Deacon
Showing 1–45 of 56 results
-
Deacon 103-L Accelerator
$153.97What is the Deacon 103-L Accelerator?DEACON 103-L will accelerate the curing process of some Deacon thermosetting compounds. Must be used in conjunction with heat (minimum of 150F/65C) and will not cure the material without heat also being present. Not recommended above 600F (316C). Ideal for NPT pipe fittings.What are the specifications of the 103-L Accelerator?Base Materials HexamethylenetetramineService Rating 150°F to 600°F (65°C - 316°C)What is the part number for the 103-L Accelerator?Deacon part number 111-103-L 2 OZ, 103-L 2 oz..What should you check before ordering the 103-L Accelerator?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 103-L Accelerator from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 103-P Accelerator
Price range: $123.15 through $919.02What is the Deacon 103-P Accelerator?Will accelerate cure of heat reactive compounds to aid in achieving a seal in situations of lower temperatures. Must be used in conjunction with heat (a minimum of 150ºF/ 65ºC). Not recommended above 600ºF (316ºC). Unlimited shelf-life. Mix Ratio: (1 tablespoon or 16 grams) per J-Stick, (2 oz. or 62 grams) per quart, (1/2 lb. or .22 kg) per Gallon. Mix ratio recommendations are general, does not have to be exact to achieve a quicker cure.What are the specifications of the 103-P Accelerator?Service Rating 150ºF (65ºC) to 600ºF (316ºC)Quarts, GallonsWhat are the characteristics of the 103-P Accelerator?75%+ Faster cureGranular powder consistencyWhere is the 103-P Accelerator used?Used to speed up the cure rate of Deacon resin based thermo-setting compounds.Which Deacon 103-P Accelerator do I order?2 oz.: part number 111-103-P 2 OZPint: part number 111-103-P PINTQuart: part number 111-103-P QUARTGallon: part number 111-103-P GALLONWhat should you check before ordering the 103-P Accelerator?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 103-P Accelerator from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 189 Graphite Injectable Sealant / Packing
Price range: $107.71 through $1,712.51What is the Deacon 189 Graphite Injectable Sealant / Packing?Exceptional temperature range and application uses. Non-curing, Graphite based, Dense, Highly compressible, Excellent travel, Superior chemical resistance, Gray color. Shelf-life is 1 year in closed containers / packages.What are the specifications of the 189 Graphite Injectable Sealant / Packing?Service Rating -240ºF to 1800ºF (-151ºC to 982ºC) Vacuum to 4600 PSI (317 Bar)J-Sticks, Plugs, 7/8 x 6 sticksWhat are the characteristics of the 189 Graphite Injectable Sealant / Packing?Thermal expansion above 380ºF (193ºC)No carrier extrusionLimited off-gassingRemains flexible at high temperaturesNon-reactive to most volatile organic compounds, solvents, acids, alkalis, and corrosive gasesWhere is the 189 Graphite Injectable Sealant / Packing used?Valves, Flanges, Clamps, Enclosures, Perimeter Seals, Wire Wraps, Stuffing Boxes, Pumps, Rotating Equipment.Which Deacon 189 Graphite Injectable Sealant / Packing do I order?J-Stick: part number 111-189 J STICKPlug (Pack of 100): part number 111-189 PLUG7/8 Stick (Pack of 35): part number 111-189 7/8 X 6Some options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100; 7/8 Stick (Pack of 35) is pack of 35. Every other option is one item.What should you check before ordering the 189 Graphite Injectable Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 189 Graphite Injectable Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 275-CHLORINE Chemically Inert PTFE Thread Sealant
$847.02What is the Deacon 275-CHLORINE Chemically Inert PTFE Thread Sealant?A non-hardening, non-reactive, hydrocarbon free, self-lubricating thread sealant. Formulated to be corrosion inhibiting, non-migrating, and odorless, DEACON 275-CHLORINE contains no solvents and has excellent anti-seize properties. It's designed for use on chlorine, aggressive chemicals, and powerful oxidizers.What are the specifications of the 275-CHLORINE Chemically Inert PTFE Thread Sealant?Base Materials PTFEService Rating -50°F (-45°C) to 400°F (204°C) Up to 10,000 psi (689 Bar)What is the part number for the 275-CHLORINE Chemically Inert PTFE Thread Sealant?Deacon part number 111-275-CHLORINE 8 OZ, 275-Chlorine 1/2 Pint.What should you check before ordering the 275-CHLORINE Chemically Inert PTFE Thread Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 275-CHLORINE Chemically Inert PTFE Thread Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 289 Graphite Injectable Sealant / Packing
Price range: $90.37 through $969.70What is the Deacon 289 Graphite Injectable Sealant / Packing?V.O.C. Free - 100% Graphite Solids | Non-curing, Good travel, Highly lubricous, Low friction, Valve packing. Shelf life is unlimited.What are the specifications of the 289 Graphite Injectable Sealant / Packing?Service Rating -30ºF to 1800ºF (-34ºC to 982ºC)5/8" x 3" Plugs, J-Sticks, Bulk GallonsWhat are the characteristics of the 289 Graphite Injectable Sealant / Packing?V.O.C. ServiceLow injection pressure requiredSemi-flexible at extreme temperatures and pressuresWhere is the 289 Graphite Injectable Sealant / Packing used?Valves, Flanges, Enclosures, Reduce or eliminate Fugitive Emissions in VOC Valve Packings, Alcohols, Benzene, Butane, Carbon dioxide, Fuel oils, Hydrocarbons, Hydrogen, Ketones, Steam, Synthetic gases, Oils.Which Deacon 289 Graphite Injectable Sealant / Packing do I order?289 J-Stick: part number 111-289 J-STICK289 Gallon: part number 111-289 GALLON289 Plug (Pack of 100): part number 111-289 PLUG289-SS J-Stick: part number 111-289-SS J STICKSome options here are sold by the pack and some as a single item, and the price follows the option: 289 Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 289 Graphite Injectable Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 289 Graphite Injectable Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 300 PTFE Injectable Sealant / Packing
Price range: $137.63 through $1,302.75What is the Deacon 300 PTFE Injectable Sealant / Packing?Extreme Low Temperatures - Pumps Easily | 100% PTFE (fibers, fillers and particles). Lubricant carrier. Grayish color. Great Travel. Customers feedback reports use to-240ºF (-151ºC). Excellent resistance to most solvents and acids (not for use on oxidizing chemicals). Shelf life is 2 years in closed containers.What are the specifications of the 300 PTFE Injectable Sealant / Packing?Service Rating -180ºF to 500ºF (-117ºC to 260ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" Sticks, Bulk GallonsWhere is the 300 PTFE Injectable Sealant / Packing used?Packing and sealant for valves, flanges and enclosures.Which Deacon 300 PTFE Injectable Sealant / Packing do I order?J-Stick: part number 111-300 J-STICKGallon: part number 111-300 GALLONPlug (Pack of 100): part number 111-300 PLUG7/8 Stick (Pack of 24): part number 111-300 7/8 X 6Some options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100; 7/8 Stick (Pack of 24) is pack of 24. Every other option is one item.What should you check before ordering the 300 PTFE Injectable Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 300 PTFE Injectable Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 302 Injectable Sealant
Price range: $104.37 through $1,104.70What is the Deacon 302 Injectable Sealant?Resin based, Non-hardening, Compression seal, Putty consistency, Does not bleed carrier. Shelf-life is 6 months in closed containers.What are the specifications of the 302 Injectable Sealant?Service Rating 0ºF to 400ºF (-17ºC to 204ºC)5/8" x 3" Plugs, J-SticksWhere is the 302 Injectable Sealant used?Valves, Flanges, Enclosures, Water, Di-Ester type fluids, Diesel fuels, Gasoline, Lubricating oils, Greases, Aliphatic hydrocarbons.Which Deacon 302 Injectable Sealant do I order?J-Stick: part number 111-302 J-STICKPlug (Pack of 100): part number 111-302 PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 302 Injectable Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 302 Injectable Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 3100 Extruded Gasket Compound
Price range: $530.94 through $2,415.12What is the Deacon 3100 Extruded Gasket Compound?An extruded putty-like joint sealant that can be used with or without a fabricated gasket, thus eliminating the need to inventory various gasket sizes and types. DEACON 3100 is fully compressible to 0.002 and will conform to any surface pits, steam cuts, or gaps caused by irregularities or warpage. Ideal for a gasket replacement, 3100 will achieve a leak-free seal on similar or dissimilar mating surfaces in steam, hot air, or various chemical environments. It's well suited for use on any application involving pipeline or containment vessels that direct the flow of numerous industrial substances in gaseous, liquid, or solid form. 3100 cures to a flexible leather-like consistency and will not cement joints together.What are the specifications of the 3100 Extruded Gasket Compound?Base Materials ResinService Rating 200°F (93°C) to 950°F (510°C) Up to 1500 psi (103 Bar)Which Deacon 3100 Extruded Gasket Compound do I order?3100 1/16" 1 lb. Roll (228 ft.): part number 111-3100 1/16 INCH 1 LB3100 1/4" 1 lb. Roll (33 ft.): part number 111-3100 1/4 INCH 1 LB3100 1/8" 1 lb. Roll (124 ft.): part number 111-3100 1/8 INCH 1 LB3100 3/16" 1 lb. Roll (55 ft.): part number 111-3100 3/16 INCH 1 LB3100 3/8" 1 lb. Roll (15 ft.): part number 111-3100 3/8 INCH 1 LB3100 1/2" 5 lb. Roll (38 ft.): part number 111-3100 1/2 INCH 5 LB3100 3/4" 5 lb. Roll (19 ft.): part number 111-3100 3/4 INCH 5 LB3100 3/8" 5 lb. Roll (88 ft.): part number 111-3100 3/8 INCH 5 LBWhat should you check before ordering the 3100 Extruded Gasket Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 3100 Extruded Gasket Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 3300 Extruded Gasket Compound
Price range: $171.20 through $2,649.65What is the Deacon 3300 Extruded Gasket Compound?Deacon 3300 is a fully compressible putty-like joint sealant that is packaged on a spool, in various diameters and lengths. Rated to 1600F (871C) and 1500 PSI (103 Bar), it can be used to replace a gasket or in conjunction with traditional fabricated gaskets to seal against steam, hot air, and various chemical environments. Deacon 3300 allows for a fast / easy repair and can be used to eliminate a costly inventory of various sized gaskets and types. Simply compressing the cord between two mating surfaces will achieve an initial seal. Upon heat exposure from startup, the product will cure to a flexible leather- like consistency that will not cement the joints together (remains removeable). Ideal for joint applications that have surface defects, steam cuts, pits, and other irregularities, Deacon 3300 can compress down to 0.002 inches (0.05 mm) to fill the voids and achieve a leak-free seal. Equipment types include access doors, boilers, turbines, heat exchangers, and incinerators. When trying to determine the thickness of Deacon 3300 required, a general rule for sufficient sealant compression is three times the thickness of the gap to be sealed. Example: 1/8” flange cut or gap = 3/8” Dia. SealantWhat are the specifications of the 3300 Extruded Gasket Compound?Base Materials ResinService Rating 600°F (315°C) to 1600°F (871°C) Up to 1500 psi (103 Bar)Which Deacon 3300 Extruded Gasket Compound do I order?3300 1/2" 5 lb. Roll (37 ft.): part number 111-3300 1/2 INCH 5 LB3300 1/4" 1 lb. Roll (34 ft.): part number 111-3300 1/4 INCH 1 LB3300 3/4" 5 lb. Roll (19 ft.): part number 111-3300 3/4 INCH 5 LB3300 3/8" 1 lb. Roll (17 ft.): part number 111-3300 3/8 INCH 1 LB3300 3/8" 5 lb. Roll (80 ft.): part number 111-3300 3/8 INCH 5 LB3300 1/4" x 17 in. Piece: part number 111-3300 1/4 INCH 17 INWhat should you check before ordering the 3300 Extruded Gasket Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 3300 Extruded Gasket Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 333 PTFE Injectable Sealant / Packing
Price range: $141.50 through $1,314.00What is the Deacon 333 PTFE Injectable Sealant / Packing?Low Temperature Rated - High Fiber Concentration | 100% PTFE (fibers, fillers and particles). Lubricant carrier. White color. Excellent Travel. High fiber concentration for good bridging, but flows easily. Shelf life is 2 years in closed containers.What are the specifications of the 333 PTFE Injectable Sealant / Packing?Service Rating -100ºF to 500ºF (-73ºC to 260ºC)5/8" x 3" Plugs, J-Sticks, Bulk GallonsWhat are the characteristics of the 333 PTFE Injectable Sealant / Packing?Excellent resistance to most solvents and acids (not for use on oxidizing chemicals).Where is the 333 PTFE Injectable Sealant / Packing used?Packing for valves, flanges and enclosures.Which Deacon 333 PTFE Injectable Sealant / Packing do I order?J-Stick: part number 111-333 J-STICKGallon: part number 111-333 GALLONPlug (Pack of 100): part number 111-333 PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 333 PTFE Injectable Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 333 PTFE Injectable Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 340 PTFE – Graphite – Aramid Sealant / Packing, Pack of 100
$923.78What is the Deacon 340 PTFE - Graphite - Aramid Sealant / Packing?Non-curing, Very dense, Compacts to form a high pressure barrier, Remains flexible, Greenish yellow color. Shelf-life is 2 years in closed containers.What are the specifications of the 340 PTFE - Graphite - Aramid Sealant / Packing?Service Rating -40ºF to 500ºF (-40ºC to 260ºC)5/8" x 3" PlugsWhat are the characteristics of the 340 PTFE - Graphite - Aramid Sealant / Packing?Good chemical resistanceGood bridging capabilities and lubricityWhere is the 340 PTFE - Graphite - Aramid Sealant / Packing used?Packing for valves, Flanges, Enclosures, Steam service, Water service, Chemical processes (not for use on oxidizing chemicals)What is the part number for the 340 PTFE - Graphite - Aramid Sealant / Packing?Deacon part number 111-340 PLUG, 340 Plug [100 each - 5/8 x 3].The 2026 manufacturer price list prices this item by the pack, so what you order is the pack: Pack of 100. The price shown is the price of that pack.What should you check before ordering the 340 PTFE - Graphite - Aramid Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 340 PTFE - Graphite - Aramid Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 350 PTFE Injectable Sealant / Packing
Price range: $141.50 through $1,314.00What is the Deacon 350 PTFE Injectable Sealant / Packing?100% PTFE (fibers, fillers and particles). Organic carrier. Yellow color. Good travel. High fiber concentration for good bridging. Excellent resistance to most solvents and acids (not for use on oxidizing chemicals). Shelf life is 2 years in closed containers.What are the specifications of the 350 PTFE Injectable Sealant / Packing?Service Rating -25ºF to 500ºF (-31ºC to 260ºC)5/8" x 3" Plugs, J-Sticks, Bulk GallonsWhat are the characteristics of the 350 PTFE Injectable Sealant / Packing?Excellent chemical resistanceWhere is the 350 PTFE Injectable Sealant / Packing used?Packing for valves, flanges and enclosures.Which Deacon 350 PTFE Injectable Sealant / Packing do I order?J-Stick: part number 111-350 J-STICKGallon: part number 111-350 GALLONPlug (Pack of 100): part number 111-350 PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 350 PTFE Injectable Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 350 PTFE Injectable Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 360-FG PTFE Injectable Sealant / Packing – Food Grade
Price range: $652.62 through $2,153.18What is the Deacon 360-FG PTFE Injectable Sealant / Packing - Food Grade?100% PTFE (fibers, fillers and particles). White color. Excellent travel. High fiber concentration for good bridging but flows easily. Excellent resistance to most solvents and acids (not for use on oxidizing chemicals). Shelf life is 2 years in closed containers.What are the specifications of the 360-FG PTFE Injectable Sealant / Packing - Food Grade?Service Rating -50ºF to 500ºF (-45ºC to 260ºC)Quarts, GallonsWhat are the characteristics of the 360-FG PTFE Injectable Sealant / Packing - Food Grade?Food gradeExcellent chemical resistanceWhere is the 360-FG PTFE Injectable Sealant / Packing - Food Grade used?Packing and sealant for valves, flanges, and enclosures.Which Deacon 360-FG PTFE Injectable Sealant / Packing - Food Grade do I order?Quart: part number 111-360-FG QUARTGallon: part number 111-360-FG GALLONWhat should you check before ordering the 360-FG PTFE Injectable Sealant / Packing - Food Grade?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 360-FG PTFE Injectable Sealant / Packing - Food Grade from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 375-OX & 375-OXP PTFE Injectable Sealant / Packing – Oxygen / Chlorine
Price range: $1,594.11 through $1,849.22What is the Deacon 375-OX & 375-OXP PTFE Injectable Sealant / Packing - Oxygen / Chlorine?375-OXP is a thinner paste version. Certified at NASA White Sands Test Facility: NASA-STD-6001 (ASTM D 2512) Compatibility of Materials with Liquid Oxygen ASTM G 72-82 Auto Ignition Temperature Determination in High Pressure Oxygen (AIT TEST) Oxygen / Chlorine Grade | Non-curing, 100% PTFE (fibers, fillers and particles), Non-reactive synthetic carrier, Dense putty consistency, White color. High fiber concentration for good bridging. Excellent resistance to oxygen, chlorine, chemicals, oxidizers, solvents, and acids. NOTE: DO NOT INJECT WITH ANY POSSIBILITY OF CONTAMINATION FROM HYDRAULIC FLUID. Shelf-life is 2 years in closed containers.What are the specifications of the 375-OX & 375-OXP PTFE Injectable Sealant / Packing - Oxygen / Chlorine?Service Rating -50ºF to 400ºF (-45ºC to 204ºC)Quarts (3 lb.)Where is the 375-OX & 375-OXP PTFE Injectable Sealant / Packing - Oxygen / Chlorine used?Valves, Flanges, Enclosures, Oxygen, Chlorine, Oxidizers.Which Deacon 375-OX & 375-OXP PTFE Injectable Sealant / Packing - Oxygen / Chlorine do I order?375-OX Quart: part number 111-375-OX QUART375-OXP Quart: part number 111-375-OX-P QUARTWhat should you check before ordering the 375-OX & 375-OXP PTFE Injectable Sealant / Packing - Oxygen / Chlorine?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 375-OX & 375-OXP PTFE Injectable Sealant / Packing - Oxygen / Chlorine from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 383 PTFE Based Injectable Sealant / Packing
Price range: $151.38 through $1,372.90What is the Deacon 383 PTFE Based Injectable Sealant / Packing?Dense formulation. Yellowish color. For large void fills, will bleed less carrier. Good travel. High fiber concentration for good bridging. Excellent resistance to most solvents and acids (not for use on oxidizing chemicals). Shelf life is 2 years in closed containers.What are the specifications of the 383 PTFE Based Injectable Sealant / Packing?Service Rating -25ºF to 500ºF (-31ºC to 260ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" Sticks, Bulk GallonsWhat are the characteristics of the 383 PTFE Based Injectable Sealant / Packing?Less carrier extrusionExcellent chemical resistanceWhere is the 383 PTFE Based Injectable Sealant / Packing used?Packing and sealant for valves, flanges and enclosures.Which Deacon 383 PTFE Based Injectable Sealant / Packing do I order?J-Stick: part number 111-383 J-STICKPlug (Pack of 100): part number 111-383 PLUG7/8 Stick (Pack of 24): part number 111-383 7/8 X 6Some options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100; 7/8 Stick (Pack of 24) is pack of 24. Every other option is one item.What should you check before ordering the 383 PTFE Based Injectable Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 383 PTFE Based Injectable Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 389 Graphite Injectable Sealant / Packing
Price range: $105.18 through $2,425.47What is the Deacon 389 Graphite Injectable Sealant / Packing?V.O.C. Free - 100% Graphite Solids | Non-curing, Average travel, Highly lubricous, Low friction, Valve packing. Shelf life is unlimited.What are the specifications of the 389 Graphite Injectable Sealant / Packing?Service Rating -30ºF. to 1800ºF (-34ºC to 982ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" Sticks, Bulk GallonsWhat are the characteristics of the 389 Graphite Injectable Sealant / Packing?V.O.C. ServiceSemi-flexible at extreme temperatures and pressuresWhere is the 389 Graphite Injectable Sealant / Packing used?Valves, Flanges, Enclosures, Reduce or eliminate Fugitive Emissions in VOC Valve Packings, Alcohols, Benzene, Butane, Carbon dioxide, Fuel oils, Hydrocarbons, Hydrogen, Ketones, Steam, Synthetic gases, Oils.Which Deacon 389 Graphite Injectable Sealant / Packing do I order?J-Stick: part number 111-389 J-STICKGallon: part number 111-389 GALLONPlug (Pack of 100): part number 111-389 PLUG7/8 Stick (Pack of 24): part number 111-389 7/8 X 6 STICK389-SS Plug (Pack of 100): part number 111-389-SS PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100; 7/8 Stick (Pack of 24) is pack of 24; 389-SS Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 389 Graphite Injectable Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 389 Graphite Injectable Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 400 & 410 One-Part Rubber
Price range: $40.40 through $2,142.24What is the Deacon 400 & 410 One-Part Rubber?Moisture / Air Curing Rubber | Black color (400) Red color (410). Cures to a low durometer solid. DO NOT expose unused material to air or moisture. A partial cure occurs in approx. 5 minutes. Mix with a Dry-Pak fiber mixture to ensure curing as quickly as possible throughout the cross section and to increase the bridging capabilities of the rubber (wetting the fibers with water will speed up the curing process). Whenever possible, try to expose the rubber to water or steam as it is injected. Shelf-life is 1 year in closed containers.What are the specifications of the 400 & 410 One-Part Rubber?Service Rating [DEACON 400] -50ºF to 450ºF (-45ºC to 232ºC) [DEACON 410] -85ºF to 600ºF (-65ºC to 315ºC)Caulking Tubes, Gallons, 4.5 Gallon Pails (Tapered)What are the characteristics of the 400 & 410 One-Part Rubber?Recommended for use with a volume pump on large jobs (note pails are tapered)Where is the 400 & 410 One-Part Rubber used?Flanges, Enclosures, Water service, Void fillWhich Deacon 400 & 410 One-Part Rubber do I order?400 Tube (must order in multipes of 12): part number 111-400 TUBE400 Gallon: part number 111-400 GALLON400 4.5 Gallon Pail: part number 111-400 4-1/2 GALLON410 Tube (must order in multipes of 12): part number 111-410 TUBEWhat should you check before ordering the 400 & 410 One-Part Rubber?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 400 & 410 One-Part Rubber from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 4011 Thermal Reactive Liquid Sealing Compound
Price range: $285.89 through $503.98What is the Deacon 4011 Thermal Reactive Liquid Sealing Compound?A heat curing liquid sealing compound used in high temperature and high pressure applications. In the presence of heat, DEACON 4011 will form a mechanical-type seal that is unaffected by thermal cycling. This compound will not cement joints together so, it will not interfere with future repairs of metal-to-metal joints. 4011 will achieve a leak-free seal on similar or dissimilar mating surfaces in steam, hot air, oil, or various chemical environments.What are the specifications of the 4011 Thermal Reactive Liquid Sealing Compound?Base Materials ResinService Rating 600°F (315°C) to 1350°F (732°C) Up to 11,000 psi (758 Bar)Which Deacon 4011 Thermal Reactive Liquid Sealing Compound do I order?Pint: part number 111-4011 PINTQuart: part number 111-4011 QUARTWhat should you check before ordering the 4011 Thermal Reactive Liquid Sealing Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 4011 Thermal Reactive Liquid Sealing Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 4011-P Thermal Reactive Paste Sealing Compound
Price range: $186.74 through $458.11What is the Deacon 4011-P Thermal Reactive Paste Sealing Compound?A heat curing paste sealing compound used in high temperature and high pressure applications. In the presence of heat, DEACON 4011-P will form a mechanical-type seal that is unaffected by thermal cycling. This compound will not cement joints together, so it will not interfere with future repairs of metal-to-metal joints. 4011-P will achieve a leak-free seal on similar or dissimilar mating surfaces in steam, hot air, oil, or various chemical environments.What are the specifications of the 4011-P Thermal Reactive Paste Sealing Compound?Base Materials ResinService Rating 600°F (315°C) to 1350°F (732°C) Up to 11,000 psi (758 Bar)Which Deacon 4011-P Thermal Reactive Paste Sealing Compound do I order?10.3 oz. Caulk Tube: part number 111-4011-P TUBEQuart: part number 111-4011-P QUARTWhat should you check before ordering the 4011-P Thermal Reactive Paste Sealing Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 4011-P Thermal Reactive Paste Sealing Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 402 Rubber Compound
Price range: $1,011.30 through $1,895.66What is the Deacon 402 Rubber Compound?Deacon 402 is a one-part heat curing rubber semi-solid extrusion. Designed for leak repair applications up to 500ºF (260ºC). Cures in service at temperatures above 150ºF (65ºC). Applications: Clamps, Enclosures, Flanges, etc. Perfect for water, condensate, boiler feed water, steam, ammonia, methanol, and caustic.What are the benefits of the 402 Rubber Compound?No out-gassing or carrier extrusionRemains a durable rubber consistencyWhat are the specifications of the 402 Rubber Compound?Service Rating -50ºF (-45ºC) to 500ºF (260ºC)Which Deacon 402 Rubber Compound do I order?402 Plug (Pack of 100): part number 111-402 PLUG402-SS Plug (Pack of 100): part number 111-402-SS PLUGThe 2026 manufacturer price list prices this item by the pack, so what you order is the pack: Pack of 100. The price shown is the price of that pack.What should you check before ordering the 402 Rubber Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 402 Rubber Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 402-CF One-Part Heat Curing Rubber Extrusion
Price range: $98.43 through $1,064.50What is the Deacon 402-CF One-Part Heat Curing Rubber Extrusion?Heat Curing Rubber Compound | Deacon 402-CF contains carbon and aramid fibers. Pressure Containment: 1/8" Hole 450 psi (uncured) 1/8" Hole 8000 psi (cured). Cures in service at temperatures above 150ºF. (65ºC.)What are the specifications of the 402-CF One-Part Heat Curing Rubber Extrusion?Service Rating -50ºF to 500ºF (-45ºC to 260ºC) - Flexible up to 400ºF (204.4ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" SticksWhere is the 402-CF One-Part Heat Curing Rubber Extrusion used?Enclosures, Flanges, etc. | Excellent resistance to water and steam.Which Deacon 402-CF One-Part Heat Curing Rubber Extrusion do I order?J-Stick: part number 111-402-CF J STICKPlug (Pack of 100): part number 111-402-CF PLUG7/8 Stick (Pack of 24): part number 111-402-CF 7/8 X 6Some options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100; 7/8 Stick (Pack of 24) is pack of 24. Every other option is one item.What should you check before ordering the 402-CF One-Part Heat Curing Rubber Extrusion?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 402-CF One-Part Heat Curing Rubber Extrusion from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 402-XT Rubber Compound
Price range: $108.30 through $1,170.98What is the Deacon 402-XT Rubber Compound?Deacon 402-XT is a one-part heat curing rubber semi-solid extrusion impregnated with steel and aramid fibers. Cures in service at temperatures above 150ºF (65ºC). Prior to heat exposure, a positive seal is achieved upon compression. Applications: Clamps, Enclosures, Flanges, Bad Blows, etc. Perfect for boiler feed water, condensate, steam, and acids.What are the benefits of the 402-XT Rubber Compound?Expands with heatCures to tough rubber consistencyMinimal out-gassingNo carrier extrusionWhat are the specifications of the 402-XT Rubber Compound?Service Rating -50ºF (-45ºC) to 700ºF (371ºC)Which Deacon 402-XT Rubber Compound do I order?J-Stick: part number 111-402-XT J-STICKPlug (Pack of 100): part number 111-402-XT PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 402-XT Rubber Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 402-XT Rubber Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 404 & 404-L Two-Part Rubber
Price range: $568.80 through $1,653.98What is the Deacon 404 & 404-L Two-Part Rubber?Gasoline, Hydrocarbons, Solvents (Mineral Spirits, Naphtha, etc.), Alcohols, Water, HF Acid (Under 25%), Sodium hydroxide, Transformer oils. NOT FOR USE ON DOWTHERM.What are the specifications of the 404 & 404-L Two-Part Rubber?Service Rating -88ºF to 230ºF (-66ºC to 110ºC)Pint Kits (.47 L), Quart Kits (.94 L), Gallon Kits (3.7 L)What are the characteristics of the 404 & 404-L Two-Part Rubber?Perfect for void fill applicationsRemains flexibleExcellent resistance to gasoline, transformer oils, and hydrocarbonsWhich Deacon 404 & 404-L Two-Part Rubber do I order?404-L Quart Kit: part number 111-404-L QUART KIT404-L Gallon Kit: part number 111-404-L GAL KIT404 Quart Kit: part number 111-404 QUART KIT404 Gallon Kit: part number 111-404 GALLON KITWhat should you check before ordering the 404 & 404-L Two-Part Rubber?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 404 & 404-L Two-Part Rubber from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 427 Two-Part Epoxy – Resin Pours / Void Fill
Price range: $291.57 through $907.94What is the Deacon 427 Two-Part Epoxy - Resin Pours / Void Fill?Pourable epoxy system designed for void fill applications. Fully cures at room temperature (65ºF to 70ºF / 18ºC to 21ºC) in 24 hours. Product will harden at room temperature in 6-8 hours. Heat curing is also an option for a faster set up time and to further increase temperature resistance. Available in Liquid or Fiber Mix. Not recommended if leak is active or can't be stopped.What are the specifications of the 427 Two-Part Epoxy - Resin Pours / Void Fill?Service Rating Up to 400ºF (204ºC)Quarts, GallonsWhat are the characteristics of the 427 Two-Part Epoxy - Resin Pours / Void Fill?Leak must be inactive or stop-gapped before pouringUnsurpassed chemical resistanceCures to a strong, hard, corrosion resistant solidWhere is the 427 Two-Part Epoxy - Resin Pours / Void Fill used?Void fill pours, Concrete stabilization, Corrosion resistance, Caustics, Acids, Fuels, Solvents. Not recommended on oxidizers.Which Deacon 427 Two-Part Epoxy - Resin Pours / Void Fill do I order?427 Epoxy Fiber Part 1 Quart: part number 111-427-PT1F QUART427 Epoxy Liquid Part 1 Quart: part number 111-427-PT1L QUART427 Epoxy Fiber Part 2 Quart: part number 111-427-PT2F QUART427 Epoxy Liquid Part 2 Quart: part number 111-427-PT2L QUART427 Epoxy Fiber Part 1 Gallon: part number 111-427-PT1F GALLON427 Epoxy Liquid Part 1 Gallon: part number 111-427-PT1L GALLON427 Epoxy Fiber Part 2 Gallon: part number 111-427-PT2F GALLON427 Epoxy Liquid Part 2 Gallon: part number 111-427-PT2L GALLONWhat should you check before ordering the 427 Two-Part Epoxy - Resin Pours / Void Fill?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 427 Two-Part Epoxy - Resin Pours / Void Fill from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 440-T Injectable Liquid Sealant
$275.60What is the Deacon 440-T Injectable Liquid Sealant?Heat curing, Thin liquid, Excellent travel, Dark brown color. Can be thickened by adding Dry-Pak. Cure time can be accelerated by adding Deacon 103-P Accelerator. Shelf-life is 6 months in closed containers.What are the specifications of the 440-T Injectable Liquid Sealant?Service Rating 200ºF to 950ºF (93ºC to 510ºC)QuartsWhat are the characteristics of the 440-T Injectable Liquid Sealant?Cures to a flexible seal that remains pliable during expansion and contractionWill not adhere to metal surfacesExcellent chemical resistanceWhere is the 440-T Injectable Liquid Sealant used?Flanges, Enclosures, Threaded fittings, Studs.What is the part number for the 440-T Injectable Liquid Sealant?Deacon part number 111-440-T QUART, 440-T Quart.What should you check before ordering the 440-T Injectable Liquid Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 440-T Injectable Liquid Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 460 Injectable Rubber Sealant, Pack of 25
$1,315.50What is the Deacon 460 Injectable Rubber Sealant?One-part Fluorosilicone, Heat curing, Blue color, Good travel. Shelf-life is 2 years in closed containers.What are the specifications of the 460 Injectable Rubber Sealant?Service Rating -90ºF to 450ºF (-68ºC to 232ºC)5/8" x 3" Plugs (25 per container)What are the characteristics of the 460 Injectable Rubber Sealant?Good chemical resistanceRemains flexibleAchieves seal from compression prior to heat curingWhere is the 460 Injectable Rubber Sealant used?Dilute acids, Alcohols, Alkalies, Petroleum oils, Chlorinated hydrocarbons, Hydrogenated solvents, Halogenated hydrocarbons, L.P. gas, Fuel oil, Freon, Gasoline, Motor oil, Mineral spirits, Ethylene.What is the part number for the 460 Injectable Rubber Sealant?Deacon part number 111-460 PLUG, 460 Plug [25 each - 5/8 x 3].The 2026 manufacturer price list prices this item by the pack, so what you order is the pack: Pack of 25. The price shown is the price of that pack.What should you check before ordering the 460 Injectable Rubber Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 460 Injectable Rubber Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 464 Injectable Sealant
Price range: $105.81 through $1,168.75What is the Deacon 464 Injectable Sealant?Heat curing, Dense putty with heavy fiber concentration, Brown color. Good travel in high temp applications. Use with 411 or 440-T to help travel and get into threads or tight gaps. Shelf-life is 6 months in closed containers. Refrigerated storage recommended.What are the specifications of the 464 Injectable Sealant?Service Rating 600ºF to 1350ºF (315ºC to 732ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" SticksWhat are the characteristics of the 464 Injectable Sealant?Excellent chemical resistanceHigher temperature version of Deacon 454Begins to cure above 250ºF (121ºC)Where is the 464 Injectable Sealant used?Flanges, Enclosures, Clamps, Hot hydrocarbons, Super heated steam, Extreme hot air, Benzene, Chemicals.Which Deacon 464 Injectable Sealant do I order?J-Stick: part number 111-464 J-STICKPlug (Pack of 100): part number 111-464 PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 464 Injectable Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 464 Injectable Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 5500 PTFE Sealant / Packing
$123.46What is the Deacon 5500 PTFE Sealant / Packing?DEACON 5500 is a fibrous PTFE, non-hardening, pliable injectable packing. It's ideal use is as a moldable mechanical packing for packing glands on piping system valves and seal packing for mechanical equipment. 5500 has high chemical resistance, excellent lubricity.What are the specifications of the 5500 PTFE Sealant / Packing?Base Materials PTFEService Rating -50°F to 450°F 1/8” hole @ 2000 PSI (Did not extrude)What is the part number for the 5500 PTFE Sealant / Packing?Deacon part number 111-5500 12 INCH, 5500 1/4" x 12" Piece.What should you check before ordering the 5500 PTFE Sealant / Packing?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 5500 PTFE Sealant / Packing from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 560 Injectable Sealant
Price range: $97.81 through $850.53What is the Deacon 560 Injectable Sealant?Heat curing, dense paste impregnated with metal and ceramic fibers. Excellent travel. Low injection pressure. Below 550ºF (288ºC), speed up the cure by adding 103-P Accelerator (always use accelerator when sealing boiler feed water). Shelf life is 6 months in closed container. Refrigerated storage recommended.What are the specifications of the 560 Injectable Sealant?Service Rating 250ºF to 950ºF (121ºC to 510ºC)5/8" x 3" Plugs, J-Sticks, Bulk GallonsWhat are the characteristics of the 560 Injectable Sealant?Designed for tight gaps or reinjectionsOutstanding bridging and plugging capabilitiesAlthough it becomes hard it will still expand and contract with the jointWhere is the 560 Injectable Sealant used?High pressure boiler feed water, Steam, Condensate, Hydrocarbons. Designed for bridging large gaps or voids such as uneven flange faces. Can be used for killing or plugging valves or lines no longer in use (not for use as a valve packing).Which Deacon 560 Injectable Sealant do I order?J-Stick: part number 111-560 J-STICKGallon: part number 111-560 GALLONWhat should you check before ordering the 560 Injectable Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 560 Injectable Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 66-P-SS Nuclear Grade Thermal Reactive Paste Sealing Compound
$1,250.93What is the Deacon 66-P-SS Nuclear Grade Thermal Reactive Paste Sealing Compound?Commercial Grade Clean Paste Sealant. Heat curing compound, hot fudge consistency, high chemical tolerance, includes full batch analysis report for low melting point metals, halogenated compounds, sulfur and its compounds, brush on, trowel on, or caulk.What are the specifications of the 66-P-SS Nuclear Grade Thermal Reactive Paste Sealing Compound?Base Materials ResinService Rating 200°F (93°C) to 1350°F (732°C) Up to 11,000 psi (758 Bar)What is the part number for the 66-P-SS Nuclear Grade Thermal Reactive Paste Sealing Compound?Deacon part number 111-66-P-SS PINT, 66-P-SS Pint.What should you check before ordering the 66-P-SS Nuclear Grade Thermal Reactive Paste Sealing Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 66-P-SS Nuclear Grade Thermal Reactive Paste Sealing Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 720-SF Injectable Sealant – Silica Free
Price range: $148.26 through $1,224.90What is the Deacon 720-SF Injectable Sealant - Silica Free?Heat curing, Dense putty impregnated with metal and carbon fibers, Tan color. Below 550ºF (288ºC), speed up the cure by adding SF-ACC Accelerator (always use accelerator when sealing boiler feed water). Shelf-life is 6 months in closed container. Refrigerated storage recommended.What are the specifications of the 720-SF Injectable Sealant - Silica Free?Service Rating 250ºF to 950ºF (121ºC to 510ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" SticksWhat are the characteristics of the 720-SF Injectable Sealant - Silica Free?Outstanding bridging and plugging capabilitiesWill expand and contract with the jointContains less than 1% silicaWhere is the 720-SF Injectable Sealant - Silica Free used?High pressure boiler feed water, Steam, Condensate, Hydrocarbons. Designed for bridging large gaps or voids such as uneven flange faces.Which Deacon 720-SF Injectable Sealant - Silica Free do I order?J-Stick: part number 111-720-SF J-STICKPlug (Pack of 100): part number 111-720-SF PLUG7/8 Stick (Pack of 24): part number 111-720-SF 7/8 X 6Some options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100; 7/8 Stick (Pack of 24) is pack of 24. Every other option is one item.What should you check before ordering the 720-SF Injectable Sealant - Silica Free?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 720-SF Injectable Sealant - Silica Free from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 770-L Thermal Reactive Liquid Sealing Compound
Price range: $266.08 through $482.06What is the Deacon 770-L Thermal Reactive Liquid Sealing Compound?A heat curing liquid sealant that is used in high temperature and high pressure applications. DEACON 770-L is specially designed to be a thread sealant or gasket dressing, 770-L will flow to fill small voids and surface irregularities. The proprietary formulation allows 770-L to be used as the only sealant on low-tolerance metal-to metal joints. 770-L will not cement the joints together or interfere with future repairs. In the presence of heat, 770-L will form a mechanical-type seal against steam, oils, solvents, hydrocarbons and a variety of chemicals.What are the specifications of the 770-L Thermal Reactive Liquid Sealing Compound?Base Materials ResinService Rating 200°F (93°C) to 950°F (510°C) Up to 11,000 psi (758 bar)Which Deacon 770-L Thermal Reactive Liquid Sealing Compound do I order?Pint Brush Top: part number 111-770-L PINTQuart: part number 111-770-L QUARTWhat should you check before ordering the 770-L Thermal Reactive Liquid Sealing Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 770-L Thermal Reactive Liquid Sealing Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 770-L-SS Nuclear Grade Thermal Reactive Liquid Sealing Compound
$1,175.87What is the Deacon 770-L-SS Nuclear Grade Thermal Reactive Liquid Sealing Compound?Commercial Grade Clean Liquid Sealant. Heat curing compound, honey consistency, high chemical tolerance, includes full batch analysis report for low melting point metals, halogenated compounds, sulfur and its compounds, Brush on.What are the specifications of the 770-L-SS Nuclear Grade Thermal Reactive Liquid Sealing Compound?Base Materials ResinService Rating 200°F (93°C) to 1350°F (732°C) Up to 11,000 psi (758 Bar)What is the part number for the 770-L-SS Nuclear Grade Thermal Reactive Liquid Sealing Compound?Deacon part number 111-770-L-SS PINT, 770-L-SS Pint.What should you check before ordering the 770-L-SS Nuclear Grade Thermal Reactive Liquid Sealing Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 770-L-SS Nuclear Grade Thermal Reactive Liquid Sealing Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 770-P Thermal Reactive Paste Sealing Compound
Price range: $183.73 through $4,243.79What is the Deacon 770-P Thermal Reactive Paste Sealing Compound?A heat curing paste sealant that is used in high temperature and high pressure applications. DEACON 770-P is specially designed to be a flange or thread sealant, 770-P can also be used as a dressing on any type of traditional fabricated gasket. Unaffected by thermal cycling, 770-P will not cement joints together or interfere with future repairs. In the presence of heat, 770-P will form a mechanical-type seal against steam, oils, solvents, hydrocarbons, and a variety of chemicals. Ideal for NPT pipe fittings.What are the specifications of the 770-P Thermal Reactive Paste Sealing Compound?Base Materials ResinService Rating 200°F (93°C) to 950°F (510°C) Up to 11,000 psi (758 Bar)Which Deacon 770-P Thermal Reactive Paste Sealing Compound do I order?770-P 10.3 oz. Caulk Tube (OL): part number 111-770-P (OL) TUBE770-P Pint (OL): part number 111-770-P (OL) PINT770-P Quart: part number 111-770-P QUART770-P Quart (OL): part number 111-770-P (OL) QUART770-P Gallon: part number 111-770-P GALLON770-P Gallon (OL): part number 111-770-P (OL) GALLON770-P 5 Gallon Pail (THIN): part number 111-770-P-THIN 5 GALLONWhat should you check before ordering the 770-P Thermal Reactive Paste Sealing Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 770-P Thermal Reactive Paste Sealing Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 8875 Thermal Reactive Paste Sealing Compound
Price range: $193.79 through $7,037.57What is the Deacon 8875 Thermal Reactive Paste Sealing Compound?Deacon 8875 is a fibrous sealant / refractory hybrid that does not become weak or brittle, even in the most extreme temperature applications. Rated up to 1800F (982C) and 5,000 PSI (345 Bar), Deacon 8875 will expand in the presence of heat, filling in any voids / imperfections on flange faces. It can be used with or without a gasket to seal superheated steam, NOX gases, catalyst, exhaust, or hot air in pipelines and containment vessels. Typical applications include hot blast valve flanges, gas turbines, access doors, incinerators, burner isolation valves, and ductwork. Deacon 8875 will not cement flanges together and is fully compatible with thermal cycling.What are the specifications of the 8875 Thermal Reactive Paste Sealing Compound?Base Materials ResinService Rating 500°F (260°C) to 1800°F (982°C) Up to 5,000 psi (345 Bar)Which Deacon 8875 Thermal Reactive Paste Sealing Compound do I order?8875-Thin 10.3 oz. Caulk Tube: part number 111-8875-T TUBE8875-Thin Pint: part number 111-8875-T PINT8875-Thin Quart: part number 111-8875-T QUART8875-Thin Gallon: part number 111-8875-T GALLON8875 5 Gallon Pail: part number 111-8875 5 GALLON8875-Thin 5 Gallon Pail: part number 111-8875-T 5 GALLON8875 Quart: part number 111-8875 QUART8875 Gallon: part number 111-8875 GALLONWhat should you check before ordering the 8875 Thermal Reactive Paste Sealing Compound?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 8875 Thermal Reactive Paste Sealing Compound from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 909 Injectable Sealant
Price range: $129.22 through $1,173.86What is the Deacon 909 Injectable Sealant?Heat curing, Very dense, Fibrous compound, Limited travel. Brown color. Below 550ºF (288ºC), speed up the cure by adding 103-P Accelerator. Shelf-life is 6 months in closed container. Refrigerated storage recommended.What are the specifications of the 909 Injectable Sealant?Service Rating 250ºF to 1000ºF (121ºC to 537ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" SticksWhat are the characteristics of the 909 Injectable Sealant?Excellent bridgingWhere is the 909 Injectable Sealant used?Flanges, Enclosures, High pressure steam, Condensate, Feed water, Hydrocarbons, Plugging holes.Which Deacon 909 Injectable Sealant do I order?J-Stick: part number 111-909 J-STICKPlug (Pack of 100): part number 111-909 PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 909 Injectable Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 909 Injectable Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon 990 Injectable Sealant
Price range: $130.61 through $1,308.99What is the Deacon 990 Injectable Sealant?Heat curing, thick fibrous injectable compound. Good travel. Below 550ºF (288ºC), speed up the cure by adding 103-P Accelerator (always use accelerator when sealing boiler feed water). Shelf life is 6 months in closed container. Refrigerated storage recommended.What are the specifications of the 990 Injectable Sealant?Service Rating 250ºF to 950ºF (121ºC to 510ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" Sticks, Bulk GallonsWhat are the characteristics of the 990 Injectable Sealant?Excellent bridging, cures with heat to a semi-flexible material that will still expand and contract with the jointWhere is the 990 Injectable Sealant used?Flanges, enclosures. For use on boiler feed water, condensate, high pressure steam, killing or plugging lines and valves (not for use as a valve packing)Which Deacon 990 Injectable Sealant do I order?J-Stick: part number 111-990 J-STICKGallon: part number 111-990 GALLONPlug (Pack of 100): part number 111-990 PLUGSome options here are sold by the pack and some as a single item, and the price follows the option: Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the 990 Injectable Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon 990 Injectable Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon CJ-429 & CJ-650 Injectable Sealant
Price range: $110.11 through $5,614.10What is the Deacon CJ-429 & CJ-650 Injectable Sealant?Heat curing, Sealant / refractory hybrid, Dense paste (gallons) or putty (extruded), Brown color, Heavy fiber concentration. Designed for applications where conventional sealants would become brittle and powder, because of extreme heat and temperature, this compound is un-surpassed. Shelf-life is 6 months in closed containers. Refrigerated storage recommended (extruded version only). CJ-650 is a thinner version of CJ-429, great for pumping from 5 Gallon Pails.What are the specifications of the CJ-429 & CJ-650 Injectable Sealant?Service Rating 600ºF to 1800ºF (315ºC to 982ºC)5/8" x 3" Plugs, J-Sticks, 7/8" x 6" Sticks, Bulk Gallons, 5 Gallon PailsWhat are the characteristics of the CJ-429 & CJ-650 Injectable Sealant?Excellent travel (even at elevated temps.)When fully cured, is not weak or brittle like ceramics or mortarsDesigned for very hot and dry conditionsWhere is the CJ-429 & CJ-650 Injectable Sealant used?Flanges, Enclosures, Catalyst, Flue gas, Hydrogen, Super-heated steam, Extreme heat, Hot Air.Which Deacon CJ-429 & CJ-650 Injectable Sealant do I order?CJ-429 J-Stick: part number 111-CJ-429 J-STICKCJ-429 Gallon: part number 111-CJ-429 GALLONCJ-429 Plug (Pack of 100): part number 111-CJ-429 PLUGCJ-650 Gallon: part number 111-CJ-650 GALLONCJ-650 5 Gallon Pail: part number 111-CJ-650 5 GALSome options here are sold by the pack and some as a single item, and the price follows the option: CJ-429 Plug (Pack of 100) is pack of 100. Every other option is one item.What should you check before ordering the CJ-429 & CJ-650 Injectable Sealant?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon CJ-429 & CJ-650 Injectable Sealant from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon Dry-Pak 24 Bulk Fiber Mixture
Price range: $322.75 through $3,519.49What is the Deacon Dry-Pak 24 Bulk Fiber Mixture?Combination of fibers, fillers and dry lubricants. Dark green, gray, and silver color. Shelf-life is unlimited. Store in closed containers. Dry-Pak 24 = Drier version of Dry-Pak 8 Dry-Pak JC = Finer grind of Dry-Pak 8 Dry-Pak JC1 = Finer grind of Dry-Pak 24What are the specifications of the Dry-Pak 24 Bulk Fiber Mixture?Service Rating Up to 950ºF (510ºC)One Gallon Pail (3 lbs.), 5 Gallon Pail (15 lbs.), 60 lb. BoxWhere is the Dry-Pak 24 Bulk Fiber Mixture used?Additive for thickening Deacon compounds on the job site or when additional bridging is desired.Which Deacon Dry-Pak 24 Bulk Fiber Mixture do I order?DP# 24 Gallon (3#): part number 111-DRY PAK-24 GALLONDP# 24 5 Gallon Pail (15#): part number 111-DRY PAK-24 5 GALLONDP# 24 Box (60#) (DRUM): part number 111-DRY PAK-24 DRUMWhat should you check before ordering the Dry-Pak 24 Bulk Fiber Mixture?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon Dry-Pak 24 Bulk Fiber Mixture from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon Dry-Pak 3 Powder / Light Fiber Mixture
$244.00What is the Deacon Dry-Pak 3 Powder / Light Fiber Mixture?Used to thicken sealant or coat sealant for handling. Light fiber and powder mixture (Dry Mix) - Also useful to coat sealant for easier handling, example CJ-429What are the specifications of the Dry-Pak 3 Powder / Light Fiber Mixture?Service Rating Up to 1200ºF (649ºC)1 Gallon pail (4 lbs), 5 Gallon Pail (20 lbs)Where is the Dry-Pak 3 Powder / Light Fiber Mixture used?Additive for bulking up Deacon compounds on the job site. When additional bridging is desired or to thicken a liquid sealer. example. 400, 409, 770-L. (can be mixed with 400 when using 4.5 gal. Pails and a volume pump.) - Shelf life is unlimited, store in closed containers.What is the part number for the Dry-Pak 3 Powder / Light Fiber Mixture?Deacon part number 111-DRY PAK-3 GALLON, DP# 3 Gallon (4#).What should you check before ordering the Dry-Pak 3 Powder / Light Fiber Mixture?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon Dry-Pak 3 Powder / Light Fiber Mixture from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon Dry-Pak 5 PTFE Powder / Fiber Mixture
$778.53What is the Deacon Dry-Pak 5 PTFE Powder / Fiber Mixture?100% PTFE fibers (various lengths) and fillers for added chemical resistance and bridging. Shelf-life is unlimited.What are the specifications of the Dry-Pak 5 PTFE Powder / Fiber Mixture?Service Rating Up to 500ºF (260ºC)One Gallon Pail (3 lbs.)What are the characteristics of the Dry-Pak 5 PTFE Powder / Fiber Mixture?Excellent chemical resistanceNot recommended for oxygen serviceWhere is the Dry-Pak 5 PTFE Powder / Fiber Mixture used?Used to bulk up Deacon compounds.What is the part number for the Dry-Pak 5 PTFE Powder / Fiber Mixture?Deacon part number 111-DRY PAK-5 GALLON, DP# 5 Gallon (3#).What should you check before ordering the Dry-Pak 5 PTFE Powder / Fiber Mixture?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon Dry-Pak 5 PTFE Powder / Fiber Mixture from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon Dry-Pak 6 High Temp Powder / Light Fiber Mixture
Price range: $310.54 through $3,830.16What is the Deacon Dry-Pak 6 High Temp Powder / Light Fiber Mixture?Used to thicken sealant. Dry mixture of high temp fibers / fillers. Similar to DRY-PAK 3 but contains carbon fiber. Shelf-life is unlimited.What are the specifications of the Dry-Pak 6 High Temp Powder / Light Fiber Mixture?Service Rating Up to 1500ºF (816ºC)1 Gallon Pail (3 lbs)Where is the Dry-Pak 6 High Temp Powder / Light Fiber Mixture used?Additive to bulk up Deacon sealant compounds and refractories. Recommended when additional bridging is desired.Which Deacon Dry-Pak 6 High Temp Powder / Light Fiber Mixture do I order?Gallon (3#): part number 111-DRY PAK-6 GALLONBox (25 KG) (DRUM): part number 111-DRY PAK-6 25 KG DRUMWhat should you check before ordering the Dry-Pak 6 High Temp Powder / Light Fiber Mixture?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon Dry-Pak 6 High Temp Powder / Light Fiber Mixture from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon Dry-Pak 8 Bulk Fiber Mixture
Price range: $322.70 through $3,695.42What is the Deacon Dry-Pak 8 Bulk Fiber Mixture?Combination of fibers, fillers and dry lubricants. Dark green, gray, and silver color. Shelf-life is unlimited. Store in closed containers.What are the specifications of the Dry-Pak 8 Bulk Fiber Mixture?Service Rating Up to 950ºF (510ºC)One Gallon Pail (3 lbs.), 5 Gallon Pail (15 lbs.), 60 lb. BoxWhere is the Dry-Pak 8 Bulk Fiber Mixture used?Additive for thickening Deacon compounds on the job site or when additional bridging is desired.Which Deacon Dry-Pak 8 Bulk Fiber Mixture do I order?DP# 8 Gallon (3#): part number 111-DRY PAK-8 GALLONDP# 8 5 Gallon Pail (15#): part number 111-DRY PAK-8 5 GALLONDP# 8 Box (60#) (DRUM): part number 111-DRY PAK-8 DRUMWhat should you check before ordering the Dry-Pak 8 Bulk Fiber Mixture?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon Dry-Pak 8 Bulk Fiber Mixture from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon Dry-Pak JC Bulk Fiber Mixture
$3,928.22What is the Deacon Dry-Pak JC Bulk Fiber Mixture?Combination of fibers, fillers and dry lubricants. Dark green, gray, and silver color. Shelf-life is unlimited. Store in closed containers. Dry-Pak 24 = Drier version of Dry-Pak 8 Dry-Pak JC = Finer grind of Dry-Pak 8 Dry-Pak JC1 = Finer grind of Dry-Pak 24What are the specifications of the Dry-Pak JC Bulk Fiber Mixture?Service Rating Up to 950ºF (510ºC)60 lb. BoxWhere is the Dry-Pak JC Bulk Fiber Mixture used?Additive for thickening Deacon compounds on the job site or when additional bridging is desired.What is the part number for the Dry-Pak JC Bulk Fiber Mixture?Deacon part number 111-DRY PAK-JC, DP JC Box (60#).What should you check before ordering the Dry-Pak JC Bulk Fiber Mixture?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon Dry-Pak JC Bulk Fiber Mixture from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time. -
Deacon Dry-Pak JC1 Bulk Fiber Mixture
Price range: $343.06 through $3,741.28What is the Deacon Dry-Pak JC1 Bulk Fiber Mixture?Combination of fibers, fillers and dry lubricants. Dark green, gray, and silver color. Shelf-life is unlimited. Store in closed containers. Dry-Pak 24 = Drier version of Dry-Pak 8 Dry-Pak JC = Finer grind of Dry-Pak 8 Dry-Pak JC1 = Finer grind of Dry-Pak 24What are the specifications of the Dry-Pak JC1 Bulk Fiber Mixture?Service Rating Up to 950ºF (510ºC)60 lb. BoxWhere is the Dry-Pak JC1 Bulk Fiber Mixture used?Additive for thickening Deacon compounds on the job site or when additional bridging is desired.Which Deacon Dry-Pak JC1 Bulk Fiber Mixture do I order?Gallon (3#): part number 111-DRY-PAK-JC1 GALLONBox (60#): part number 111-DRY PAK-JC1What should you check before ordering the Dry-Pak JC1 Bulk Fiber Mixture?[PROOF: FIELD OBSERVATION, COST COMPARISON OR FAILURE MODE FOR THIS PRODUCT, WITH DATE AND CONDITIONS]How do I order or get a quote?PE Energy supplies the Deacon Dry-Pak JC1 Bulk Fiber Mixture from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time.