Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant

Price range: $405.56 through $4,121.93

Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant provides outstanding wear protection for critical hydraulic systems, air compressors, and pneumatic equipment. With an ultra-high viscosity index and low pour point, it provides consistent performance at both high and low temperatures. Its superior oxidation resistanc

Grade

Pack size

Clear

SKU: N/A

Manufacturer:

Hydrotex

Bulk Orders

Competitive Pricing

Short Lead Times

Consolidated Shipping

Prompt Response

Request a Quote

What is Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant?

Why choose Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant?

Outstanding wear protection
Defends against rust and corrosion
Ultra-high viscosity index
Low pour point
Formulated for long drain intervals
Excellent demulsibility
Superior ISO 4406 cleanliness
Available in ISO 22 & 32

Where is Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant used?

Food Processing Equipment
Hydraulic Systems
Air Compressors
Drip Lubrication Systems
High Speed Bearings
Vacuum Pumps
Rust Prevention Spray & Coatings
Pneumatic Tools

Which specifications does Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant meet?

ASTM D6158 HMHP
Bosch Rexroth RE 90220
DIN 51506 VBL
DIN 51506 VDL (ISO 32)
DIN 51524-2 HLP
Danfoss 520L0463
Denison HF-0 (ISO 32)*
Eaton E-FDGN-TB002-E*
Fives Cincinnati P-68 (ISO 32)*
H1 Registered
ISO 11158 HM
ISO 22
ISO 4406 cleanliness
NSF Nonfood

Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant technical specifications

Property	Test method	ISO 22	ISO 32
ISO Grade	ASTM D2422	22	32
Kinematic Viscosity, cSt @ 40°C	ASTM D445	22.6	32
Kinematic Viscosity, cSt @ 100°C	ASTM D445	4.69	6.04
Viscosity Index	ASTM D2270	128	138
Flash Point, °F (°C)	ASTM D92	448 (231)	469 (243)
Pour Point, °F (°C)	ASTM D97	-65 (-54)	-54 (-48)
Density, g/ml @ 15.5°C	ASTM D1298	0.8483	0.8534
Density, lb/gal @ 60°F	ASTM D1298	7.08	7.12
Color	ASTM D1500	0.5	—
4-Ball EP, Weld Point, kgf	ASTM D2596	200	200
4-Ball Wear, scar diameter, mm	ASTM D2266	.38	.38
FZG Scuffing, A/8.3/90, Fail Stage	ASTM D5182	—	12+
Copper Corrosion, 3 hr @ 121°C	ASTM D130	1B	1B
Rust Test, Distilled Water	ASTM D665A	Pass	Pass
Rust Test, Syn. Sea Water	ASTM D665B	Pass	Pass
Air Release, min @ 50°C	ASTM D3427	3.3	5
Fire Point, °F (°C)	ASTM D92	556 (291)	556 (291)
Fluid Cleanliness	ISO 4406	16/14/11 or cleaner	—
Foam, Blow/Settle ml/ml, Seq. I, II, III	ASTM D892	0/0, 0/0, 0/0	—
ISO 21469 Certified	—	✓	✓
NSF NFC Registration Number	—	159924	159925
PDSC Oxidation Induction Time, min @ 180°C	ASTM D6186	120+	—
RPVOT Oxidation Stability, min	ASTM D2272	525+	—
TOST Oxidation Stability, hrs	ASTM D943	10000+	—
V104C Vane Pump Wear, wt. loss ring, mg	—	60	<60
V104C Vane Pump Wear, wt. loss vanes, mg	ASTM D7043	3.6	<3.6
Water Separability, min @ 54°C	ASTM D1401	10	10

Which pack sizes are available?

Part number	Grade	Pack size	Unit
5710-022-2	ISO 22	55 Gal	Drum
5710-022-6	ISO 22	6/1 Gal	Case
5710-022-8	ISO 22	5 Gal	Pail
5710-032-2	ISO 32	55 Gal	Drum
5710-032-6	ISO 32	6/1 Gal	Case
5710-032-8	ISO 32	5 Gal	Pail

Is Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant hazardous to handle?

Not classified as hazardous under GHS criteria. Land transport (DOT): Not Regulated for Land Transport. Consult the safety data sheet before use.

How do I order Hydrotex Ultra-Kleen™ XPL Low Viscosity Food Grade Lubricant?

The list price for each pack is shown on this page. Ordered by quote: 55 Gal – shipping for these packs is quoted per order, so send us the part number from the pack table above and we will confirm the delivered price. Add to cart: 6/1 Gal and 5 Gal – pick the grade and pack size and check out directly. A grade or pack that is not listed is quoted the same way.

5710-022 SDS
5710-032 SDS
TDS