ingression with the market’s first connected and most accurate breather. Unlike any other breather on the market, our connected breathers eliminate the subjectivity of color-changing desiccant media. Our patent pending IsoLogic® Sensor Technology provides a precise measurement of your breather’s life to eliminate replacing a breather too late or too soon. Shorten time-consuming, scheduled lube routes by collecting data on multiple breathers at the same time. Decrease the risk of workplace injuries by monitoring breathers installed on remote or hard-to-access equipment. View all breather statuses and trend data on the web platform from anywhere, anytime. All you need is the internet. Features By the Numbers 1. Sensors Measures critical values to calculate the remaining breather life, temperature and saturation direction. 2. Detachable Module Calculates the remaining breather life, temperature and saturation direction and stores breather data. 3. Threaded Mounting Internal threads provide durability and stability and can be used with one of several adapters. 4. Recessed Check-Valves High-quality umbrella check-valves that won’t clog or stick are recessed underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions, prolonging breather life. 5. Filter Element Polyester filter element removes airborne contamination to 3-micron absolute. Unique loops allow particles to release during system exhalation, helping to increase breather life. 6. Resilient Polycarbonate Body Shock-absorbing, clear casing provides reliable service and easy maintenance. 7. Water Adsorbent Silica gel adsorbs water from incoming air and can hold up to 40% of its weight. 8. Secondary Filter Element Second polyester filter element protects against migration of desiccant dust, providing maximum efficiency. 9. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. Specifications Unit Height (in / mm): 10.0 / 253.9 Unit Diameter (in / mm): 4.1 / 104.1 Connection Size: 1″ Multi-Fit (NPT, BSPT, NPSM) Amount of Silica Gel (lbs / kg): 1.88 / 0.85 Adsorption Capacity (fl oz / ml): 11.3 / 353 Max. Flow Rate (cfm): 2.98 @ 1 psid Max. Flow Rate (lpm): 283 Filter Efficiency: 3µ absolute (β₃≥200) Operating Temp. Range (°F): -4˚ to 130˚ Operating Temp. Range (°C): -20° to 54° Breather Sizing Max. Airflow at 1 psid (gpm/lpm): 19 / 85 Gearbox/Storage Tank Max.Volume (gal/L): 500 / 1893 Hydraulic Reservoir Max. Volume(gal/L): 200 / 757 Wireless Module Specs Casing: Polycarbonate, Steel (ball plunger) Cap: Thermoplastic elastomers (TPE), Steel (screws) Circuit Board: LED lights, FR4 Fiberglass Batteries: 1.5V alkaline AAA (Manganese Dioxide, Zinc, Potassium Hydroxide, Graphite) TDS -
Des-Case DC-IL-VG-4-R Desiccant Breather Cartridge – Case of 6
$1,261.61Connected Breather Replacement Cartridges Replacement Cartridges for models DC-IL-VG-4 & DC-IL-M8-VG-4 -
Des-Case DC-ND-2 Non-Desiccant Breather
Price range: $29.53 through $177.19Non-Desiccant Breathers Des-Case Non-Desiccant breathers prevent contamination ingress in low humidity environments or in applications where water-based fluids are in use (e.g. water glycol hydraulic fluid). They help to prevent contamination by preventing free water as well as particles down to 1 micron from getting into the reservoir. Features By the Numbers 1. Spin-On Filter Cap A spin-on filter cap provides increased dirt holding capacity and removes airborne contamination to 3-micron absolute. 2. Foam Pad Foam filter captures any oil mist and disperses incoming air evenly over filtration and drying areas. 3. External Ribs External ribs on shell to create greater durability and grip when installing or replacing breather. 4. Splash Guard Glass filled nylon standpipe with incorporated splash guard for increased durability and chemical compatibility, while protecting desiccant from oil mist and splashing. 5. Optional Check Valves High quality check valves that won’t clog or stick are located underneath the unit for added protection from washdown environments. Check-valves isolate equipment from ambient conditions prolonging breather life and protecting system integrity. 6. Threaded Mounting Internal threads provide durability and stability and can be used with one of several adapter options. Specifications Unit Height: 1.4 in (34 mm)Unit Diameter: 1.8 in (46 mm)Filter Efficiency: 0.3μ absolute (β0.3≥1000)Max. Flow Rate: 0.67 cfm (19 lpm)Operating Temp. Range: -40°F to 300°F (-40°C to 149°C)Connection Size: 3/8″Suction/Return Rate at 1 psid: 5 gpm (19 lpm)Gearbox/Storage Tank Max. Volume: 15 gal (57 L)Hydraulic Reservoir Max. Volume: 15 gal (57 L) TDS -
Des-Case DC-OCM-3-T Breather Adapter
$81.63Oil Coalescing Adapters PVC Oil Coalescing Adapter Breather Connection Size: 1" NPT Female Equipment Connection Size: 1" NPT Male -
Des-Case DC-OCM5-VI Breather Adapter
$67.38Oil Coalescing Adapters Nylon Oil Coalescing Adapter with Vacuum Indicator Breather Connection Size: 1" NPT Female Equipment Connection Size: 1" NPT Male -
Des-Case DC-OLI-HVK Oil Level Gauge Indicator
$36.17OLI Headspace Vent Kit The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI-ND2 Oil Level Gauge Indicator
$28.24Non-Desiccant Breather & Coupler, 0.3um filter, oleophobic, hydrophobic The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI12 Oil Level Gauge Indicator
$58.2012″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 12 in / 30.48 cmDiameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI15 Oil Level Gauge Indicator
$134.7115″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 15 in / 38.10 cmDiameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI18 Oil Level Gauge Indicator
$158.4518″ OLI – 1/2″ MNPT X 1/2″ MNPT18"/ 457 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI18 Oil Level Gauge Indicator
$158.4518″ OLI – 1/2″ MNPT X 1/2″ MNPT18"/ 457 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI21 Oil Level Gauge Indicator
$176.8421"/ 533 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI24 Oil Level Gauge Indicator
$201.8724"/ 610 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather *Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting *Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI27 Oil Level Gauge Indicator
$226.9027"/ 686 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI3 Oil Level Gauge Indicator
$41.823″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 3 in / 7.62 cm Diameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather *Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting *Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI30 Oil Level Gauge Indicator
$259.6030"/ 762 mm Oil Level Indicator, 7/8" OD, 1/2" Male NPT on each end The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI6 Oil Level Gauge Indicator
$47.076″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 6 in / 15.24 cm Diameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather *Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting *Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI6 Oil Level Gauge Indicator
$47.076″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 6 in / 15.24 cmDiameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI9 Oil Level Gauge Indicator
$52.949″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 9 in / 22.86 cm Diameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather *Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting *Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OLI9 Oil Level Gauge Indicator
$52.949″ OLI – 1/2″ MNPT X 1/2″ MNPT The Oil Level Indicator (OLI) was developed in response to the need of maintenance professionals to quickly gauge the condition and level of oil inside large tanks, gearboxes and reservoirs. The OLI is a clear high performance polyamide column with 1/2″ NPT threads at each end. Red and green level marker stickers are included with the OLI to mark upper and lower limits, or to designate running oil level and idle oil level. Utilizing the drain port, operators can visually monitor the fluid level within reservoirs. * Stainless steel fittings and breather cap sold separately. Overall Length: 9 in / 22.86 cmDiameter of Acrylic: 0.875 in / 2.223 cm Features: By the Numbers 1. ND-2 Breather*Sold separately 2. Idle/Maximum Oil Level Marker 3. Running/Minimum Oil Level Marker 4. Stainless Steel Fitting*Sold separately Specs Material Transparent Polyamide Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll gear, mineral and synthetic oils Available Options Lengths ranging from 3″ to 15″ Stainless steel fittings 2 micron breather cap (3″ to 12″ models) Custom lengths available upon request Applications: Pumps Gearboxes Storage Tanks Oil Level Gauge Indicator Technical Specs -
Des-Case DC-OSGL-HVK Oil Sight Glass Level Monitor Headspace Vent Kit
$36.17The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Features: By the Numbers 1. ND-2 Breather 2. Level Monitoring Area 3. Idle/Maximum Oil Level Marker 4. Running/Minimum Oil Level Marker 5. 3/8″ NPT Port with threaded Fitting 6. 3/8″ NPT Port with optional Plug 7. Water & Sediment Area 8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OSGL12DP Oil Sight Glass Level Monitor
$251.30The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Level Monitoring Area: 12 in / 305 mm Overall Length: 15.5 in / 394 mm Features: By the Numbers 1. ND-2 Breather 2. Level Monitoring Area 3. Idle/Maximum Oil Level Marker 4. Running/Minimum Oil Level Marker 5. 3/8″ NPT Port with threaded Fitting 6. 3/8″ NPT Port with optional Plug 7. Water & Sediment Area 8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OSGL15DP Oil Sight Glass Level Monitor
$277.76The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Level Monitoring Area: 15 in / 381 mmOverall Length: 18.5 in / 470 mm Features: By the Numbers 1. ND-2 Breather2. Level Monitoring Area3. Idle/Maximum Oil Level Marker4. Running/Minimum Oil Level Marker5. 3/8″ NPT Port with threaded Fitting6. 3/8″ NPT Port with optional Plug7. Water & Sediment Area8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OSGL18DP Oil Sight Glass Level Monitor
$304.21The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Level Monitoring Area: 18 in / 457 mmOverall Length: 21.5 in / 546 mm Features: By the Numbers 1. ND-2 Breather2. Level Monitoring Area3. Idle/Maximum Oil Level Marker4. Running/Minimum Oil Level Marker5. 3/8″ NPT Port with threaded Fitting6. 3/8″ NPT Port with optional Plug7. Water & Sediment Area8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OSGL24DP Oil Sight Glass Level Monitor
$330.66The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Level Monitoring Area: 24 in / 610 mmOverall Length: 27.5 in / 699 mm Features: By the Numbers 1. ND-2 Breather2. Level Monitoring Area3. Idle/Maximum Oil Level Marker4. Running/Minimum Oil Level Marker5. 3/8″ NPT Port with threaded Fitting6. 3/8″ NPT Port with optional Plug7. Water & Sediment Area8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OSGL3DP Oil Sight Glass Level Monitor
$191.78The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Level Monitoring Area: 3 in / 76 mmOverall Length: 6.5 in / 165 mm Features: By the Numbers 1. ND-2 Breather2. Level Monitoring Area3. Idle/Maximum Oil Level Marker4. Running/Minimum Oil Level Marker5. 3/8″ NPT Port with threaded Fitting6. 3/8″ NPT Port with optional Plug7. Water & Sediment Area8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OSGL6DP Oil Sight Glass Level Monitor
$211.62The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Level Monitoring Area: 6 in / 152 mmOverall Length: 9.5 in / 241 mm Features: By the Numbers 1. ND-2 Breather2. Level Monitoring Area3. Idle/Maximum Oil Level Marker4. Running/Minimum Oil Level Marker5. 3/8″ NPT Port with threaded Fitting6. 3/8″ NPT Port with optional Plug7. Water & Sediment Area8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical CompatibilityAll mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OSGL9DP Oil Sight Glass Level Monitor
$231.46The Oil Sight Glass Level Monitor (OSGL) allows you to view oil color, clarity and accumulation of water or other contaminants while monitoring the level of the oil in the reservoir. It is available in multiple lengths ranging from 3″ to 24″ to correspond to the distance from the oil reservoir access port and the maximum height the oil will reach. The secondary 3/8″ NPT port opposite the installation nipple allows for the connection of a sampling tube to draw representative oil samples without pulling outside contaminants. Level Monitoring Area: 9 in / 229 mm Overall Length: 12.5 in / 318 mm Features: By the Numbers 1. ND-2 Breather 2. Level Monitoring Area 3. Idle/Maximum Oil Level Marker 4. Running/Minimum Oil Level Marker 5. 3/8″ NPT Port with threaded Fitting 6. 3/8″ NPT Port with optional Plug 7. Water & Sediment Area 8. 1/4″ Drain Valve Specs Material Stain-resistant acrylic Brass fittings standard Des-Case ND-2 breather 0.3μ absolute (ß0.3≥1000) Recommended Temperature Range -40˚F to 200˚F -40˚C to 93˚C Maximum Operating Pressure 65 psi 4.48 bar Chemical Compatibility All mineral and synthetic oils Available Options Lengths ranging from 3” to 24” Stainless steel fittings Magnetic drain valve for collecting ferrous material Applications: Pumps Gearboxes Storage Tanks Oil Sight Glass Level Monitor Technical Specs -
Des-Case DC-OTC-C-10 Oil Transfer Container
$44.062.6 Gallon/ 10 Liter Container Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. FeaturesPerformance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case DC-OTC-C-4 Oil Transfer Container
$23.321 Gallon/ 4 Liter Container Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. FeaturesPerformance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case DC-OTC-C-7 Oil Transfer Container
$27.771.8 Gallon/ 7 Liter Container Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. FeaturesPerformance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case DC-OTC-D102R816BB2 Oil Trasfer Container Kit
$123.05Dispensing Unit (10 liters)Dispensing Unit Kit Includes: (1) Container 10 liter / 2.6 gal, (1) Lid with Iso B 3/4" and DC-BB black, (1) 8" spout black with 1" tip Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. FeaturesPerformance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS -
Des-Case DC-OTC-D42R88BB2 Oil Trasfer Container Kit
$102.32Dispensing Unit (4 liters)Dispensing Unit Kit Includes: (1) Container 4 liter / 1 gal, (1) Lid with Iso B 3/4" and DC-BB black, (1) 8" spout black with 1/2" tip Oil Transfer Containers provide the first best practice solution to keep oil clean and dry during oil transfer. With non-desiccant and desiccant breather options available, as well as quick connects for clean filling, these transfer containers isolate oil from the environment providing the ultimate in best practice contamination control. FeaturesPerformance For keeping oil clean and dry during storage and transfer to machinery within ambient temperature ranges of -40ºF to 176ºF (-40°C to 80°C). Materials & Components Dispensing Lid and Spouts: – Nylon – 304 Stainless Steel – Steel – Buna-N – HDPE & PTFE Pump Lid, with Pump 304 Stainless Steel Steel Fluoro-silicone Silicone – Nylon PVC Polyurethane Aluminum HDPE Container HDPE Applications Transferring small volumes of oil Topping off reservoirs Small volume storage How it Works Oil Transfer Containers are the perfect solution for small volume transfers of oil to machines. Industrial-grade HDPE containers will not chemically react with oil or additive packages. The trigger mechanism in the dispensing lid keeps fluid isolated until engaged, controlling moisture and contamination. Optional non-desiccant or desiccant breathers keep oil clean and dry while in the container. An optional ISO B quick connect allows new, pre-filtered oil to be added to the container without exposing it to the atmosphere. The interchangeable spouts allow more flexibility with the standard dispensing lid and eliminate the need for funnels. They are available in different lengths, tip sizes, colors, and either rigid or extended options. Additional accessories like the pump lid, pump, and color-coding label system allow for even more control of your lubricant storage and handling. Using the Oil Transfer Container and its best practices options ensures the oil transferred to your equipment is free of contamination. TDS