3M™ 2076HF P95 Filter For 5000, 6000, 6500, 7000 And FF-400 Series Respirators
Bulk Orders
3M™ Cartridge is used to give protection against oil and non-oil based particulate contaminants, hydrogen fluoride and nuisance levels of acid gases. This cartridge is compatible with 5000, 6000 and 7000 series air purifying respirator with nuisance level acid gas relief. It is used in a variety of applications namely aluminum processing for concentrations up to 10 times and 50 times the permissible exposure limit with half Facepieces and full Facepieces respectively. Cartridge made of unique flexible material makes it to be worn in close quarters and its rugged design resists abrasion and wetting. This cartridge with 95% of filter efficiency is lighter and easier to breathe through than cartridge/filter combinations.
Features
- P-Series filter intended for removal of any particle including oil-based liquid aerosols
- The uniquely designed 2076HF cartridge is lighter and easier to breathe through than cartridge/filter combinations
- Versatile protection, comfort, economy, simplicity, compatibility, durability
- The 2076HF is well suited for a wide range of oil and non-oil based particulate contaminants, hydrogen fluoride and nuisance levels of acid gases
- The 2076HF is attractively priced in comparison to filter/cartridge combinations
- With the versatility this P-series filter provides, your inventory and training requirements are reduced
- The design makes the product easy for workers to use
- The 2076HF can be used with 3M’s wide variety of half and full facepieces
- Unique flexible filter material enables the product to be worn in close quarters
- Its rugged construction resists abrasion and wetting
Benefits
At least 95% filter efficient when tested with -0.3 um DOP (Dioctyl Phthalate) aerosol 3M makes replaceable filters and filtering facepiece respirators in this category
Specifications
- NIOSH 42 CFR84
Applications
- Aluminum processing
- Liquid or oil based particles from sprays that do not also emit harmful vapors
- Metal fumes produced from welding, brazing, cutting and other operations involving heating of metals
- Hydrogen fluoride gas up to 10 times PEL
- Acid gases such as sulfur dioxide and/or Chlorine below the OSHA PEL or applicable government standards, whichever is lower
Caution
Do Not Use For: Gases and vapors other than Hydrogen Fluoride, when concentrations exceed the OSHA PEL, or applicable government standards, whichever is lower, including those present in paint spray operations, unless combined with approved chemical cartridges. Asbestos. Sandblasting. This respirator cartridge does not supply oxygen. Concentrations that exceed 10 times the OSHA PEL with a half facepiece, or 50 times the PEL with a full facepiece when quantitatively fit tested, or applicable government regulations, whichever is lower.
Product Attributes
Respirator Type
» 5000 Series » 6000 Series » 6500 Series » 7000 Series » FF-400 Series
Safety Product Type
» Filter
Related products
-
3M™ N95 Filter For 5000 And 6000 Series Respirators (10 Per Package)
-
3M™ Speedglas™ PAPR High Efficiency Replacement Pre-Filter For Adflo™ Respirators (12 Each Per Case)
-
3M™ Medium Thermoplastic Elastomer Full Face 6000 Series Reusable Respirator With 4 Point Harness And Bayonet Connection
-
3M™ Organic Vapors/Particulate P100 APR Cartridge