MATRIX EP 1 Liner Keg Greases
$1,010.93
Bulk Orders
Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack.
The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed.
Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes.
A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing.
Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN.
Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711).
BENEFITS:
- LONG LIFE – reduced relubrication frequency.
- WATER RESISTANT – seals out water, even in underwater applications.
- WIDE SPEED RANGE – recommended for use in electric motor bearings as well as slow moving bearings and bushings.
APPLICATIONS:
Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications.
Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others.
High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders.
Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings
Size and Type Container: Keg
Weight: 134 LBS.
Additional information
Weight | 133 lbs |
---|
Related products
-
#202 MOLY-LITH 400 lb Drum
$4,055.02JET-LUBE #202 MOLY-LITH has exceptional resistance to the effects of heat, water, weathering, oxidation and heavy loads. It contains rust, corrosion and oxidation inhibitors. #202 MOLY-LITH provides unexcelled protection wherever dirt, dust, high humidity, rain and adverse temperatures are problems; highly adhesive, pumpable and stable. BENEFITS: Has a dropping point of >390°F Excellent work stability under high loads, shock, and vibration Water resistant Fortified with rust and corrosion inhibitors High strength fluid film High lithium soap content >10% High moly content >8% Pumpable formula Temkin load – 60 lbs. Designed for: Excellent for rack/pinion grease cups, drive shaft idler arm and ball joints. Specifically formulated to protect your equipment from premature damages that can occur from dirt, dust, and sediments. The high soap content builds a shield between the bearing surfaces and the external elements. Contains micro-fine Molybdenum Disulfide (MoS2) particles to further enhance load carrying and low friction characteristics. Applications Automotive and industrial applications, including all grease fittings where semi-solid or plastic consistency grease is normally used. Reapplication according to owner’s manual to maintain excellent equipment functionality. Not Recommended for Oxygen Service Service Rating: 0°F to 300°F -18°C to 150°C -
JET-LUBE 21 Joint/Drill Collar Compound
$82.63Oilfield Drill Collar & Tool Joint Compound Environmentally-friendly, double duty drill collar and tool joint compound, formulated to provide a superior level of performance for the increasing demands of today’s oilfield market. 21®'s lead-free formulation contains copper flake as the only metallic component and is fortified by a unique blend of natural, inorganic, extreme-pressure, and anti-wear additives. 21 utilizes our EXTREME base grease which is resistant to invert or high-pH muds and provides better pipe storage properties. Specifications: Base Materials: Complex / Petroleum Friction / K-Factor: 1.15 standard service (Relative to API RP 7G) Certifications: Not classified as a marine pollutant, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C TDS -
11423 – JET-LUBE EXTREME 1 GAL. PAIL
$104.63This product is available in another size. Learn more here: Tool Joint & Drill Collar Compound Offers the advantage of superior adhesion, improved extreme pressure and anti-wear properties, resistance to water wash-off, and superior rust and corrosion protection in the presence of invert or high-pH muds. The resistance also allows EXTREME to be used for up to 6 months connection storage. Its solids package is formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces. Tubing connections ideal - rotary shouldered. Benefits Highly resistant to high pH drilling muds Brushable and stable over a wide temperature range Rust & corrosion inhibited Excellent resistance to make up downhole Sticks to wet joints Specifications Base Materials: Complex Soap / Petroleum Friction / K-Factor: 1.15 (Relative to API RP 7G) Certifications: Not classified as a marine pollutant - DOT Approval CA2006100003, Conforms to the API RP7G make-up charts Service Rating: 0°F to 450°F, -18°C to 232°C -
JET-LUBE SEAL-GUARD 18 lb
$206.73Premium Thread Compound - Environmental Formula SEAL-GUARD 18 lb is specifically formulated to meet the performance requirements of proprietary, metal-to-metal seal, and high interference connection designs utilizing today's high performance materials including super chrome and high alloy steels. SEAL-GUARD's formulation uses a tightly controlled small particle size distribution and may not provide optimum sealability on buttress thread forms. Ideal tubing connections - premium. Benefits Advanced base grease and additive technology High & low strength polymers High loads Galling resistant Sub-micron particles formed by chemical reaction Metal-free High film strength H₂S inhibitor Specifications: Base Materials: Complex / Petroleum Friction / K-Factor: 1.0 (Relative to API MODIFIED) Certifications: Ospar Commission - Harmonized Offshore Chemical Notification Format (HOCNF) CLASSIFICATION: “Red” rating for Norway CLASSIFICATION: “D” for The United Kingdom and The Netherlands Service Rating: -20°F to 450°F, -29°C to 232°C TDS SDS