CM Shopstar 250lb 16fpm 115150 Electric Chain Hoist – 2070
$2,321.00
Bulk Orders
Competitive Pricing
Short Lead Times
Consolidated Shipping
Prompt Response
Request a Quote
The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist’s ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist’s Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C).
SPECIFICATION:
Rated Lift Capacity: 250_LB
Requested Lift Distance (ft): 10
Operating Voltage: 115V / 1 ph / 60 Hz
Maximum Lifting Speed: 16 ft/min (4.9 m/min)
Hoist Control Type: Single Speed Contactor in Pendant
HOIST BENEFITS & FEATURES:
H4 DUTY CYCLE – 300 motor starts per hour.
RUGGED & DURABLE – Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish.
LOW MAINTENANCE – Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination.
DUAL BRAKING SYSTEM – D.C. brake plus regenerative.
LONG CHAIN LIFE – Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear.
TRUE VERTICAL LIFT
NEMA 4 INDUSTRIAL-RATED CONTROL STATION
THE INDUSTRY’S BEST LIFETIME WARRANTY
OPTIONAL SWIVEL HOOK SUSPENSION.
CM ShopStar VS Brochure
CM ShopStar Brochure
CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA
Additional information
| Weight | 200 lbs |
|---|
Be the first to review “CM Shopstar 250lb 16fpm 115150 Electric Chain Hoist – 2070”
Related products
-
Yale Y80 1/2 Ton 35 fpm 25 ft Wire Rope Hoist – 80H.5-025S35-1
$11,824.00Yale Y80 Wire Rope Hoists are ideally suited for virtually any lifting application. Their modular design and versatility provide a wide range of capacities, lifts, hoist speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill. SPECIFICATIONS: Hoist Suspension Type: Hand-Geared Trolley Mounted Reeving Style: 2-Part Single Reeved Maximum Lifting Speed: 35 ft/min (10.7 m/min) Trolley Traverse Speed (60Hz): 0 Rated Lift Capacity: 1/2 U.S. ton Maximum Lifting Distance: 25 Operating Voltage: 460V / 3 ph / 60 Hz FEATURES and BENEFITS: Lug, Push, Geared or Motorized Trolley. Easily accessible control enclosure facilitates maintenance. D.C. disc motor brake for smooth braking action. High torque, heavy-duty hoist motor for smooth hoisting action. Block operated upper limit stop to limit upward hook travel. Convenient one-handed pushbutton control for easy operation of all motions. 115 volts at push button for operator safety. Push-button cable with built in strain reliever cable as used on single speed hoist applications (All others use a separate steel strain reliever cable.) The heavy-duty Y80 hoist is available as a single- or double-reeved unit and features a powerful drive motor and reliable dual braking. Improved plow steel pre-formed cable for maximum strength and life. Full swiveling, heat-treated forged an existing facility, reducing or steel hook with spring loaded latch. Shrouded lower block to help prevent pinched fingers. Alloy aluminum gear case and cover is lightweight yet rugged. Oil level plug permits easy inspection of oil level. Anti-friction bearings throughout for a long lasting hoist drive train. Positive action mechanical load lowering control brake, also acts as a part of the hoist holding brake system. Triple reduction helical/spur gearing operates in oil bath lube for maximum gearing life. Deep grooved, large diameter rope drum helps prevent rope mounting from an overhead structure, or with any of our overwrap for longer wire rope life Heavy welded steel frame ensures precise fit for long hoisting machinery life WR2234_Yale Y80 Brochure_Final Yale Y80 and 800 Series Drawings and Specifications Brochure Part #901590 - 18" Long 1" Square Tow Arm for Collector Festoon Dimensional Drawing -
Yale Y80 1 Ton 18 fpm 47 ft Wire Rope Hoist – 80H01-047D18-1
$20,670.00Yale Y80 Wire Rope Hoists are ideally suited for virtually any lifting application. Their modular design and versatility provide a wide range of capacities, lifts, hoist speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill. SPECIFICATIONS: Hoist Suspension Type: Hand-Geared Trolley Mounted Reeving Style: 2-Part Double Reeved Maximum Lifting Speed: 18 ft/min (5.5 m/min) Trolley Traverse Speed (60Hz): 0 Rated Lift Capacity: 1 U.S. ton Maximum Lifting Distance: 47 Operating Voltage: 460V / 3 ph / 60 Hz FEATURES and BENEFITS: Lug, Push, Geared or Motorized Trolley. Easily accessible control enclosure facilitates maintenance. D.C. disc motor brake for smooth braking action. High torque, heavy-duty hoist motor for smooth hoisting action. Block operated upper limit stop to limit upward hook travel. Convenient one-handed pushbutton control for easy operation of all motions. 115 volts at push button for operator safety. Push-button cable with built in strain reliever cable as used on single speed hoist applications (All others use a separate steel strain reliever cable.) The heavy-duty Y80 hoist is available as a single- or double-reeved unit and features a powerful drive motor and reliable dual braking. Improved plow steel pre-formed cable for maximum strength and life. Full swiveling, heat-treated forged an existing facility, reducing or steel hook with spring loaded latch. Shrouded lower block to help prevent pinched fingers. Alloy aluminum gear case and cover is lightweight yet rugged. Oil level plug permits easy inspection of oil level. Anti-friction bearings throughout for a long lasting hoist drive train. Positive action mechanical load lowering control brake, also acts as a part of the hoist holding brake system. Triple reduction helical/spur gearing operates in oil bath lube for maximum gearing life. Deep grooved, large diameter rope drum helps prevent rope mounting from an overhead structure, or with any of our overwrap for longer wire rope life Heavy welded steel frame ensures precise fit for long hoisting machinery life WR2234_Yale Y80 Brochure_Final Yale Y80 and 800 Series Drawings and Specifications Brochure Part #901590 - 18" Long 1" Square Tow Arm for Collector Festoon Dimensional Drawing -
Yale Y80 2 Tons 14 fpm 25 ft Wire Rope Hoist – 80H02-025D14-1
$15,762.00Yale Y80 Wire Rope Hoists are ideally suited for virtually any lifting application. Their modular design and versatility provide a wide range of capacities, lifts, hoist speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill. SPECIFICATIONS: Hoist Suspension Type: Hand-Geared Trolley Mounted Reeving Style: 2-Part Double Reeved Maximum Lifting Speed: 14 ft/min (4.3 m/min) Trolley Traverse Speed (60Hz): 0 Rated Lift Capacity: 2 U.S. Tons Maximum Lifting Distance: 25 Operating Voltage: 460V / 3 ph / 60 Hz FEATURES and BENEFITS: Lug, Push, Geared or Motorized Trolley. Easily accessible control enclosure facilitates maintenance. D.C. disc motor brake for smooth braking action. High torque, heavy-duty hoist motor for smooth hoisting action. Block operated upper limit stop to limit upward hook travel. Convenient one-handed pushbutton control for easy operation of all motions. 115 volts at push button for operator safety. Push-button cable with built in strain reliever cable as used on single speed hoist applications (All others use a separate steel strain reliever cable.) The heavy-duty Y80 hoist is available as a single- or double-reeved unit and features a powerful drive motor and reliable dual braking. Improved plow steel pre-formed cable for maximum strength and life. Full swiveling, heat-treated forged an existing facility, reducing or steel hook with spring loaded latch. Shrouded lower block to help prevent pinched fingers. Alloy aluminum gear case and cover is lightweight yet rugged. Oil level plug permits easy inspection of oil level. Anti-friction bearings throughout for a long lasting hoist drive train. Positive action mechanical load lowering control brake, also acts as a part of the hoist holding brake system. Triple reduction helical/spur gearing operates in oil bath lube for maximum gearing life. Deep grooved, large diameter rope drum helps prevent rope mounting from an overhead structure, or with any of our overwrap for longer wire rope life Heavy welded steel frame ensures precise fit for long hoisting machinery life WR2234_Yale Y80 Brochure_Final Yale Y80 and 800 Series Drawings and Specifications Brochure Part #901590 - 18" Long 1" Square Tow Arm for Collector Festoon Dimensional Drawing -
Yale Y80 1 Ton 28 fpm 34 ft Wire Rope Hoist – 80H01-034D28-1
$16,398.00Yale Y80 Wire Rope Hoists are ideally suited for virtually any lifting application. Their modular design and versatility provide a wide range of capacities, lifts, hoist speeds, and control options, making it possible to select the most efficient hoist for the job without wasted capacity or overkill. SPECIFICATIONS: Hoist Suspension Type: Hand-Geared Trolley Mounted Reeving Style: 2-Part Double Reeved Maximum Lifting Speed: 28 ft/min (8.5 m/min) Trolley Traverse Speed (60Hz): 0 Rated Lift Capacity: 1 U.S. ton Maximum Lifting Distance: 34 Operating Voltage: 460V / 3 ph / 60 Hz FEATURES and BENEFITS: Lug, Push, Geared or Motorized Trolley. Easily accessible control enclosure facilitates maintenance. D.C. disc motor brake for smooth braking action. High torque, heavy-duty hoist motor for smooth hoisting action. Block operated upper limit stop to limit upward hook travel. Convenient one-handed pushbutton control for easy operation of all motions. 115 volts at push button for operator safety. Push-button cable with built in strain reliever cable as used on single speed hoist applications (All others use a separate steel strain reliever cable.) The heavy-duty Y80 hoist is available as a single- or double-reeved unit and features a powerful drive motor and reliable dual braking. Improved plow steel pre-formed cable for maximum strength and life. Full swiveling, heat-treated forged an existing facility, reducing or steel hook with spring loaded latch. Shrouded lower block to help prevent pinched fingers. Alloy aluminum gear case and cover is lightweight yet rugged. Oil level plug permits easy inspection of oil level. Anti-friction bearings throughout for a long lasting hoist drive train. Positive action mechanical load lowering control brake, also acts as a part of the hoist holding brake system. Triple reduction helical/spur gearing operates in oil bath lube for maximum gearing life. Deep grooved, large diameter rope drum helps prevent rope mounting from an overhead structure, or with any of our overwrap for longer wire rope life Heavy welded steel frame ensures precise fit for long hoisting machinery life WR2234_Yale Y80 Brochure_Final Yale Y80 and 800 Series Drawings and Specifications Brochure Part #901590 - 18" Long 1" Square Tow Arm for Collector Festoon Dimensional Drawing
Reviews
There are no reviews yet.