Matrix EP 0 Drum w/Liner Greases
$3,107.19
Bulk Orders
Matrix is a calcium sulfonate complex grease that is highly recommended for difficult applications such as extreme pressure, water, heat, or chemical attack.
The thickener system in Matrix has a protective effect similar to that of molybdenum disulfide, protecting equipment from wear under difficult conditions of extreme load and slow speed.
Matrix helps neutralize acids and also resists reacting with caustic materials. Matrix grease has prevented corrosion despite years of exposure to phosphoric acid fumes.
A continuous temperature of 400°F (200°C) is within its safe range. It can withstand 550°F (288°C) continuously, provided the bearing is replenished every 30 minutes with normal quantities of grease. Occasional temperature spikes to 600°F (315°C) can be sustained for 5 to 10 minute periods without melting or carbonizing.
Matrix EP 2 may be used at DN speeds up to 200,000. Matrix TK 2 (NLGI grade 2) is designed for slower moving bearings up to 150,000 DN.
Matrix EP 2 is the preferred grade for electric motor bearings. Matrix EP 2 meets the Bucyrus International specification for multi-purpose grease (SD 4711).
BENEFITS:
- LONG LIFE – reduced relubrication frequency.
- WATER RESISTANT – seals out water, even in underwater applications.
- WIDE SPEED RANGE – recommended for use in electric motor bearings as well as slow moving bearings and bushings.
APPLICATIONS:
Water / Chemicals: Phosphate processing, suction and wet end rolls on paper machines, outdoor cranes and ship lifts, boat trailer wheel bearings and other marine applications.
Highly Loaded Equipment: Pellet mills, shaker screens, belt conveyor pulleys, slewing bearings, pin and bushing, centrifuges, hammer-mills, sealed work roll bearings, fan bearings and many others.
High Temperature Applications: Oven conveyor bearings, plastic extruder bearings, rotary unions on roto-molders.
Automotive and Earthmoving Applications: Wheel bearings, Ujoints, ball joints, pin-and-busing pivot points and slewing bearings
Size and Type Container: Drum w/Liner
Weight: 441 LBS.
Additional information
| Weight | 441.0 lbs |
|---|
Related products
-
KOPR-KOTE ARCTIC 2-1/2 GALLON
-
WHITMORE ZINC 50 3P Greases
Whitmore's Zinc 50 Tool Joint Compound contains prime grade zinc and is formulated with 50% metallic zinc which meets the metallic zinc requirements as described in API Bulletin 5A2. Zinc 50 contains special additives to reduce the plating and build up of metallic zinc encountered with other zinc compounds. Zinc 50 is manufactured with Whitmore's unique grease compounded from custom refined, low sulfur oil. The grease base ensures the product can be applied (brushed) over a wide temperature range. It clings to all surfaces, resists water washout, and prevents rust and corrosion. The metallic zinc particles and other additives are maintained in uniform suspension throughout the compound. Zinc 50 displaces moisture and adheres well to wet tool joint surfaces. BENEFITS: Non-plating. Low sulfur content. Non-reactive, no gassing. Sticks to wet joints. Rig floor make-up. Resistant to further downhole make-up. APPLICATIONS: Whitmore's Zinc 50 Tool Joint Compound is designed to provide the maximum protection to tool joint threads and shoulders over a wide variety of conditions. It prevents galling and wear. It ensures consistent rig floor make-up while providing resistance to further make-up downhole. Approved by Atlas CopcoSize and Type Container: 3P Weight: 38 LBS. -
VORTEX EP 1 50 CT CARTRIDGES Greases
Whitmore’s Vortex Coupling Grease is a tacky, lithium-polymer thickened grease specifically formulated for long term lubrication of greased mechanical couplings including gear tooth, chain type, and steel grid designs. Vortex may be used in couplings of any size and at high speed. Results of the high-speed centrifugal test (ASTM D-4425) have shown that the dual thickener used in Vortex permits only miniscule oil separation even at 15,000 rpm. Oil separation is the major cause of lubricant failure in couplings. Robust anti-wear and extreme pressure additives in combination with a high viscosity fluid assure protection from abrasive wear that is generated by low amplitude, high frequency rubbing motion common to industrial couplings. Vortex can be used to lubricate slow moving, heavily loaded bushings, especially where water contamination exists. It is also recommended for pressurized wire rope lubrication devices. Supplemental heat may be required in order to facilitate pumping at temperatures below freezing. BENEFITS: REDUCED DOWNTIME - no unscheduled downtime due to lubrication failures. HOUSEKEEPING - no oil leakage, even where seals are imperfect. LONG LIFE - extended grease life gives an extra measure of security and reduces maintenance labor. ALL COUPLINGS - one product can be used for all sizes and speeds, including areas of water contamination. TEMPERATURE RANGE – Usable from -20° F to 300°F (-30° C to 150° C) APPLICATIONS: Use Vortex in all sizes of gear, chain and grid type couplings, where grease is the recommended lubricant. Typical manufacturers include Fast’s, Koppers, Lovejoy, Falk, TB Wood’s, and Browning. Vortex can be used at all speeds found in industrial applications and also in the presence of water and steam. Also suitable for slow-moving bushings and greased wire ropes. Vortex meets the requirements of AGMA CG-1, CG-2, and CG-3 for coupling grease Size and Type Container: CS Weight: 50 LBS. -
KOPR-KOTE ARCTIC 5 GALLON
$284.67Oilfield Tool Joint & Drill Collar Compound - Arctic Formula Jet-Lube Kopr-Kote Arctic Drill Collar and Tool Joint Compound is a premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives. KOPR-KOTE ARCTIC uses the same solids package formulated to prevent excessive circumferential makeup by increasing the coefficient of friction under compressive forces as standard KOPR-KOTE®. For severe cold drilling applications KOPR-KOTE ARCTIC utilizes very low pour-point naphthenic oil which greatly improves the applicability of the compounds to the connection while providing the same water resistance of standard KOPR-KOTE. Benefits of using Kopr-Kote Arctic Repeatable frictional characteristics Resistance to downhole make-up Highly adhesive Improved low temperature applicability Contains no lead or zinc Extreme pressure additives Sticks to wet joints Benefits Repeatable frictional characteristics High temp complex grease Resistance to make up downhole Not considered a marine pollutant Highly adhesive Specifications Base Materials: Anhydrous Calcium / Petroleum Friction / K-Factor: 1.15 (drill strings) Relative to API RP 7G, 1.40 (relative to API-Mod) Relative to API RP 5A3 Certifications: Not classified as marine pollutant - DOT Approval CA2004080025 View all