PARAGON ISO 100 Drum Enclosed Gear Oils
$2,507.15
Bulk Orders
Competitive Pricing
Short Lead Times
Consolidated Shipping
Prompt Response
Request a Quote
Extreme pressure protection is assured with Paragon Enclosed Gear Oil, even under the most severe conditions of high load, shock load, and reversing motion.
Enclosed gearing systems in surface mining and mineral processing equipment are subjected to unique and demanding operating conditions. Whitmore’s Paragon Enclosed Gear Oil is formulated specifically for tough mining applications. Also suitable for severe industrial applications.
All Paragon Enclosed Gear Oil grades meet the requirements of DIN 51517-3.
BENEFITS:
- ANTIWEAR – protects even under severe conditions to extend gear life.
- ANTIFOAM – protects seals, lowers temperatures, and aids in extending oil life.
- LONG LIFE – Reduces disposal and overall cost.
- TACKY – allows a protective film of lubricant to cling to gearing surfaces even during long shutdowns.
APPLICATIONS:
Paragon Enclosed Gear Oil is designed for use in heavily loaded gearboxes including planetary drive systems and PIV chain drives.
Size and Type Container: Drum
Weight: 448 LBS.
Additional information
| Weight | 448 lbs |
|---|
Related products
-
KOPR-KOTE ARCTIC 5 GALLON
$284.67Oilfield Tool Joint & Drill Collar Compound - Arctic Formula Jet-Lube Kopr-Kote Arctic Drill Collar and Tool Joint Compound is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE ARCTIC uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE®. For severe cold drilling applications KOPR-KOTE ARCTIC utilizes very low pour-point naphthenic oil which greatly improves the applicability of the compounds to the connection while providing the same water resistance of standard KOPR-KOTE. Benefits of using Kopr-Kote Arctic Repeatable frictional characteristics Resistance to downhole make-up Highly adhesive Improved low temperature applicability Contains no lead or zinc Extreme pressure additives Sticks to wet joints Benefits Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 1.15 (drill strings) Relative to API RP 7G, 1.40 (relative to API-Mod) Relative to API RP 5A3 Certifications: Not classified as marine pollutant - DOT Approval CA2004080025 View all -
#202 MOLY-LITH 400 lb Drum
$4,055.02JET-LUBE #202 MOLY-LITH has exceptional resistance to the effects of heat, water, weathering, oxidation and heavy loads. It contains rust, corrosion and oxidation inhibitors. #202 MOLY-LITH provides unexcelled protection wherever dirt, dust, high humidity, rain and adverse temperatures are problems; highly adhesive, pumpable and stable. BENEFITS: Has a dropping point of >390°F Excellent work stability under high loads, shock, and vibration Water resistant Fortified with rust and corrosion inhibitors High strength fluid film High lithium soap content >10% High moly content >8% Pumpable formula Temkin load – 60 lbs. Designed for: Excellent for rack/pinion grease cups, drive shaft idler arm and ball joints. Specifically formulated to protect your equipment from premature damages that can occur from dirt, dust, and sediments. The high soap content builds a shield between the bearing surfaces and the external elements. Contains micro-fine Molybdenum Disulfide (MoS2) particles to further enhance load carrying and low friction characteristics. Applications Automotive and industrial applications, including all grease fittings where semi-solid or plastic consistency grease is normally used. Reapplication according to owner’s manual to maintain excellent equipment functionality. Not Recommended for Oxygen Service Service Rating: 0°F to 300°F -18°C to 150°C -
JET-LUBE NCS 30 DPC 3.5 Gal
$291.19Oilfield Nonmetallic Thread Compound Jet-Lube NCS-30 Oilfield 3.5 Gal Pail is a premium quality, nonmetallic compound containing carbon based fibers and additives, and other natural extreme pressure and anti-wear additives. These are blended into Jet-Lube's high temp calcium complex base grease. This base grease offers the additional advantage of superior adhesion to wet steel surfaces, resistance to water wash-off, and most drilling muds. It's especially effective for invert or high-pH muds. Ideal tubing connections - rotary shouldered, double shouldered and premium. Benefits of using NCS-30® Non-conductive for MWD drilling applications High temp grease Resistance to high pH drilling fluids / muds Non-metallic Specifications: Base Materials: Calcium Complex / Petroleum Friction / K-Factor: 1.15 drill strings (Relative to API RP 7G) Certifications: NSF H2 Registered, Conforms to the API RP7G torque charts Service Rating: -20°F to 500°F, -29°C to 260°C TDS SDS -
JET-LUBE SEAL-GUARD 9 lb
$112.34Premium Thread Compound - Environmental Formula SEAL-GUARD 9 lb is specifically formulated to meet the performance requirements of proprietary, metal-to-metal seal, and high interference connection designs utilizing today's high performance materials including super chrome and high alloy steels. SEAL-GUARD's formulation uses a tightly controlled small particle size distribution and may not provide optimum sealability on buttress thread forms. Ideal tubing connections - premium. Benefits Advanced base grease and additive technology High & low strength polymers High loads Galling resistant Sub-micron particles formed by chemical reaction Metal-free High film strength H₂S inhibitor Specifications: Base Materials: Complex / Petroleum Friction / K-Factor: 1.0 (Relative to API MODIFIED) Certifications: Ospar Commission - Harmonized Offshore Chemical Notification Format (HOCNF) CLASSIFICATION: “Red” rating for Norway CLASSIFICATION: “D” for The United Kingdom and The Netherlands Service Rating: -20°F to 450°F, -29°C to 232°C