Caterpillar
Showing 11161–11205 of 11910 results
-
Caterpillar 7N-7091 Fuel Injection Line
Length (in): 26 Width (in): 13 Height (in): 4.5 Weight (lbs): 0.88 Length (mm): 660.4 Width (mm): 330.2 Height (mm): 114.3 Weight (kg): 0.4 -
Caterpillar 7N-7092 Fuel Injection Line
Length (in): 24 Width (in): 22.5 Height (in): 3.5 Weight (lbs): 0.87 Length (mm): 609.6 Width (mm): 571.5 Height (mm): 88.9 Weight (kg): 0.39 -
Caterpillar 7N-7264 Governor Weight
Length (in): 4 Length (mm): 101.6 Width (in): 4 Width (mm): 101.6 Height (in): 1 Height (mm): 25.4 Weight (lbs): 0.11 Weight (kg): 0.05 -
Caterpillar 7N-7269 Governor Actuator
Length (in): 3.14 Width (in): 2.31 Height (in): 1.66 Weight (lbs): 0.12 Length (mm): 79.76 Width (mm): 58.67 Height (mm): 42.16 Weight (kg): 0.05 -
Caterpillar 7N-7445 Cylinder Block
Thrust washers are an important component of air compressors, which provide air supply to different parts of the engine where needed Mount Type: Cup Mount Overall Length (mm): 66.0 Overall Length (in): 2.60 Cup Outside Diameter (mm): 104.9 Cup Outside Diameter (in): 4.13 Cup Inside Diameter (mm): 50.8 Cup Inside Diameter (in): 2.00 -
Caterpillar 7N-7612 Idler Pulley
Length (mm): 266.7 Width (mm): 139.7 Height (mm): 139.7 Weight (kg): 3.8 -
Caterpillar 7N-7626 Alternator Pulley
Length (mm): 281.9 Width (mm): 281.9 Height (mm): 78.7 Weight (kg): 6.8 -
Caterpillar 7N-7747 Turbocharger Turbine Housing
Length (in): 8.3 Width: 8 Height(in): 6.5 Weight (lbs): 14.5 -
Caterpillar 7N-7783 Governor Sleeve
Length (in): 8 Width (in): 5 Height (in): 0.3 Weight (lbs): 0.03 Length (mm): 203.2 Width (mm): 127 Height (mm): 7.62 Weight (kg): 0.01 -
Caterpillar 7N-7988 Mount Assembly
Isolation mounts are used to attach and position systems, accommodate displacement, and isolate components from the surrounding structure (vibration, shock, noise.) Mount Type: Two-Piece - Symmetric Head Outside Diameter (mm): 114.3 Head Outside Diameter (in): 4.5 Head Thickness (mm): 35 Head Thickness (in): 1.38 Pilot Outside Diameter (mm): 69.8 Pilot Outside Diameter (in): 2.75 Inside Diameter (mm): 27 Inside Diameter (in): 1.06 Mount Height (mm): 45.1 Mount Height (in): 1.78 Bonded Sleeve: No Standard Bolt Size: M24 -
Caterpillar 7N-8117 Muffler
Length (mm): 894.08 Width (mm): 269.24 Height (mm): 167.64 Weight (kg): 8.37 -
Caterpillar 7N-8371 Fuel Injection Line
Length (in): 7 Width (in): 6.4 Height (in): 0.9 Weight (lbs): 0.45 Length (mm): 177.8 Width (mm): 162.56 Height (mm): 22.86 Weight (kg): 0.2 -
Caterpillar 7N-8827 Fan Drive Hub Assembly
Length (mm): 160 Width (mm): 160 Height (mm): 114.3 Weight (kg): 3 -
Caterpillar 7N-8828 Fan Drive Pulley
Length (mm): 269.2 Width (mm): 269.2 Height (mm): 139.7 Weight (kg): 9.1 -
Caterpillar 7N-8923 Muffler
Length (mm): 1005.84 Width (mm): 485.14 Height (mm): 330.2 Weight (kg): 39.92 -
Caterpillar 7N-9104 Crankshaft Pulley
Length (mm): 337.8 Width (mm): 337.8 Height (mm): 144.8 Weight (kg): 14.3 -
Caterpillar 7N-9240 Mount
Isolation mounts are used to attach and position systems, accommodate displacement, and isolate components from the surrounding structure (vibration, shock, noise.) Mount Type: Plateform - 2 Hole Mounting Overall Height or Sleeve Length (mm): 57.2 Overall Height or Sleeve Length (in): 2.25 Sleeve Inner Diameter or Thread (mm): 17.4 Sleeve Inner Diameter or Thread (in): 0.69 Distance Between Flange Holes (mm): 108 Distance Between Flange Holes (in): 4.25 -
Caterpillar 7N-9297 Cylinder Head Assembly
Cat® Reman Part Number: 0R-2082 Length (in): 39.5 Width (in): 17 Height (in): 8.75 Weight (lbs): 279.56 Length (mm): 1003.3 Width (mm): 431.8 Height (mm): 222.25 Weight (kg): 126.81 -
Caterpillar 7N-9564 Turbocharger Turbine Housing
Length (in): 12.1 Width: 12.1 Height(in): 8.5 Weight (lbs): 8.3 -
Caterpillar 7N-9647 Muffler
Length (mm): 1145.54 Width (mm): 726.44 Height (mm): 533.4 Weight (kg): 36.14 -
Caterpillar 7N-9665 Alternator Pulley
Length (mm): 160 Width (mm): 160 Height (mm): 114.3 Weight (kg): 3 -
Caterpillar 7N-9674 Muffler
Length (mm): 876.3 Width (mm): 774.7 Height (mm): 304.8 Weight (kg): 51.93 -
Caterpillar 7N-9843 Nozzle As
Cat® fuel injector nozzles utilize specialized product metallurgy, proprietary manufacturing processes and design, to deliver injectors capable of meeting today's performance and injection pressures for emissions requirements. New Part Number: 175-6779 Length (in): 15.7 Width (in): 14.6 Height (in): 6.6 Weight (lbs): 51.5 Length (mm): 398.8 Width (mm): 370.8 Height (mm): 167.6 Weight (kg): 23.36 -
Caterpillar 7N-9923 Governor
Length (in): 20 Width (in): 17 Height (in): 23.5 Weight (lbs): 96.4 Length (mm): 508 Width (mm): 431.8 Height (mm): 596.9 Weight (kg): 43.73 -
Caterpillar 7P-3453 Straight Sleeve Bearing
Approximate Inside Diameter (mm): 76 Approximate Outside Diameter (mm): 89 Approximate Overall Length (mm): 100 Cross Holes: No Unit of Measure: M Internal Groove: Yes External Groove: No Material: Steel -
Caterpillar 7P-3466 Straight Sleeve Bearing
Cross Holes: Yes Unit of Measure: M Internal Groove: Yes External Groove: Yes Material: Steel -
Caterpillar 7P-6348 Straight Sleeve Bearing
Approximate Inside Diameter (mm): 140 Approximate Outside Diameter (mm): 159 Approximate Overall Length (mm): 40 Cross Holes: No Unit of Measure: M Internal Groove: No External Groove: No Material: P/M Steels -
Caterpillar 7P-7698 Straight Sleeve Bearing
Cross Holes: No Unit of Measure: M Internal Groove: No External Groove: No Material: P/M Steels -
Caterpillar 7P-7858 Straight Sleeve Bearing
Approximate Inside Diameter (mm): 51 Approximate Outside Diameter (mm): 64 Approximate Overall Length (mm): 50 Cross Holes: No Unit of Measure: M Internal Groove: No External Groove: No Material: P/M Steels -
Caterpillar 7P-8371 Straight Sleeve Bearing
Approximate Inside Diameter (mm): 102 Approximate Outside Diameter (mm): 121 Approximate Overall Length (mm): 80 Cross Holes: No Unit of Measure: M Internal Groove: No External Groove: No Material: P/M Steels -
Caterpillar 7S-2233 Vibration Damper
Length (mm): 337.8 Width (mm): 337.8 Height (mm): 144.8 Weight (kg): 17.8 -
Caterpillar 7S-2670 Straight Sleeve Bearing
Cross Holes: No Unit of Measure: E Internal Groove: No External Groove: No Material: Steel -
Caterpillar 7S-4411 Exhaust Rain Cap
Length (in): 14 Length (mm): 355.6 Width (in): 6.7 Width (mm): 170.18 Height (in): 6.7 Height (mm): 170.18 Weight (lbs): 6 Weight (kg): 2.72 -
Caterpillar 7S-4434 Fuel Transfer Pump Body
Length (in): 4.9 Width (in): 4.9 Height (in): 1.8 Weight (lbs): 2.4 Length (mm): 124.46 Width (mm): 124.46 Height (mm): 45.72 Weight (kg): 1.09 -
Caterpillar 7S-5003 Exhaust Rain Cap
Length (in): 8 Length (mm): 203.2 Width (in): 8 Width (mm): 203.2 Height (in): 17.1 Height (mm): 434.34 Weight (lbs): 7.92 Weight (kg): 3.59 -
Caterpillar 7S-5787 Precombustion Chamber
Cat® parts are manufactured to precise specifications and are built for durability, reliability, productivity, less environmental impact, and reuse Length (mm): 228.6 Width (mm): 139.7 Height (mm): 139.7 Weight (kg): 4.81 -
Caterpillar 7S-5877 Water Pump Pulley
Length (mm): 274.3 Width (mm): 274.3 Height (mm): 172.7 Weight (kg): 13.2 -
Caterpillar 7S-6145 Straight Sleeve Bearing
Approximate Inside Diameter (mm): 26 Approximate Outside Diameter (mm): 32 Approximate Overall Length (mm): 40 Cross Holes: No Unit of Measure: E Internal Groove: No External Groove: No Material: P/M Steels -
Caterpillar 7S-6147 Straight Sleeve Bearing
Approximate Inside Diameter (mm): 26 Approximate Outside Diameter (mm): 32 Approximate Overall Length (mm): 44 Cross Holes: No Unit of Measure: E Internal Groove: No External Groove: No Material: P/M Steels -
Caterpillar 7S-6681 Fuel Injection Pump Plunger and Barrel Assembly
Length (in): 3.14 Width (in): 2.29 Height (in): 1.66 Weight (lbs): 0.4 Length (mm): 79.76 Width (mm): 58.17 Height (mm): 42.16 Weight (kg): 0.18 -
Caterpillar 7S-6683 Fuel Injection Pump Bonnet
Length (in): 4.5 Width (in): 4 Height (in): 1.1 Weight (lbs): 0.21 Length (mm): 114.3 Width (mm): 101.6 Height (mm): 27.94 Weight (kg): 0.1 -
Caterpillar 7S-7144 Cylinder Head Valve Spring
Length (in): 12 Length (mm): 304.8 Width (in): 8 Width (mm): 203.2 Height (in): 2 Height (mm): 50.8 Weight (lbs): 1.92 Weight (kg): 0.87 -
Caterpillar 7S-7150 Fuel Injection Line
Length (in): 3.4 Width (in): 1.9 Height (in): 0.8 Weight (lbs): 0.27 Length (mm): 86.36 Width (mm): 48.26 Height (mm): 20.32 Weight (kg): 0.12 -
Caterpillar 7S-7759 Turbocharger Turbine Shaft
Length (MM): 254 Width (MM): 139.7 Height(mm): 132.1 Weight (kg): 0.68 -
Caterpillar 7S-8443 Muffler
Length (mm): 833.12 Width (mm): 248.92 Height (mm): 368.3 Weight (kg): 7.34