Headsets
Showing 46–90 of 95 results
-
11-05427 – DAVID CLARK H10-66XL DUAL IMPEDANCE ENC HEADSET
ENC technology and enhanced comfort features. Significantly reduces low frequency noise and provides increased attenuation with ENC activated. Coil cord with single plug connects the battery-powered module to aircraft radio or intercom. Battery Power Module - One 9 volt battery for up to 25 hours of operation New Comfort gel, undercut ear seals Hi-Low Impedance Switch. Increased attenuation with ENC activated, additional 17-22dB. Pilot Selectable Automatic-Shut Off Feature Included. Patented flex/wire boom with M-101 Dynamic Microphone. Volume control with detent settings adjusts to preferred listening level. Weight (without cord assembly): 24 oz. Coiled cord terminates into a U-174/U plug. -
11-05428 – DAVID CLARK H10-76XL PORTABLE LOW IMPEDANCE ENC HEADSET
The H10-76XL adds electronic noise cancelation to the popular H10-76. Low impedance and U-174 plug is specific to most Military aircraft. Soft, double foam headpad Undercut gel ear seals Advanced ENC technology provides 17 - 22 additional dB beyond already superior passive noise attenuation Versatility of portable battery powered or permanent mount options using the same headset Headband custom adjustment for perfect fit Dynamic, noise-canceling M-87 microphone for clear, crisp communications Meets MIL-26542/2 (USAF) specifications. Ideal for aircraft requiring a low impedance microphone Microphone terminal impedance nominally 5 ohms "FAIL-SAFE" operation. Electronically independent earphone drivers permit uninterrupted communication should ENC or its power source fail Coiled cord terminates into a U-174/U plug. -
11-05429 – DAVID CLARK H10-76XP PANEL-MOUNT LOW IMPEDANCE ENC HEADSET
The H10-76XP Panel-Mount Low Impedance ENC Headset features ENC technology and designed for use with low impedance systems. Same as H10-76XL but with permanent panel-mount module for utilizing the aircraft’s power H10-76XP Panel Mount Module New super soft, double foam headpad New comfort gel, undercut ear seals Advanced ENC technology provides 17 - 22 additional dB beyond already superior passive noise attenuation Versatility of portable battery powered or permanent mount options using the same headset Headband custom adjustment for perfect fit Dynamic, noise-canceling M-87 microphone for clear, crisp communications. Meets MIL-26542/2 (USAF) specifications. Ideal for aircraft requiring a low impedance microphone Microphone terminal impedance nominally 5 ohms "FAIL-SAFE" operation. Electronically independent earphone drivers permit uninterrupted communication should ENC or its power source fail Coiled cord terminates into a U-174/U plug. -
11-05542 – 40998G-05 ADAPTER CORD FOR DAVID CLARK X11P HEADSET
Designed for wiring into existing avionics built-in intercoms, radios, etc. -
11-05547 – DAVID CLARK X11P 6 PIN LEMO TO DUAL GA ADAPTER 40998G-02
Optional adapter cord with standard aviation plugs allowing use of the X11P when flying in other than primary aircraft. -
11-05548 – 40998G-03 ADAPTER CORD FOR DAVID CLARK X11P HEADSET
Optional adapter cord allowing use of the X11P in aircraft already equipped with David Clark ENC "XP" Series panel mount module. -
11-05948 – DAVID CLARK H10-60 TO DUAL GA 5FT STRAIGHT CABLE
Increases the versatility of the H10-60 headset. Plugs into the dome connector. -
11-05949 – COIL CORD (5 FOOT) WITH PJ-068 & PJ-055 PLUGS
Increases the versatility of the H10-60 headset. Plugs into the dome connector. -
11-05950 – DAVID CLARK H10-60H TO HELICOPTER 5 FT COIL CABLE
Increases the versatility of the H10-60 headset. Plugs into the dome connector. -
11-05952 – DAVID CLARK DUAL GA TO U75/U ADAPTER 18253G-01
Converts PJ-068 & PJ-055 to U-75/U -
11-05953 – DAVID CLARK U75/U TO DUAL GA ADAPTER 18253G-02
Converts U-75/U to M642/5-1 (PJ068) and M642/4-1 (PJ055) -
11-05954 – DAVID CLARK U75/U TO HELICOPTER ADAPTER 18253G-03
Converts U-75/U to U-174/U -
11-05955 – DAVID CLARK HELICOPTER TO U75/U ADAPTER 18253G-04
Converts U-174/U or U-93A/U to U-75/U -
11-05956 – DAVID CLARK HELICOPTER TO DUAL GA ADAPTER 18253G-05
Converts U-174/U or U-93A/U to M642/5-1 (PJ068) and M642/4-1 (PJ055). Also converts the Helicopter Single Plug to a Dual Plug configuration for Fixed Wing flying. General Aviation applications only. -
11-05957 – DAVID CLARK DUAL GA TO HELICOPTER ADAPTER 18253G-06
Converts PJ-068 & PJ-055 to U-174/U. Also converts the Fixed Wing Dual Plug configuration to a Single Plug for Helicopter flying. General Aviation Applications only. -
11-05958 – DAVID CLARK NATO TO DUAL GA ADAPTER 18253G-17
Converts NATO to PJ-068 & PJ-055 -
11-05959 – DAVID CLARK DUAL GA TO NATO ADAPTER 18253G-16
Converts PJ-068 & PJ-055 to NATO -
11-05960 – DAVID CLARK HELICOPTER TO NATO ADAPTER 18253G-18
Converts U-174/U to NATO -
11-05961 – DAVID CLARK NATO TO HELICOPTER ADAPTER 18253G-19
Converts NATO to U-174/U -
11-07116 – DAVID CLARK GROUND SUPPORT HEADSET – H7010
Ground Support Headsets are designed to facilitate communication when background noise or distance makes it extremely difficult to communicate. During ground-support operations, communication is critical to ensure the safety of everyone in the vicinity as well as the protection of the aircraft from accidental damage. Model H7010 Noise Attenuating Headset M-101 Noise-Cancelling Microphone 30-inch straight cord with U174/U plug Noise-shielded microphone (muff) with On/Off switch Soft headpad and ear seals guarantee exceptional comfort Snap-fastened nylon straps secure microphone muff to mouth Corrosion-resistant, chrome plated headpad/stirrup assembly Extremely durable and reliable NRR 26dB -
11-07117 – DAVID CLARK GROUND SUPPORT HEADSET – H-133C/AIC
Ground Support Headsets are designed to facilitate communication when background noise or distance makes it extremely difficult to communicate. During ground-support operations, communication is critical to ensure the safety of everyone in the vicinity as well as the protection of the aircraft from accidental damage. Model H-133C/AIC Noise Attenuating Headset M-101/AIC Noise-Cancelling Microphone 30-inch straight cord with U93A/U plug Noise-shielded microphone (muff) Soft headpad and ear seals guarantee exceptional comfort Snap-fastened nylon straps secure microphone muff to mouth Corrosion-resistant, chrome plated headpad/stirrup assembly Heavy duty and extremely reliable For noise levels to 140dB -
11-08282 – DAVID CLARK MICROPHONE M-7 D/C
This Electret Microphone is a noise canceling type designed to operate in place of carbon and amplified dynamic microphones. It will not operate in circuits that do not supply a DC bias voltage. Most modern aviation communications equipment do supply this required voltage. If unsure, consult with your radio technical manual or with your local avionics shop. It is intended for use with wire booms. -
11-08283 – DAVID CLARK MILITARY LOW TO DUAL GA HIGH IMPEDANCE ADAPTER
40880G-01 Headset Adapter allows a low impedance (Military Type), single plug, headset to be used in a general aviation aircraft. U92 A/U socket to M642/4-1 (PJ055) and M642/5-1 (PJ068) -
11-09201 – PROTECTOR – FITS M-7A MICROPHONES
Improves communications by reducing wind and ambient cockpit noise while transmitting. Check the Model of your microphone for correct size. -
11-09205 – DAVID CLARK HEARING PROTECTOR
The David Clark Deluxe Model Hearing Protector provides maximum noise attenuation and optimum comfort. Features urethane covered ear seals, soft foam cushioned headband, military quality materials, finish and workmanship. -
11-09225 – DAVID CLARK M-1A AMPLIFIED MICROPHONE
CALL FOR SPECIAL PRICE! The M-1Amplified Dynamic headset microphone is a noise canceling type designed to operate in place of carbon and amplified dynamic microphones. -
11-09230 – DAVID CLARK M-I/DC AMPLIFIED MICROPHONE
The M-1/DC Amplified Dynamic headset microphone is a noise canceling type designed to operate in place of carbon and amplified dynamic microphones. -
11-09262 – DAVID CLARK MICROPHONE PROTECTOR
Microphone protector improves communications by reducing wind and ambient cockpit noise while transmitting. -
11-09263 – DAVID CLARK X11 MICROPHONE
The X11's unamplified electret microphone is an M77, noise cancelling microphone. It will operate only in circuits that supply an appropriate D.C. bias voltage through the proper range of DC biasing resistances. -
11-11524 – USED DAVID CLARK H10-13H HELICOPTER HEADSET
The H10-13H Headset is the H10-13.4 headset for helicopter pilots, also with a coiled cord and a single plug. The H10-13H headset provides David Clark quality without the hot spots, clamping, or weight discomfort. It features a certified noise reduction rating of 23 dB and weighs only 16.5 oz. It features M-7A noise cancelling electret mic, and low profile volume controls with detent settings. The Super-Soft, Double-Foam Headpad will improve the comfort and “wearability” of all H10-series headsets. It is wider and more tapered with 60% more surface area in contact with the head to dissipate headset weight. Its unique center “hinge” actually lets the headpad “breathe” for greater comfort. It also eliminates irritation while wearing button-top baseball caps. The new Comfort-Gel Ear Seals have a patented undercut design and are 26% lighter and allow 30% more interior room for your ears, making for a quieter, more comfortable flight. -
11-11599 – DAVID CLARK PRO HEADSET – DUAL GA PLUGS
The DC PRO passive headset incorporates the same outstanding comfort features as the DC PRO-X design (excluding Hybrid Electronic Noise Cancellation and Bluetooth wireless technology). Note: As with any passive headset featuring a supra-aural design, the DC PRO is not recommended for fixed wing, piston engine aircraft. This DC PRO was designed for use in the commercial/transport jet aircraft market. -
11-11603 – DAVID CLARK PRO X ANR HEADSET – DUAL GA PLUGS
Leading edge technology and sleek, supra aural design puts the DC PRO-X a generation ahead of any other aviation headset in its class. The perfect combination of comfort and performance. From its feather-light yet extremely rugged magnesium alloy headband and suspension system, to its best-in-class Hybrid noise cancelling technology and Bluetooth compatibility, you simply won't find a better headset or a better value. Compact, multi-function control module puts a variety of operational functions right at your fingertips. Roll over numerals surrounding module at right to view features. Hybrid Electronic Noise Cancelling features not one, but two microphones, one located on the exterior of the dome and isolated from the speaker (feed-forward) and a second internal microphone placed near the speaker (feed-back). The exterior microphone acquires the noise before it gets to the ear canal. Working in concert with the internal microphone, the signals are then inverted to produce a reverse, anti-noise signal, resulting in unsurpassed active noise reduction performance. -
11-11950 – DAVID CLARK H10-13Y YOUTH HEADSET CONVERSION
The H10-13.4 youth conversion kit assures you that your child will not outgrow his or her headset. When your child grows too large for the H10-13Y headset, purchase and use this kit to allow them to continue using the headset. -
11-12457 – DAVID CLARK PRO X EAR SEALS
Plush, supra-aural design with slow-recovery foam cradles your ears in comfort. Eliminates hot spots and conforms perfectly to the shape of your ear for a personalized fit. -
11-12458 – DAVID CLARK PRO X MIC PROTECTOR
Improves communications by reducing wind and ambient cockpit noise while transmitting. For use with DC PRO/DC PRO-X headsets featuring M-55 microphones. -
11-12489 – DAVID CLARK 10A / 10AS HEARING PROTECTOR
Over-the-head Style Standard Hearing Protector Sets the standard for Over-the-Head hearing protection. A soft foam headpad and wide foam filled ear seals provide added comfort while the adjustable headband assures a perfect fit. NRR: 23dB -
11-12490 – DAVID CLARK BOOM GUIDE KIT STANDARD MOUNT
This item is spare part for the these David Clark Items -
11-12493 – DAVID CLARK DOME FILTER
This item is spare part for the these David Clark Items -
11-12496 – DAVID CLARK FILTER
This item is spare part for the these David Clark Items: -
11-12497 – DAVID CLARK HEADPAD SHEEPSKIN
Experience the soft feel of sheepskin with this replacement headpad that ensures long-term flying comfort. Not for use with H20-Series Headsets. -
11-12538 – DAVID CLARK PRO XP ANR HEADSET – 6 PIN PANEL PLUG
Hybrid Electronic Noise Cancellation - Provides best-in-class active noise cancellation. Bluetooth® Wireless Technology - Seamless integration for connection to cell phones, MP3, tablets or other personal devices Dual Voice Coil Earphone Drivers Provide Fail-Safe Operation - Ensures full communication in the event of battery loss or system failure Digital Signal Processing (DSP) Technology - Provides high fidelity audio for superior communications and music listening Audio Mute - Reduces auxiliary audio volume and prevents missed communications Stereo/Mono Selection - Compatible with all aircraft audio panel configurations Five-Year Warranty - Backed by industry leading customer service -
11-12539 – DAVID CLARK PRO-A HEADSET – AIRBUS PLUG
Hybrid Electronic Noise Cancellation - Provides best-in-class active noise cancellation. Bluetooth® Wireless Technology - Seamless integration for connection to cell phones, MP3, tablets or other personal devices Dual Voice Coil Earphone Drivers Provide Fail-Safe Operation - Ensures full communication in the event of battery loss or system failure Digital Signal Processing (DSP) Technology - Provides high fidelity audio for superior communications and music listening Audio Mute - Reduces auxiliary audio volume and prevents missed communications Stereo/Mono Selection - Compatible with all aircraft audio panel configurations Five-Year Warranty - Backed by industry leading customer service -
11-12540 – DAVID CLARK PRO XA ANR HEADSET – AIRBUS PLUG
Hybrid Electronic Noise Cancellation - Provides best-in-class active noise cancellation. Bluetooth® Wireless Technology - Seamless integration for connection to cell phones, MP3, tablets or other personal devices Dual Voice Coil Earphone Drivers Provide Fail-Safe Operation - Ensures full communication in the event of battery loss or system failure Digital Signal Processing (DSP) Technology - Provides high fidelity audio for superior communications and music listening Audio Mute - Reduces auxiliary audio volume and prevents missed communications Stereo/Mono Selection - Compatible with all aircraft audio panel configurations Five-Year Warranty - Backed by industry leading customer service -
11-13091 – DAVID CLARK PRO S SINGLE SIDE HEADSET – DUAL GA PLUGS
The DC PRO-S passive headset incorporates the same outstanding comfort features as the DC PRO-X design (excluding Hybrid Electronic Noise Cancellation and Bluetooth wireless technology). Note: As with any passive headset featuring a supra-aural design, the DC PRO-S is not recommended for fixed wing, piston engine aircraft. This DC PRO-S was designed for use in the commercial/transport jet aircraft market. -
11-13518 – DAVID CLARK HEADSET HANGER
The 43200G-01 Headset Hanger is the perfect NFPA-compliant headset restraint for fire apparatus, EMS, and rescue vehicles. Manufactured from heavy duty, transportation-grade rubber, it is not affected by hot of cold temperatures, UV rays or corrosive marine environments. An integrated quick-release strap completes this unique, simple and effective solution for any style David Clark noise-attenuating headset.