CM Lodestar XL Electric Chain Hoist
Bulk Orders
Competitive Pricing
Short Lead Times
Consolidated Shipping
Prompt Response
Request a Quote
The CM Lodestar XL Electric Chain Hoists features a heavy-duty design with faster speeds, less reeving, and higher capacities than traditional hoists.
FEATURES and BENEFITS:
Standard Features
Lifting capacities up to 7-1/2 tons. Double reeved units with 3-5 ton lifting capacities. Maximum lifting speed of 30 feet per minute.
Long Life and Smooth Operation
Forged ten-pocket oblique-lay liftwheel for smooth chain operation, constant chain speed, and reduced chain wear. Gearing operated in oil bath for increased lifting life and quiet operation.
Designed with Safety in Mind
Heavy-duty, multiple disc braking system. Rated H-4, heavy-duty. Standard overload protector. Screw-type limit switches. Thermally protected motor. Factory tested at 125% of rated capacity. Made in U.S.A.
CM Lodestar XL Brochure
CM Lodestar XL Manual
192106941 Lodestar XL Manual Supplement Rev AA
CM Lodestar XL Electric Chain Hoist 2024 52756-F
Additional information
| Weight | 200 lbs |
|---|
Related products
-
CM Shopstar 500 lb 8 fpm 115160 Electric Chain Hoist – 2095
$2,715.00The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA -
CM Shopstar 300lb 16FPM 230360 Electric Chain Hoist – 2026
$2,845.00The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 300_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA -
CM Shopstar 250lb 16fpm 115150 Electric Chain Hoist – 2070
$2,321.00The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 250_LB Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA -
CM Shopstar 300 lb 16 fpm 115160 Electric Chain Hoist – 2047
$2,586.00The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 300_LB Requested Lift Distance (ft): 10 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA