Coffing JLC 1/4 Ton 32 fpm 15 ft Electric Chain Hoist – 08214W
$4,218.25
Bulk Orders
The JLC is engineered and built for the heavy-duty demands of industrial applications. Compact in size but big on features, the JLC boasts a multiple disc motor brake, overload clutch, and chain end stop for safety.
SPECIFICATIONS:
Rated Lift Capacity: 1/4 U.S. ton
Requested Lift Distance (ft): 15
Operating Voltage: 115V / 1 ph / 60 Hz
Maximum Lifting Speed: 32 ft/min (9.8 m/min)
FEATURES and BENEFITS:
CAPACITY
1 ton
EASY ACCESS FOR MAINTENANCE
Panel plate provides easy access to controls and motor leads for changing voltage on dual-voltage motors or servicing the hoist. Connection wires are numbered to assist with maintenance.
HEAVY-DUTY MOTOR BRAKE
Multiple disc motor brake with direct acting design for positive load spotting and holding.
SMOOTHER LIFTING and REDUCED CHAIN WEAR
5-pocket load sheave increases chain and sheave engagement 25% over hoists with conventional 4-pocket sheaves. Provides smoother lifting and reduces chain wear.
ADJUSTABLE LIMIT SWITCHES
Regulate upper and lower load travel. Brass nuts standard for improved switch setting and repeatability. Stainless steel limit switch shaft standard.
GUARDS AGAINST UNSAFE LOADING
Mechanical overload protection device protects hoist, operator and supporting structures from damaging overloads, chain jamming, and reverse phasing.
TWO-SPEED HOIST MODELS
Optional with 3:1 speed ratio, 3-phase, single voltage only.
LONGER and QUIETER OPERATION
Oil bath transmission and precision machined alloy steel gears for longer, quieter operation.
NEMA 3R PUSH BUTTON STATION
Ergonomic design fits operator’s hand for thumb or two-handed operation standard. 24V Control for operator safety. 115V Control available upon request.
COMPACT ALUMINUM FRAME
Housing designed for portability and ease of installation.
STANDARD CHAIN CONTAINER
Durable chain container is standard on lifts up to 20 ft. single chain and 10 ft. double chain.
OPTIONAL VFD
Variable frequency drive option is available in U.S. only.
LIFETIME WARRANTY
MADE IN THE USA
Coffing JLC Manual
Coffing JLC Electric Chain Operations Manual
Coffing JLC Series Electric Hoist Parts Breakdown
Coffing JLC Series Quick Start Guide
Coffing JLCMT Series Electric Hoist Operations Manual
Coffing JLC Electric Chain Hoist Technical Bulletin
Coffing JLC Brochure (English)
Coffing JLC Series Electric Hoist Operations Manual
Coffing JLC Series Electric Hoist 2008 JLC680 1
Coffing JLC Series Electric Hoist 2011 Sept JLC680 1
Coffing- JLCMT Manual
Coffing SLC Series Electric Hoist 2005 April 620 A
Additional information
| Weight | 200 lbs |
|---|
Related products
-
CM Shopstar 600 lb 8 fpm 115160 Electric Chain Hoist – 2005
$3,529.00The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 600_LB Requested Lift Distance (ft): 20 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 8 ft/min (2.4 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA -
CM Shopstar 500 lb 16 fpm 230360 Electric Chain Hoist – 2080
$3,463.00The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 500_LB Requested Lift Distance (ft): 10 Operating Voltage: 230V / 3 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) Hoist Control Type: Single Speed HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA -
CM Shopstar 300 lb 16 fpm 115160 Electric Chain Hoist – 2002
$2,467.75The CM Shopstar electric chain hoist is built for rugged industrial and commercial use. This durable hoist features high H4 duty cycles and a compact design ideal for use at workstations and production lines. Standard overload device protects the hoist, operator and surrounding structure from damaging overloads. The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). SPECIFICATION: Rated Lift Capacity: 300_LB Requested Lift Distance (ft): 15 Operating Voltage: 115V / 1 ph / 60 Hz Maximum Lifting Speed: 16 ft/min (4.9 m/min) Hoist Control Type: Single Speed Contactor in Pendant HOIST BENEFITS & FEATURES: H4 DUTY CYCLE - 300 motor starts per hour. RUGGED & DURABLE - Thermally protected hoist motor. Cast aluminum alloy hoist frame with durable epoxy powder coat finish. LOW MAINTENANCE - Gear train lifetime lubricated with non-oxidizing grease. A totally enclosed hoist frame protects motor from environmental contamination. DUAL BRAKING SYSTEM - D.C. brake plus regenerative. LONG CHAIN LIFE - Durable CM Hoist Alloy Load Chain. 10-pocket, oblique-lay lift wheel for longer chain wear. TRUE VERTICAL LIFT NEMA 4 INDUSTRIAL-RATED CONTROL STATION THE INDUSTRY’S BEST LIFETIME WARRANTY OPTIONAL SWIVEL HOOK SUSPENSION. CM ShopStar VS Brochure CM ShopStar Brochure CM ShopStar VS Electric Chain Hoist 2016 August 10001928 Rev AA -
CM Lodestar NH 1/4 Tons 16 fpm 10 ft Electric Chain Hoist – LV02161D103VA
$4,671.00The Lodestar, which features an eco-friendly design, offers quieter operation, easier access to components, more intensive duty cycles, less maintenance and improved safety features. SPECIFICATIONS: The Hoist's ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc). Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor. Special provisions should be made to ventilate the space and/or shield the Hoist from radiation. Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C). Reference the Hoist's Operation and Maintenance Manual. Contact factory for requests below 0°F (-17°C). Hoist Control Type: Variable Speed Drive Rated Lift Capacity: 1/4 metric tonnes Operating Voltage: 115V / 1 ph / 60 Hz Requested Lift Distance (ft): 10 Maximum Lifting Speed: 16 ft/min (4.9 m/min) Model: B Hoist Suspension Type: Hook Mounted FEATURES and BENEFITS: LESS MAINTENANCE and EASIER INSPECTION Heavy Duty DC Brake is designed for a long service life. Brake location allows for quick access and easy inspection. Lifetime grease-lubricated Gear Box means no oil change out is required. Precision gears provide better wear and longer life. Clutch located outside the Gear Box allows for easy access which eliminates the need for complete disassembly and reduces downtime. IMPROVED SERVICEABILITY Easy access to the Clutch, Motor, Electrical Control Panel and Brake Assembly. LONGER SERVICE LIFE Lifetime grease-lubricated Gear Box and helical gearing ensures efficient operation. Heavy duty rated motors. Hoist workmanship backed by a lifetime warranty. QUIETER OPERATION 80% reduction in sound pressure as compared to the classic Lodestar. IMPROVED LOAD SAFETY Clutch is located outside the load path which prevents slipping of the load in an overload condition when brake is not powered. IMPROVED CHAIN LIFE 5-Pocket Lift Wheel provides better chain and lift wheel engagement for smoother lifting and reduced vibration which equates to less wear and a longer chain life. Load Chain is designed and manufactured in the USA by Columbus McKinnon. Star Grade chain is zinc plated to protect against corrosion. 2-ton, single-reeved units feature 10 mm load chain as standard. EASY ACCESS CONTROL PANEL With finger-safe wiring and plug and play connectors, the Control Panel allows for quick voltage change (except Lodestar VS), access to terminal strips and simple fuse installation. EXCEEDS H4 REQUIREMENTS Exceeds H4 requirements, engineered for high duty cycles and the toughest applications ECO-FRIENDLY Lifetime grease-lubricated Gear Box means no changing and disposing of hazardous oil Documented RoHS compliance Shipped in boxes made of recycled material FABRIC CHAIN CONTAINER AND RIGID HOOK SUSPENSION STANDARD LIFETIME WARRANTY METRIC RATED CSA APPROVED (EXCEPT LODESTAR VS) MADE IN THE USA OPTIONS: Double DC Brake - Two independent acting DC Brakes for redundant braking. Field Installation Kit available. AC Electrical Brake Variable speed drive (VFD) or traditional 2 speeds available Primary and secondary transformer fusing Rotatable limit switch - Designed for quick reset of limit position Metal and stainless steel chain containers PHPL-0924 Powered Hoists Trolleys and Crane Kits v1 CMPARTS-0724 CM Parts List Lodestar NH Adjustable Clutch Wiring Diagrams CM Lodestar NH Brochure CM Lodestar Operations Manual 2020 Lodestar NH – Wiring Diagram Lodestar NH – Parts Breakdown List