Hoisting and Lifting Equipment

Showing 541–585 of 708 results

CM Shopstar 600 lb 8 fpm 230360 Electric Chain Hoist – 2035
$3,275.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2038
$3,275.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2039
$3,517.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 15 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600lb 8FPM 115160 Electric Chain Hoist – 2003
$3,287.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 15 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600lb 8FPM 460360 Electric Chain Hoist – 2040
$3,759.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 20 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar Electric Chain Hoist Model

The ShopStar CM Electric Chain Hoist is designed for heavy duty industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use in workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). FEATURES and BENEFITS: H4 DUTY CYCLE 300 motor starts per hour. RUGGED and DURABLE Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM D.C. brake plus regenerative. LONG CHAIN LIFE Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONS: SWIVEL HOOK SUSPENSION ShopStar Wiring Diagrams ShopStar Parts List Shopstar Manual - January 2024 (Current)
CM Shopstar Electric Chain Hoist Model

The ShopStar CM Electric Chain Hoist is designed for heavy duty industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use in workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The CM® Shopstar® electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). FEATURES and BENEFITS: H4 DUTY CYCLE 300 motor starts per hour. RUGGED and DURABLE Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM D.C. brake plus regenerative. LONG CHAIN LIFE Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONS: SWIVEL HOOK SUSPENSION ShopStar Wiring Diagrams ShopStar Parts List Shopstar Manual - January 2024 (Current)
CM Shopstar VS Electric Chain Hoist

The CM Shopstar VS variable speed electric chain hoist is built for rugged industrial and commercial applications where precision load control is critical. This durable hoist features a high H4-plus duty cycle and a compact design ideal for use at workstations and production lines. The ShopStar VS is a superior alternative to air hoists. FEATURES and BENEFITS: CAPACITY 1 ton LIFT HEIGHT Configurable FEEDING 230/ 380/460-3-50/60 CM ShopStar VS Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2407
$4,687.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2408
$4,687.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407B
$4,893.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407C
$5,099.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2408B
$4,893.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 20 ft Electric Chain Hoist – 2408C
$5,099.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2405
$4,434.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406
$4,434.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406B
$4,721.50
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 15 ft Electric Chain Hoist – 2405B
$4,721.50
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2405C
$5,009.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2406C
$5,009.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2403
$4,078.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2404
$4,078.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2403B
$4,248.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2404B
$4,248.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2403C
$4,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2404C
$4,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2401
$3,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2402
$3,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2401B
$3,588.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2402B
$3,588.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 20 ft Electric Chain Hoist – 2401C
$3,758.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 20 ft Electric Chain Hoist – 2402C
$3,758.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 2 Tons 8 fpm 10 ft Electric Chain Hoist – 2409
$5,710.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 2 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 2 Tons 8 fpm 10 ft Electric Chain Hoist – 2410
$5,710.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 2 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 2 Tons 8 fpm 15 ft Electric Chain Hoist – 2409B
$6,069.50
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 2 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 2 Tons 8 fpm 15 ft Electric Chain Hoist – 2410B
$6,069.50
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 2 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 2 Tons 8 fpm 20 ft Electric Chain Hoist – 2409C
$6,429.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 2 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 2 Tons 8 fpm 20 ft Electric Chain Hoist – 2410C
$6,429.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 2 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
Coffing EC Electric Chain Hoist

Coffing EC Hook & Lug Suspension Models are high performance hoists engineered for heavy duty industrial service. Designed for safety, the EC incorporates mechanical load brake, motor brake, and overload clutch as standard. FEATURES and BENEFITS: SUSPENSION OPTIONS Rigid or swivel top hook, lug, plain, geared, and motorized trolley available. LARGE FRAME DESIGN Features load bearing housings of ductile iron construction for maximum strength. Non-load bearing housings of cast aluminum alloy for minimum weight. Engineered and designed for use with higher torque 2 and 3 HP three-phase motors. SMALL FRAME DESIGN Features housings of cast aluminum alloy construction for minimum weight. Engineered and designed for use with motors up to 1 HP. DURABLE CONSTRUCTION Built-in compliance with ASME/ ANSI B30.16 and CSA standards OPTIONAL FEATURES Paddle Limit Switch Electronic Overload Sensor Trolley Limit Switches Wall-Mounted Push Button Stations NEMA 1, 2, 3R, 4X, 5, 12 & 13 PB Stations 3 - Foot Outrigger Arm Circuit Breaker Motor Fuses Mainline Contactor Solid State Trolley Soft Start Electrical Interlocks External Strain Relief Electronic Phase Reversal & Under Voltage Protection Magnetic Particle Inspection Horn or Bell Kellems Cord Grip Bridge or Tractor Controls Track Clamp Motor Thermostat Thermal Overload Relay Trolley Ballast Resistors (3-Phase Only) Multi-Button Push Button Stations Timers Retractable Coil Cord Coffing EC Product Sheet Coffing EC-V Manual Coffing EC Series with Motorized Trolley (ECMT) 2000 Feb Coffing EC1 Series Electric Chain Hoist 2017 April Coffing EC3 Series Electric Hoist 2017 March
Coffing EC Turnover Electric Chain Hoist

Coffing EC Turnover Models are specially modified EC Hoists designed for machining, assembly, or repair applications which require complete rotation and/or precise positioning of large, non-symmetrical work pieces. FEATURES and BENEFITS: RATED LOADS From 1/4 to 4 Tons. LIFT STROKE 15-foot standard. Consult factory for longer lift strokes. VOLTAGE 230/460, three phase motors standard. Consult factory for other voltages and two speed motors. RIGID LUG MOUNT ONLY Allows attachment to load hook of another hoist for vertical lifting. LOAD HOOKS Color coded load hooks with corresponding push button for operator convenience. Load hooks operate in opposite directions. Completely inverts virtually any shape load with use of simple slings and successive repositioning of load hooks. LIFETIME WARRANTY MADE IN THE USA COF EC Turnover Manual
Coffing EC-V Electric Chain Hoist

Coffing EC-V Models offer the same high performance for heavy duty industrial service as the EC Model with a Variable Speed option. Designed for safety, the EC-V incorporates mechanical load brake, motor brake, and overload clutch as standard. FEATURES and BENEFITS: SUSPENSION OPTIONS Rigid or swivel top hook, lug, plain, geared, and motorized trolley available. LARGE FRAME DESIGN Features load bearing housings of ductile iron construction for maximum strength. Non-load bearing housings of cast aluminum alloy for minimum weight. Engineered and designed for use with higher torque 2 and 3 HP three-phase motors. SMALL FRAME DESIGN Features housings of cast aluminum alloy construction for minimum weight. Engineered and designed for use with motors up to 1 HP. DURABLE CONSTRUCTION Built-in compliance with ASME/ ANSI B30.16 and CSA standards OPTIONAL FEATURES Paddle Limit Switch Electronic Overload Sensor Trolley Limit Switches Wall-Mounted Push Button Stations NEMA 1, 2, 3R, 4X, 5, 12 & 13 PB Stations 3 - Foot Outrigger Arm Circuit Breaker Motor Fuses Mainline Contactor Solid State Trolley Soft Start Electrical Interlocks External Strain Relief Electronic Phase Reversal & Under Voltage Protection Magnetic Particle Inspection Horn or Bell Kellems Cord Grip Bridge or Tractor Controls Track Clamp Motor Thermostat Thermal Overload Relay Trolley Ballast Resistors (3-Phase Only) Multi-Button Push Button Stations Timers Retractable Coil Cord Coffing ED Manual
Coffing ED Model Electric Chain Hoist

Coffing ED Models offer extended duty service for special applications which require a hoist that exceeds the duty rating of basic EC models. FEATURES and BENEFITS: SUSPENSION OPTIONS Rigid lug; plain, geared, and motorized trolleys. LOAD CHAIN Zinc plated standard for corrosion resistance. ACCESSORIES Full line of options to meet a variety of applications. VOLTAGE & MOTOR OPTIONS 230/460, three-phase motors standard. Totally enclosed, fan-cooled motor keeps both motor and transmission from overheating. Consult factory for other voltage and speed options. DUTY CYCLE Exceeds H4 duty service. EXTERNAL STRAIN RELIEF Secures to NEMA 3R push button station with extra strain relief protection. LIFETIME WARRANTY OPTIONAL FEATURES Paddle Limit Switch Electronic Overload Sensor Trolley Limit Switches Wall-Mounted Push Button Stations NEMA 1, 2, 3R, 4X, 5, 12 & 13 PB Stations 3 - Foot Outrigger Arm Circuit Breaker Motor Fuses Mainline Contactor Solid State Trolley Soft Start Electrical Interlocks External Strain Relief Electronic Phase Reversal & Under Voltage Protection Magnetic Particle Inspection Horn or Bell Kellems Cord Grip Bridge or Tractor Controls Track Clamp Motor Thermostat Thermal Overload Relay Trolley Ballast Resistors (3-Phase Only) Multi-Button Push Button Stations Timers Retractable Coil Cord Coffing ED Manual
Coffing JLC 1 Ton 16 fpm 10 ft Electric Chain Hoist – 08239W
$4,476.00
The JLC is engineered and built for the heavy-duty demands of industrial applications. Compact in size but big on features, the JLC boasts a multiple disc motor brake, overload clutch, and chain end stop for safety. SPECIFICATIONS: Rated Lift Capacity: 1 U.S. Ton Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) FEATURES and BENEFITS: CAPACITY 1 ton EASY ACCESS FOR MAINTENANCE Panel plate provides easy access to controls and motor leads for changing voltage on dual-voltage motors or servicing the hoist. Connection wires are numbered to assist with maintenance. HEAVY-DUTY MOTOR BRAKE Multiple disc motor brake with direct acting design for positive load spotting and holding. SMOOTHER LIFTING and REDUCED CHAIN WEAR 5-pocket load sheave increases chain and sheave engagement 25% over hoists with conventional 4-pocket sheaves. Provides smoother lifting and reduces chain wear. ADJUSTABLE LIMIT SWITCHES Regulate upper and lower load travel. Brass nuts standard for improved switch setting and repeatability. Stainless steel limit switch shaft standard. GUARDS AGAINST UNSAFE LOADING Mechanical overload protection device protects hoist, operator and supporting structures from damaging overloads, chain jamming, and reverse phasing. TWO-SPEED HOIST MODELS Optional with 3:1 speed ratio, 3-phase, single voltage only. LONGER and QUIETER OPERATION Oil bath transmission and precision machined alloy steel gears for longer, quieter operation. NEMA 3R PUSH BUTTON STATION Ergonomic design fits operator's hand for thumb or two-handed operation standard. 24V Control for operator safety. 115V Control available upon request. COMPACT ALUMINUM FRAME Housing designed for portability and ease of installation. STANDARD CHAIN CONTAINER Durable chain container is standard on lifts up to 20 ft. single chain and 10 ft. double chain. OPTIONAL VFD Variable frequency drive option is available in U.S. only. LIFETIME WARRANTY MADE IN THE USA Coffing JLC Manual Coffing JLC Electric Chain Operations Manual Coffing JLC Series Electric Hoist Parts Breakdown Coffing JLC Series Quick Start Guide Coffing JLCMT Series Electric Hoist Operations Manual Coffing JLC Electric Chain Hoist Technical Bulletin Coffing JLC Brochure (English) Coffing JLC Series Electric Hoist Operations Manual Coffing JLC Series Electric Hoist 2008 JLC680 1 Coffing JLC Series Electric Hoist 2011 Sept JLC680 1 Coffing- JLCMT Manual Coffing SLC Series Electric Hoist 2005 April 620 A
Coffing JLC 1 Ton 16 fpm 15 ft Electric Chain Hoist – 08240W
$4,681.25
The JLC is engineered and built for the heavy-duty demands of industrial applications. Compact in size but big on features, the JLC boasts a multiple disc motor brake, overload clutch, and chain end stop for safety. SPECIFICATIONS: Rated Lift Capacity: 1 U.S. Ton Requested Lift Distance (ft): 15 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) FEATURES and BENEFITS: CAPACITY 1 ton EASY ACCESS FOR MAINTENANCE Panel plate provides easy access to controls and motor leads for changing voltage on dual-voltage motors or servicing the hoist. Connection wires are numbered to assist with maintenance. HEAVY-DUTY MOTOR BRAKE Multiple disc motor brake with direct acting design for positive load spotting and holding. SMOOTHER LIFTING and REDUCED CHAIN WEAR 5-pocket load sheave increases chain and sheave engagement 25% over hoists with conventional 4-pocket sheaves. Provides smoother lifting and reduces chain wear. ADJUSTABLE LIMIT SWITCHES Regulate upper and lower load travel. Brass nuts standard for improved switch setting and repeatability. Stainless steel limit switch shaft standard. GUARDS AGAINST UNSAFE LOADING Mechanical overload protection device protects hoist, operator and supporting structures from damaging overloads, chain jamming, and reverse phasing. TWO-SPEED HOIST MODELS Optional with 3:1 speed ratio, 3-phase, single voltage only. LONGER and QUIETER OPERATION Oil bath transmission and precision machined alloy steel gears for longer, quieter operation. NEMA 3R PUSH BUTTON STATION Ergonomic design fits operator's hand for thumb or two-handed operation standard. 24V Control for operator safety. 115V Control available upon request. COMPACT ALUMINUM FRAME Housing designed for portability and ease of installation. STANDARD CHAIN CONTAINER Durable chain container is standard on lifts up to 20 ft. single chain and 10 ft. double chain. OPTIONAL VFD Variable frequency drive option is available in U.S. only. LIFETIME WARRANTY MADE IN THE USA Coffing JLC Manual Coffing JLC Electric Chain Operations Manual Coffing JLC Series Electric Hoist Parts Breakdown Coffing JLC Series Quick Start Guide Coffing JLCMT Series Electric Hoist Operations Manual Coffing JLC Electric Chain Hoist Technical Bulletin Coffing JLC Brochure (English) Coffing JLC Series Electric Hoist Operations Manual Coffing JLC Series Electric Hoist 2008 JLC680 1 Coffing JLC Series Electric Hoist 2011 Sept JLC680 1 Coffing- JLCMT Manual Coffing SLC Series Electric Hoist 2005 April 620 A
Coffing JLC 1 Ton 16 fpm 20 ft Electric Chain Hoist – 08241W
$4,886.50
The JLC is engineered and built for the heavy-duty demands of industrial applications. Compact in size but big on features, the JLC boasts a multiple disc motor brake, overload clutch, and chain end stop for safety. SPECIFICATIONS: Rated Lift Capacity: 1 U.S. Ton Requested Lift Distance (ft): 20 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) FEATURES and BENEFITS: CAPACITY 1 ton EASY ACCESS FOR MAINTENANCE Panel plate provides easy access to controls and motor leads for changing voltage on dual-voltage motors or servicing the hoist. Connection wires are numbered to assist with maintenance. HEAVY-DUTY MOTOR BRAKE Multiple disc motor brake with direct acting design for positive load spotting and holding. SMOOTHER LIFTING and REDUCED CHAIN WEAR 5-pocket load sheave increases chain and sheave engagement 25% over hoists with conventional 4-pocket sheaves. Provides smoother lifting and reduces chain wear. ADJUSTABLE LIMIT SWITCHES Regulate upper and lower load travel. Brass nuts standard for improved switch setting and repeatability. Stainless steel limit switch shaft standard. GUARDS AGAINST UNSAFE LOADING Mechanical overload protection device protects hoist, operator and supporting structures from damaging overloads, chain jamming, and reverse phasing. TWO-SPEED HOIST MODELS Optional with 3:1 speed ratio, 3-phase, single voltage only. LONGER and QUIETER OPERATION Oil bath transmission and precision machined alloy steel gears for longer, quieter operation. NEMA 3R PUSH BUTTON STATION Ergonomic design fits operator's hand for thumb or two-handed operation standard. 24V Control for operator safety. 115V Control available upon request. COMPACT ALUMINUM FRAME Housing designed for portability and ease of installation. STANDARD CHAIN CONTAINER Durable chain container is standard on lifts up to 20 ft. single chain and 10 ft. double chain. OPTIONAL VFD Variable frequency drive option is available in U.S. only. LIFETIME WARRANTY MADE IN THE USA Coffing JLC Manual Coffing JLC Electric Chain Operations Manual Coffing JLC Series Electric Hoist Parts Breakdown Coffing JLC Series Quick Start Guide Coffing JLCMT Series Electric Hoist Operations Manual Coffing JLC Electric Chain Hoist Technical Bulletin Coffing JLC Brochure (English) Coffing JLC Series Electric Hoist Operations Manual Coffing JLC Series Electric Hoist 2008 JLC680 1 Coffing JLC Series Electric Hoist 2011 Sept JLC680 1 Coffing- JLCMT Manual Coffing SLC Series Electric Hoist 2005 April 620 A

CM Shopstar 600 lb 8 fpm 230360 Electric Chain Hoist – 2035

CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2038

CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2039

CM Shopstar 600lb 8FPM 115160 Electric Chain Hoist – 2003

CM Shopstar 600lb 8FPM 460360 Electric Chain Hoist – 2040

CM Shopstar Electric Chain Hoist Model

CM Shopstar Electric Chain Hoist Model

CM Shopstar VS Electric Chain Hoist

CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2407

CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2408

CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407B

CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407C

CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2408B

CM Valustar 1 Ton 16 fpm 20 ft Electric Chain Hoist – 2408C

CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2405

CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406

CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406B

CM Valustar 1 Ton 8 fpm 15 ft Electric Chain Hoist – 2405B

CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2405C

CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2406C

CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2403

CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2404

CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2403B

CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2404B

CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2403C

CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2404C

CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2401

CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2402

CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2401B

CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2402B

CM Valustar 1/4 Tons 16 fpm 20 ft Electric Chain Hoist – 2401C

CM Valustar 1/4 Tons 16 fpm 20 ft Electric Chain Hoist – 2402C

CM Valustar 2 Tons 8 fpm 10 ft Electric Chain Hoist – 2409

CM Valustar 2 Tons 8 fpm 10 ft Electric Chain Hoist – 2410

CM Valustar 2 Tons 8 fpm 15 ft Electric Chain Hoist – 2409B

CM Valustar 2 Tons 8 fpm 15 ft Electric Chain Hoist – 2410B

CM Valustar 2 Tons 8 fpm 20 ft Electric Chain Hoist – 2409C

CM Valustar 2 Tons 8 fpm 20 ft Electric Chain Hoist – 2410C

Coffing EC Electric Chain Hoist

Coffing EC Turnover Electric Chain Hoist

Coffing EC-V Electric Chain Hoist

Coffing ED Model Electric Chain Hoist

Coffing JLC 1 Ton 16 fpm 10 ft Electric Chain Hoist – 08239W

Coffing JLC 1 Ton 16 fpm 15 ft Electric Chain Hoist – 08240W

Coffing JLC 1 Ton 16 fpm 20 ft Electric Chain Hoist – 08241W