Electric and Air Hoists

Showing 226–270 of 376 results

CM Shopstar 500 lb 20 fpm 230360 Electric Chain Hoist – 2101
$3,401.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 20 ft/min (6.1 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 500 lb 20 fpm 460360 Electric Chain Hoist – 2102
$3,401.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 20 ft/min (6.1 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 500 lb 24 fpm 230360 Electric Chain Hoist – 2099
$3,531.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 24 ft/min (7.3 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 500 lb 24 fpm 460360 Electric Chain Hoist – 2100
$3,531.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 24 ft/min (7.3 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 500 lb 8 fpm 115160 Electric Chain Hoist – 2094
$2,978.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 500 lb 8 fpm 115160 Electric Chain Hoist – 2095
$2,715.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 500 lb 8 fpm 460360 Electric Chain Hoist – 2097
$3,275.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 500lb 8FPM 230360 Electric Chain Hoist – 2096
$3,275.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 12 fpm 230360 Electric Chain Hoist – 2106
$3,339.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 12 ft/min (3.7 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 12 fpm 460360 Electric Chain Hoist – 2107
$3,339.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 12 ft/min (3.7 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 20 fpm 230360 Electric Chain Hoist – 2105
$3,401.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 20 ft/min (6.1 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 20 fpm 460360 Electric Chain Hoist – 2114
$3,401.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 20 ft/min (6.1 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 115160 Electric Chain Hoist – 2001
$3,045.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 115160 Electric Chain Hoist – 2005
$3,529.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 20 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 115160 Electric Chain Hoist – 2048
$2,978.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 230360 Electric Chain Hoist – 2035
$3,275.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2038
$3,275.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 10 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2039
$3,517.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 15 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600lb 8FPM 115160 Electric Chain Hoist – 2003
$3,287.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 15 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar 600lb 8FPM 460360 Electric Chain Hoist – 2040
$3,759.00
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 20 Operating Voltage: 460V / 3 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Shopstar Electric Chain Hoist Model

The ShopStar CM Electric Chain Hoist is designed for heavy duty industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use in workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). FEATURES and BENEFITS: H4 DUTY CYCLE 300 motor starts per hour. RUGGED and DURABLE Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM D.C. brake plus regenerative. LONG CHAIN LIFE Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONS: SWIVEL HOOK SUSPENSION ShopStar Wiring Diagrams ShopStar Parts List Shopstar Manual - January 2024 (Current)
CM Shopstar Electric Chain Hoist Model

The ShopStar CM Electric Chain Hoist is designed for heavy duty industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use in workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The CM® Shopstar® electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). FEATURES and BENEFITS: H4 DUTY CYCLE 300 motor starts per hour. RUGGED and DURABLE Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM D.C. brake plus regenerative. LONG CHAIN LIFE Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONS: SWIVEL HOOK SUSPENSION ShopStar Wiring Diagrams ShopStar Parts List Shopstar Manual - January 2024 (Current)
CM Shopstar VS Electric Chain Hoist

The CM Shopstar VS variable speed electric chain hoist is built for rugged industrial and commercial applications where precision load control is critical. This durable hoist features a high H4-plus duty cycle and a compact design ideal for use at workstations and production lines. The ShopStar VS is a superior alternative to air hoists. FEATURES and BENEFITS: CAPACITY 1 ton LIFT HEIGHT Configurable FEEDING 230/ 380/460-3-50/60 CM ShopStar VS Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2407
$4,687.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2408
$4,687.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407B
$4,893.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407C
$5,099.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2408B
$4,893.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 16 fpm 20 ft Electric Chain Hoist – 2408C
$5,099.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2405
$4,434.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406
$4,434.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406B
$4,721.50
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 15 ft Electric Chain Hoist – 2405B
$4,721.50
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2405C
$5,009.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2406C
$5,009.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 8 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2403
$4,078.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2404
$4,078.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2403B
$4,248.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2404B
$4,248.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2403C
$4,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2404C
$4,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/2 Metric Ton Max. Lift Dist.: 20 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2401
$3,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2402
$3,418.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 10 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2401B
$3,588.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 115/1/60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U
CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2402B
$3,588.00
The CM Valustar Electric Chain Hoist features a compact, lightweight design built specifically for general commercial applications. Valustar is an economical choice for your material handling needs. SPECIFICATION: Suspension: Hook Mounted Rated Lift Capacity: 1/4 Metric Ton Max. Lift Dist.: 15 Operating Voltage: 230/460-3-60 Hoist Control Type: Single Speed Maximum Lifting Speed: 16 FEATURES and BENEFITS: Standard Features H3 duty-1 phase; H-4 duty-3 phase. 5 ft. power cord length, heavy-duty caliper type AC brake, rugged NEMA 4 control station, 115 volt control circuit. Standard hook suspension, latch-type hooks, overload protector, and enclosed hoist duty motor. Built to Last Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear. Includes Hoistaloy load chain for smooth operation and maximum chain life. Gear train lifetime lubricated with non-oxidizing grease. Fully machined and heat treated gear train. Additional Product Information Easy to install and maintain. One-year warranty. Metric rated. Made in the U.S.A. Designed specifically for general commercial applications. This compact, lightweight hoist features: Fully machined and heat treated liftwheel with hardened chain guides for smooth chain operation and reduced chain wear 5 ft. power cord length Heavy-duty caliper type AC brake Rugged NEMA 4 control station, 115 volt control circuit Easy to install and maintain Hoistaloy load chain for smooth operation and maximum chain life Efficient regenerative braking system to avoid heat generation in power train Enclosed hoist duty motor Gear train lifetime lubricated with non-oxidizing grease Latch type hooks Hook suspension standard Fully machined and heat treated gear train Standard overload Protector device H3 duty-1 phase; H-4 duty-3 phase Lifetime warranty Metric rated Made in U.S.A. CM Valustar Brochure CM Chain Bag Installation Lodestar ValuStar Hoist 24834 A CM Valustar Electric Chain Hoist 1994 Oct 624 G CM Valustar Electric Chain Hoist 1999 April 624 L CM Valustar Electric Chain Hoist 2002 Oct 624 N CM Valustar Electric Chain Hoist 2005 624 Q CM Valustar Electric Chain Hoist 2005 April 624 P CM Valustar Electric Chain Hoist 2008 624 S CM Valustar Electric Chain Hoist 2008 624 T CM Valustar Electric Chain Hoist 2009 624 U

CM Shopstar 500 lb 20 fpm 230360 Electric Chain Hoist – 2101

CM Shopstar 500 lb 20 fpm 460360 Electric Chain Hoist – 2102

CM Shopstar 500 lb 24 fpm 230360 Electric Chain Hoist – 2099

CM Shopstar 500 lb 24 fpm 460360 Electric Chain Hoist – 2100

CM Shopstar 500 lb 8 fpm 115160 Electric Chain Hoist – 2094

CM Shopstar 500 lb 8 fpm 115160 Electric Chain Hoist – 2095

CM Shopstar 500 lb 8 fpm 460360 Electric Chain Hoist – 2097

CM Shopstar 500lb 8FPM 230360 Electric Chain Hoist – 2096

CM Shopstar 600 lb 12 fpm 230360 Electric Chain Hoist – 2106

CM Shopstar 600 lb 12 fpm 460360 Electric Chain Hoist – 2107

CM Shopstar 600 lb 20 fpm 230360 Electric Chain Hoist – 2105

CM Shopstar 600 lb 20 fpm 460360 Electric Chain Hoist – 2114

CM Shopstar 600 lb 8 fpm 115160 Electric Chain Hoist – 2001

CM Shopstar 600 lb 8 fpm 115160 Electric Chain Hoist – 2005

CM Shopstar 600 lb 8 fpm 115160 Electric Chain Hoist – 2048

CM Shopstar 600 lb 8 fpm 230360 Electric Chain Hoist – 2035

CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2038

CM Shopstar 600 lb 8 fpm 460360 Electric Chain Hoist – 2039

CM Shopstar 600lb 8FPM 115160 Electric Chain Hoist – 2003

CM Shopstar 600lb 8FPM 460360 Electric Chain Hoist – 2040

CM Shopstar Electric Chain Hoist Model

CM Shopstar Electric Chain Hoist Model

CM Shopstar VS Electric Chain Hoist

CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2407

CM Valustar 1 Ton 16 fpm 10 ft Electric Chain Hoist – 2408

CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407B

CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2407C

CM Valustar 1 Ton 16 fpm 15 ft Electric Chain Hoist – 2408B

CM Valustar 1 Ton 16 fpm 20 ft Electric Chain Hoist – 2408C

CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2405

CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406

CM Valustar 1 Ton 8 fpm 10 ft Electric Chain Hoist – 2406B

CM Valustar 1 Ton 8 fpm 15 ft Electric Chain Hoist – 2405B

CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2405C

CM Valustar 1 Ton 8 fpm 20 ft Electric Chain Hoist – 2406C

CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2403

CM Valustar 1/2 Tons 16 fpm 10 ft Electric Chain Hoist – 2404

CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2403B

CM Valustar 1/2 Tons 16 fpm 15 ft Electric Chain Hoist – 2404B

CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2403C

CM Valustar 1/2 Tons 16 fpm 20 ft Electric Chain Hoist – 2404C

CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2401

CM Valustar 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – 2402

CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2401B

CM Valustar 1/4 Tons 16 fpm 15 ft Electric Chain Hoist – 2402B