3M

Maximize mobility, productivity and fall protection Maximize mobility, productivity and fall protection The 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline System Rebar/Shear Stud End Anchor Retrofit Kit allows you to transform your I-Beam Stanchion into an end-anchor stanchion for concrete rebar applications to help maximize usages for your equipment. Flexibility on the job, including a rebar/shear stud base, tie-back assembly, end anchor, and intermediate bracket, this end-anchor retrofit kit allows you to transform your I-beam stanchion to a concrete rebar end-anchor stanchion for customizable fall prevention and economy. Simple setup, this stanchion kit is easy to assemble with a top-mounted bolt and clamp adjustment system for safety and convenience. Made from durable materials, this safety equipment stands up to the rigors of the job. Reliable fall protection, 3M™ DBI-SALA® Horizontal Lifeline systems are precision-engineered and tested to meet OSHA regulations to help ensure that you and your team are protected on the job, day in and day out. Recommended industries Construction General Industrial SecuraSpan™ Extremely lightweight and portable, the SecuraSpan™ temporary horizontal lifeline system keeps your crew safe and agile, so they can get the job done with confidence. Each system incorporates a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can reach up to 60 ft. (18.3 m) and total system length can be configured to run indefinitely for ultimate jobsite flexibility. Temporary Horizontal Lifelines These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number of users, and rigorously tested to meet industry standards. Permanent Horizontal Lifelines Our permanent horizontal lifeline (HLL) solutions are designed to work for your worksite, providing continuous fall protection without conflicting with other safety systems. They are available pre-engineered or customized based on your application needs. Elevating safety to new heights With its history of innovation and excellence, 3M Personal Safety Division offers its customers the quality products, expertise and service of the trusted 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection brands. With 3M Fall Protection equipment, you can help elevate your employees' safety and comfort to new heights. Anchorages A secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to support the intended loads and provide a sufficient factor of safety for fall arrest. Body support Harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. Connectors Self-retracting lifelines or shock-absorbing lanyards connect a worker's harness to the anchorage. Descent and rescue devices Used to raise or lower a fallen injured worker to safety or retrieve him from a confined space. Education We offer a variety of training and consultative services to fit your needs. Fall protection for tools Helps make work environments safer and more productive by reducing dropped object incidents.   Details Highlights Includes a rebar/shear stud base, tie-back assembly, end anchor, and intermediate bracket; stanchions and lifelines are sold separately Compatible with single-span and multi-span lifeline configurations Single-span systems hold up to 2 workers; multi-span systems hold up to 6 workers Horizontal lifelines offer workers exceptional mobility on the job Portable design is durable, yet lightweight, for easy transport This safety equipment is intended for use with additional personal protective equipment (PPE) Recommended for use in multiple industries including construction, facilities, general manufacturing, heavy infrastructure, and more Zinc-plated steel materials are corrosion-resistant and stand up to harsh environments The 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline System Rebar/Shear Stud End Anchor Retrofit Kit allows you to transform your I-Beam Stanchion into an end-anchor stanchion for concrete rebar applications to help maximize usages for your equipment. Flexibility on the job Including a rebar/shear stud base, tie-back assembly, end anchor, and intermediate bracket, this end-anchor retrofit kit allows you to transform your I-beam stanchion to a concrete rebar end-anchor stanchion for customizable fall prevention and economy. Simple setup This stanchion kit is easy to assemble with a top-mounted bolt and clamp adjustment system for safety and convenience. Made from durable materials, this safety equipment stands up to the rigors of the job. Reliable fall protection 3M™ DBI-SALA® Horizontal Lifeline systems are precision-engineered and tested to meet OSHA regulations to help ensure that you and your team are protected on the job, day in and day out. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Per Span, 6 Total Product Series SecuraSpan™ Product Type Concrete Recommended Industry Construction, Transportation Span Type Single or Multi-Span Weight (Imperial) 11 lb. Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg

Maximize mobility, productivity and fall protection Engineered to configure your own Horizontal Lifeline System, our 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline System I-Beam Stanchion with Base is easy to install and provides the reliable performance and flexibility you expect from 3M DBI-SALA. Versatility is key, designed to be used with your 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline System, this I-beam stanchion and base allows you to create custom horizontal fall protection based on your needs. They're compatible with a wide range of steel beams for ultimate versatility from one job to the next. Plus, our horizontal lifeline systems allow for your workers to be tied off at all times. Simple setup, our fall-arrest stanchions and bases can be installed with no special tools—the bases consist of a clamp and a large wing nut. Engineered from durable zinc-plated steel, this fall-prevention equipment endures even in harsh environments and it can be configured into single and multi-span systems. Reliable fall protection, 3M™ DBI-SALA® Horizontal Lifeline systems are precision-engineered and tested to meet OSHA regulations to help ensure that you and your team are protected on the job, day in and day out. Recommended industries Construction General Industrial Oil & Gas Transportation Temporary Horizontal Lifelines These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number of users, and rigorously tested to meet industry standards. Permanent Horizontal Lifelines Our permanent horizontal lifeline (HLL) solutions are designed to work for your worksite, providing continuous fall protection without conflicting with other safety systems. They are available pre-engineered or customized based on your application needs. Elevating safety to new heights With its history of innovation and excellence, 3M Personal Safety Division offers its customers the quality products, expertise and service of the trusted 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection brands. With 3M Fall Protection equipment, you can help elevate your employees' safety and comfort to new heights. Anchorages A secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to support the intended loads and provide a sufficient factor of safety for fall arrest. Body support Harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. Connectors Self-retracting lifelines or shock-absorbing lanyards connect a worker's harness to the anchorage. Descent and rescue devices Used to raise or lower a fallen injured worker to safety or retrieve him from a confined space. Education We offer a variety of training and consultative services to fit your needs. Fall protection for tools Helps make work environments safer and more productive by reducing dropped object incidents. Details Highlights Fits 6 in. to 12 in. (15.2-30.5 cm) wide flange up to 2-1/4" (5.7 cm) thick Various lengths and individual components are available Equipped with RFID Single and multi-span indefinite length system configurations Pass-thru 100% tie-off protection Simple clamp and wing nut installation Flexible system capacity Durable, lightweight and portable construction Top mounted adjustment system Single and multi-span indefinite length system configurations 3M™ DBI-SALA® Temporary Cable Horizontal I-Beam HLL Stanchion with I-beam base to configure your own horizontal lifeline system Extremely lightweight and portable, these systems incorporate a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can be up to 60 ft. (18.3 m) and with the optional bypass brackets, the system can be configured to run indefinitely for ultimate jobsite flexibility. You can always depend on our horizontal safety systems for mobility and fall protection when working at height. That’s why safety engineers and site directors choose DBI-SALA® horizontal lifelines. We offer the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and rigorously tested to meet regulations. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped Yes For Use With 3M™ DBI-SALA® SecuraSpan™ I-Beam System Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Per Span, 6 Total Net Weight (Metric) 17.2 kg Product Series SecuraSpan™ Product Type I-Beam HLL Stanchion with Base Recommended Industry Construction, General Industrial, Oil & Gas, Transportation Span Type Single or Multi-Span Weight (Imperial) 38 lb. Weight (Metric) 17.2 kg Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg

For trusted fall protection Engineered to be used with your 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline Perpendicular I-beam system, this bypass bracket kit allows you to convert your anchor stanchion (7400047) into a pass-through stanchion to lengthen and customize your horizontal lifeline system. Our intermediate brackets come with all the hardware you need to bolt to your existing 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline Perpendicular I-beam stanchions so there's no guesswork involved. Engineered from durable materials, these brackets endure even in harsh environments. Reliable fall protection, 3M™ DBI-SALA HLL systems are precision-engineered and tested to meet OSHA regulations and help ensure that you and your team are protected on the job, day in and day out. Recommended industries Construction Oil & Gas Temporary Horizontal Lifelines These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number of users, and rigorously tested to meet industry standards. Permanent Horizontal Lifelines Our permanent horizontal lifeline (HLL) solutions are designed to work for your worksite, providing continuous fall protection without conflicting with other safety systems. They are available pre-engineered or customized based on your application needs. Elevating safety to new heights With its history of innovation and excellence, 3M Personal Safety Division offers its customers the quality products, expertise and service of the trusted 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection brands. With 3M Fall Protection equipment, you can help elevate your employees' safety and comfort to new heights. Anchorages A secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to support the intended loads and provide a sufficient factor of safety for fall arrest. Body support Harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. Connectors Self-retracting lifelines or shock-absorbing lanyards connect a worker's harness to the anchorage. Descent and rescue devices Used to raise or lower a fallen injured worker to safety or retrieve him from a confined space. Education We offer a variety of training and consultative services to fit your needs. Fall protection for tools Helps make work environments safer and more productive by reducing dropped object incidents.   Details Highlights Hardware kit included to bolt to existing horizontal I-beam stanchion Various lengths and individual components are available Pass-thru 100% tie-off protection Lightweight and portable design Extremely durable construction Various lengths and individual components are available 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline I-Beam HLL Stanchion Intermediate Bracket or perpendicular bypass bracket kit for SecuraSpan™ I-beam stanchion. Lightweight and portable, these systems incorporate a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can be up to 60 ft. (18.3 m) and with the optional bypass brackets, the system can be configured to run indefinitely for ultimate jobsite flexibility. 3M offers the broadest selection, as well as significant advantages in safety and productivity. A horizontal lifeline may appear to be a basic line strung between two anchors, but it is not. It is critical to choose a system that has been precision engineered and tested. These systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No For Use With 3M™ DBI-SALA® SecuraSpan™ I-Beam System Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Per Span, 6 Total Net Weight (Metric) 0.9 kg Product Series SecuraSpan™ Product Type Perpendicular I-Beam HLL Stanchion Intermediate Bracket Recommended Industry Construction, Oil & Gas Span Type Single or Multi-Span Weight (Imperial) 2 lb. Weight (Metric) 0.9 kg Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg

Maximize mobility, productivity and fall protection A fall protection solution for every job site Designed for decking, our 3M™ DBI-SALA® Pour-in-Place Horizontal Lifeline System allows you to tie-off overhead to help keep you and your crew safe on the job. Just one part of this fall-arrest system, this stanchion and concrete sleeve allow you to transform your single-span system into a multi-span system. This fall-prevention equipment is also compatible with fasten-in-place systems. Versatility counts Every job site is different. 3M DBI-SALA understands that easy-to-install, customizable fall-protection equipment promotes productivity on the job site. This stanchion features removable screw-in handles for easy set-up that allows you to create the HLL system that works best for your crew when used with the appropriate stanchions, concrete sleeves, and lifeline cable assembly. Reliable fall protection 3M™ DBI-SALA® Horizontal Lifeline systems are precision-engineered and tested to meet OSHA regulations to help ensure that you and your team are protected on the job, day in and day out. Recommended industries Construction General Industrial Oil & Gas Utilities SecuraSpan™ Extremely lightweight and portable, the SecuraSpan™ temporary horizontal lifeline system keeps your crew safe and agile, so they can get the job done with confidence. Each system incorporates a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can reach up to 60 ft. (18.3 m) and total system length can be configured to run indefinitely for ultimate jobsite flexibility. Temporary Horizontal Lifelines These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number of users, and rigorously tested to meet industry standards. Permanent Horizontal Lifelines Our permanent horizontal lifeline (HLL) solutions are designed to work for your worksite, providing continuous fall protection without conflicting with other safety systems. They are available pre-engineered or customized based on your application needs. Elevating safety to new heights With its history of innovation and excellence, 3M Personal Safety Division offers its customers the quality products, expertise and service of the trusted 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection brands. With 3M Fall Protection equipment, you can help elevate your employees' safety and comfort to new heights. Anchorages A secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to support the intended loads and provide a sufficient factor of safety for fall arrest. Body support Harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. Connectors Self-retracting lifelines or shock-absorbing lanyards connect a worker's harness to the anchorage. Descent and rescue devices Used to raise or lower a fallen injured worker to safety or retrieve him from a confined space. Education We offer a variety of training and consultative services to fit your needs. Fall protection for tools Helps make work environments safer and more productive by reducing dropped object incidents.   Details Highlights Durable materials stand up to harsh conditions Portable design is durable, yet lightweight, for easy transport Compatible with single-span and multi-span lifeline configurations Equipped with RFID identification tag for convenient equipment tracking Designed for use in Pour-in-Place Post Horizontal Lifeline Systems and fasten-in-place systems This safety equipment is intended for use with additional personal protective equipment (PPE) Meets OSHA requirements Single-span systems hold up to 2 workers; multi-span systems hold up to 6 workers Recommended for use in multiple industries including construction, facilities, general manufacturing, heavy infrastructure, and more 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline Pour-in-Place/Fasten-in-Place HLL Stanchion is the one to choose when you're using our 3M™ DBI-SALA® Pour-in-Place Horizontal Lifeline system. This stanchion post and included concrete sleeve allow you to customize your fall-protection system and offer exceptional durability and performance for overhead tie-off applications. This safety product is also compatible with fasten-in-place systems. A fall protection solution for every job site Designed for decking, our 3M™ DBI-SALA® Pour-in-Place Horizontal Lifeline System allows you to tie-off overhead to help keep you and your crew safe on the job. Just one part of this fall-arrest system, this stanchion and concrete sleeve allow you to transform your single-span system into a multi-span system. This fall-prevention equipment is also compatible with fasten-in-place systems. Versatility counts Every job site is different. 3M DBI-SALA understands that easy-to-install, customizable fall-protection equipment promotes productivity on the job site. This stanchion features removable screw-in handles for easy set-up that allows you to create the HLL system that works best for your crew when used with the appropriate stanchions, concrete sleeves, and lifeline cable assembly. Reliable fall protection 3M™ DBI-SALA® Horizontal Lifeline systems are precision-engineered and tested to meet OSHA regulations to help ensure that you and your team are protected on the job, day in and day out. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped Yes For Use With 3M™ DBI-SALA® SecuraSpan™ Pour-in-Place/Fasten-in-Place HLL system Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Per Span, 6 Total Net Weight (Metric) 25.4 kg Product Series SecuraSpan™ Fasten-in-Place, SecuraSpan™ Pour-in-Place, SecuraSpan™ Pour/Fasten-in-Place Product Type Pour-in-Place/Fasten-in-Place HLL Stanchion Recommended Industry Construction, General Industrial, Oil & Gas, Utilities Span Type Single or Multi-Span Specifications Met OSHA 1910.66, OSHA 1926.502 Weight (Imperial) 56 lb. Weight (Metric) 25.4 kg Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg

Maximize mobility, productivity and fall protection Engineered so that you can create your own horizontal fall-protection system, the 3M™ DBI-SALA®Temporary Cable Horizontal Lifeline System Rebar/Shear Stud Stanchion with Base allow you to configure intermediate or end anchors for flexibility on the job. Versatility on the job, including a stanchion, a concrete rebar/shear stud base, and intermediate and end-anchor brackets, the 3M™ DBI-SALA®Temporary Cable Horizontal Lifeline System Rebar/Shear Stud Stanchion with Base allows you to create custom fall protection wherever the job takes you. Single-span systems hold up to two workers at a time, while multi-span configurations accommodate up to six workers. Simple setup, designed to help get you and your crew compliant and working on the job site, this concrete rebar stanchion and base can be installed with no special tools and features top-mounted bolt and clamp hardware for safety and easy adjustments. Reliable fall protection, 3M™ DBI-SALA® HLL systems are precision-engineered and tested to meet OSHA regulations and help ensure that you and your team are protected on the job, day in and day out. Recommended industries Construction Transportation SecuraSpan™ Extremely lightweight and portable, the SecuraSpan™ temporary horizontal lifeline system keeps your crew safe and agile, so they can get the job done with confidence. Each system incorporates a modular, multi-base design that accommodates a wide range of steel and concrete beams. Spans can reach up to 60 ft. (18.3 m) and total system length can be configured to run indefinitely for ultimate jobsite flexibility. Temporary Horizontal Lifelines These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number of users, and rigorously tested to meet industry standards. Permanent Horizontal Lifelines Our permanent horizontal lifeline (HLL) solutions are designed to work for your worksite, providing continuous fall protection without conflicting with other safety systems. They are available pre-engineered or customized based on your application needs. Elevating safety to new heights With its history of innovation and excellence, 3M Personal Safety Division offers its customers the quality products, expertise and service of the trusted 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection brands. With 3M Fall Protection equipment, you can help elevate your employees' safety and comfort to new heights. Anchorages A secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to support the intended loads and provide a sufficient factor of safety for fall arrest. Body support Harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. Connectors Self-retracting lifelines or shock-absorbing lanyards connect a worker's harness to the anchorage. Descent and rescue devices Used to raise or lower a fallen injured worker to safety or retrieve him from a confined space. Education We offer a variety of training and consultative services to fit your needs. Fall protection for tools Helps make work environments safer and more productive by reducing dropped object incidents.   Details Highlights Zinc-plated steel materials are and stand up to harsh environments Single-span systems hold up to 2 workers; multi-span systems hold up to 6 workers Top-mounted bolt and clamp adjustment system for easy installation, safety, and convenience Portable design is durable, yet lightweight, for easy transport Equipped with RFID identification tag for convenient equipment tracking This safety equipment is intended for use with additional personal protective equipment (PPE) Recommended for use in multiple industries including construction, facilities, power plants, general manufacturing, heavy infrastructure, and more 3M™ DBI-SALA® Temporary Cable Horizontal Lifeline Rebar/Shear Stud HLL Stanchion with Base is engineered so that you can create your own horizontal fall-protection system, the 3M™ DBI-SALA®Temporary Cable Horizontal Lifeline System Rebar/Shear Stud Stanchion with Base allow you to configure intermediate or end anchors for flexibility on the job. Versatility on the job Including a stanchion, a concrete rebar/shear stud base, and intermediate and end-anchor brackets, the 3M™ DBI-SALA®Temporary Cable Horizontal Lifeline System Rebar/Shear Stud Stanchion with Base allows you to create custom fall protection wherever the job takes you. Single-span systems hold up to two workers at a time, while multi-span configurations accommodate up to six workers. Simple setup Designed to help get you and your crew compliant and working on the job site, this concrete rebar stanchion and base can be installed with no special tools and features top-mounted bolt and clamp hardware for safety and easy adjustments. Reliable fall protection 3M™ DBI-SALA® HLL systems are precision-engineered and tested to meet OSHA regulations and help ensure that you and your team are protected on the job, day in and day out. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped Yes For Use With 3M™ DBI-SALA® SecuraSpan™ Rebar/Shear Stud HLL System Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Per Span, 6 Total Net Weight (Metric) 17.3 kg Product Series SecuraSpan™ Product Type Rebar/Shear Stud HLL Stanchion with Base Recommended Industry Construction, Transportation Span Type Single or Multi-Span Weight (Imperial) 38 lb. Weight (Metric) 17.3 kg Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg

Versatility on the job The 3M™ DBI-SALA® Metal Energy Absorber Kit with two shackles helps keep your crew safe, productive, and more comfortable on the job by reducing fall-arrest forces to a safe level, minimizing the needed fall clearance, and protecting the structure. Reliable fall protection, 3M™ DBI-SALA HLL systems are precision-engineered and tested to meet OSHA regulations and help ensure that you and your team are protected on the job, day in and day out. Recommended industries Construction General Industrial Oil & Gas Transportation Temporary Horizontal Lifelines These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number of users, and rigorously tested to meet industry standards. Permanent Horizontal Lifelines Our permanent horizontal lifeline (HLL) solutions are designed to work for your worksite, providing continuous fall protection without conflicting with other safety systems. They are available pre-engineered or customized based on your application needs. Elevating safety to new heights With its history of innovation and excellence, 3M Personal Safety Division offers its customers the quality products, expertise and service of the trusted 3M™ DBI-SALA® and 3M™ Protecta® Fall Protection brands. With 3M Fall Protection equipment, you can help elevate your employees' safety and comfort to new heights. Anchorages A secure point of attachment. Anchorage connectors vary by industry, job, type of installation and structure. They must be able to support the intended loads and provide a sufficient factor of safety for fall arrest. Body support Harnesses distribute fall forces over the upper thighs, pelvis, chest and shoulders. They provide a connection point on the worker for the personal fall arrest system. Connectors Self-retracting lifelines or shock-absorbing lanyards connect a worker's harness to the anchorage. Descent and rescue devices Used to raise or lower a fallen injured worker to safety or retrieve him from a confined space. Education We offer a variety of training and consultative services to fit your needs. Fall protection for tools Helps make work environments safer and more productive by reducing dropped object incidents. Details Highlights For use with horizontal lifeline system Metal energy absorber limits fall arrest forces Durable, lightweight and portable design Configure up to 60 ft. (18.3m) length system with one device or 100 ft. (30.5m) with two Lightweight and portable design Extremely durable construction Mounting kit includes 3 shackles and fasteners 3M™ DBI-SALA® Metal Energy Absorber Kit with two shackles, fasteners and turnbuckle tensioner. 3M added safety and helped to take the guesswork out of putting together your own horizontal lifeline system. Can you answer the following questions? How much clearance do I need? How will lifeline sag and span distance affect the safety of my system? What forces will be generated on my end anchors? Do my anchorage connectors and support structure have sufficient strength? Now you can. This revolutionary new shock absorber featured on our lifeline systems is also available separately. In situations where a qualified person understands the requirements needed, the metal energy absorber can be attached to help absorb additional energy in the case of a fall. We offer the broadest selection, as well as significant advantages in safety and productivity. Typical properties Brands DBI-SALA® Case Quantity 1 Connected Safety ID Equipped No Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers 2 Product Type Energy Absorber Kit Recommended Industry Construction, General Industrial, Oil & Gas, Transportation Span Type Single-Span Specifications Met OSHA 1910.66, OSHA 1926.502 Weight (Imperial) 4.6 lb. Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg

Details Highlights Stanchions, lifelines, bases, and Metal Energy Energy Absorbers all sold separately Constructed of durable materials Recommended for use in multiple industries including construction, facilities, power plants, general manufacturing, heavy infrastructure, and more Single-span systems hold up to 2 workers; multi-span systems hold up to 6 workers Compatible with galvanized and stainless steel lifeline cables This safety equipment is designed to work with additional personal protective equipment (PPE) Portable design is durable, yet lightweight, for easy transport Intended for use in a temporary horizontal lifeline system Metal Energy Absorbers help protect the structure, and minimize needed fall clearance The 3M™ DBI-SALA® Wedge Grip Horizontal Lifeline Termination Device provides a reliable connection for your lifeline and is designed to work in tandem with the Metal Energy Absorber. One part or your fall-protection plan Made from durable materials, this safety equipment stands up to harsh conditions and provides a strong connection for your lifeline. This lifeline termination device is designed for use with our Metal Energy shock absorber that helps reduce the impact of force on a worker if he or she is involved in a fall. Versatility on the job At 3M DBI-SALA, we understand the importance of flexibility. That's why we engineered this horizontal lifeline wedge grip to be compatible with your existing HLL system or one of ours, such as the 3M™ DBI-SALA® SecuraSpan™ I-Beam Horizontal Lifeline System. Reliable fall protection Typical properties Brands Rollgliss™ Technical Rescue Case Quantity 1 Connected Safety ID Equipped No For Use With Sayfline & SecuraSpan Replacement Lifelines Install Type Temporary/Portable Lifeline Material Order separately Maximum Number of Workers None Net Weight (Metric) 2 kg Product Type Wedge Grip Horizontal Lifeline Termination Device Recommended Industry Construction, General Industrial, Oil & Gas, Transportation Span Type Single-Span Weight (Imperial) 4.4 lb. Weight (Metric) 2 kg Weight Capacity 310 lbs. (141 kg) Weight Capacity (Imperial) 310 lb. Weight Capacity (Metric) 141 kg