FT1012L – GEARENCH FLANGE ALIGNING TOOL

TX Series Low Profile Hydraulic Torque Wrench The Flattest And Most Tight Fitting Hydraulic Bolting Tool In The Industry The TX series is the "go-to" wrench when standard industrial torque tools are limited by size in their ability to engage the fastener. The TX eliminates issues around the nut, behind the nut and above the nut. On applications with extended stud protrusion, the TX easily slips over to get the torque applied with an accuracy of +/-3%. Made In USA Seven Models From 45 Ft/Lbs to 47,380 Ft/Lbs Every Unit Calibrated In ISO17025 Laboratory Manufactured With AQ Certified Alloys Genuine TorcUP Design Features Patented “Peanut-Shaped” Piston This feature allows the cylinder and ratchet link to be the same width. Friction reducing sliders prevent wear on the piston. Dual Independent Swivels The unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points. Hex Link Cassettes Each link is fitted with steel alignment pins connecting the lower reaction area for added strength. No Drip Quick Connect Couplers These 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation. Cylinder and Link Material Both cylinder and link are manufactured from 4340 Aircraft Quality high strength steel alloy. Nose Radius Tight nose radius allows this tool to fit in applications where clearance constraints make other tools too bulky. In-Line Reaction Pad This design ensures torsion-free reaction every time. Link Pin One pin for link to cylinder engagement - no tool required for swapping ratchet links.

TU SERIES Square Drive Hydraulic Torque WrenchThe Most Durable and Uncomplicated Hydraulic Bolting Tool In The IndustryThe TU Series is a dependable workhorse, strong enough to conquer demanding applications with an accuracy +/- 3%. The TU can handle those ultimate applications where the work subjects tools to brutal and unforgiving usage. The TU Square Drive Hydraulic Torque Wrench is the wrench you can rely on when the critical work must get done right…the first time! Made In USA Eight Models From 127 Ft/Lbs to 58,000 Ft/Lbs.Every Unit Calibrated In ISO17025 LaboratoryManufactured With AQ Certified AlloysGenuine TorcUP DesignFeaturesPatented Mono-Body HousingThis feature is a TorcUP exclusive. The TU Series housing is machined from a single block of 7075 AQ Aluminum, which reduces torsion and flex on the body of the tool under pressure.Dual Independent SwivelsThe unique swivel design allows for 360 degree by 360 degree independent movement of the hoses to avoid any and all reaction points.Push-Through DriveThe push-through square drive allows the user to switch easily from loosen to tighten without having to remove the drive.Steel Reaction BootThis feature protects the main reaction point of the arm and is field replaceable.Laser Engraved Torque ChartThe dual sided shroud is laser engraved with the torque chart for the TU Series, preventing lost charts during use.Reaction Arm Release ButtonThe release button for the reaction arm is set within the arm as a safety feature, protecting the arm from accidental disengagement.Multi-Tooth Drive SegmentThis design ensures a 27 degree stroke each time the tool fully advances.No Drip Quick Connect CouplersThese 3:1 rated safety couplers are designed for simple engagement. The coupler collar ensures safe operation.