Lubriplate L0973-060 Syn Lube 100 – Pail (5 gl)

LUBRIPLATE SYN LUBE ISO VG Fluids 22 through 100 are high performance, zinc-free synthetic fluids for industrial machine applications. These fluids are 100% synthetic based products formulated with a combination of PAO and ester technology.

ADVANTAGES

LUBRIPLATE SYN LUBE Synthetic Fluids provide several advantages over mineral oil based products.

ENERGY SAVINGS

• SYN LUBE Synthetic Fluids exhibit high viscosity indexes, excellent lubricity, very low coefficients of friction and superior heat transfer characteristics, resulting in lower operating temperatures and lower power consumption

EXTENDED DRAIN INTERVALS

• Excellent thermal and oxidation stability characteristics increase the service life of the lubricant many times over that of petroleum oils
• Provide outstanding water demulsibility allowing for any water that may have entered the system to be rapidly separated from the SYN LUBE Synthetic Fluids. The water can then be easily drained and emulsion problems can be averted
• Generally, intervals of 8,000 hours of compressor fluid service can be achieved, depending on operating conditions. LUBRIPLATE Division encourages the use of our Free Oil Analysis Program to determine the extended drain interval

FLUID/MATERIAL COMPATIBILITY

• SYN LUBE Synthetic Fluids are compatible with mineral oil products avoiding time- consuming flushing procedures and allowing conversion to be simplistic. Always consult LUBRIPLATE prior to conversion if compatibility is an issue.
• SYN LUBE Synthetic Fluids are recommended for use with high Nitrile Buna-N, Teflon, Viton, Fluorosilicone and Polysulfide elastomers. These fluids are not recommended for use with low Nitrile Buna-N, Neoprene or natural rubber

Data Sheet