Hydrotex Energy Saving Blower Oil

Price range: $379.22 through $3,799.16

Energy Saving Lubricant Energy Saving Blower Oil is an anti-wear, multi-functional hydraulic and industrial lubricant. Recommended for all hydraulic gear, vane and piston pumps that must operate over a wide temperature range. Improves both mechanical and volumetric efficiency of hydraulic systems to reduce frictional l

Grade

Pack size

Clear

SKU: N/A

Manufacturer:

Hydrotex

Bulk Orders

Competitive Pricing

Short Lead Times

Consolidated Shipping

Prompt Response

Request a Quote

What is Hydrotex Energy Saving Blower Oil?

Why choose Hydrotex Energy Saving Blower Oil?

Protects blower gears and bearings against wear
High viscosity index maintains oil film thickness at elevated temperatures for better wear protection
Superior resistance to oxidation and thermal breakdown
Long oil life extends service intervals for less downtime*
Excellent low temperature fluidity for easy start-ups
Improves gear set efficiency to save energy
Available in ISO 100, 150, 220 & 320
Improve Reliability

Where is Hydrotex Energy Saving Blower Oil used?

Blowers
Heavy Viscosity Circulating Oils
Non-EP Geasr Oils

Which specifications does Hydrotex Energy Saving Blower Oil meet?

ISO 100
ISO 220

Hydrotex Energy Saving Blower Oil technical specifications

Property	Test method	ISO 100	ISO 150	ISO 220	ISO 320
ISO Grade	ASTM D2422	—	150	220	—
Kinematic Viscosity, cSt @ 40°C	ASTM D445	—	150	220	—
Kinematic Viscosity, cSt @ 100°C	ASTM D445	—	19.5	25.9	—
Viscosity Index No.	ASTM D2270	—	148	149	—
Flash Point, °F (°C)	ASTM D92	—	446 (230)	459 (237)	—
Pour Point, °F (°C)	ASTM D97	—	Confirmation pending	Confirmation pending	—
Density, g/mL @ 15.6°C	ASTM D1298	—	0.857	0.860	—
Density, lb/gal @ 60°F	ASTM D1298	—	7.15	7.18	—
Color	ASTM D1500	—	<0.5	<0.5	—
FZG Fail Stage, A/8.3/90	ASTM D5182	—	11	11	—
Copper Corrosion	ASTM D130	—	1a	1a	—
Rust Test, Distilled Water	ASTM D665A	—	Pass	Pass	—
Rust Test, Syn. Sea Water	ASTM D665B	—	Pass	Pass	—
Foaming Test, Seq. I, II, and III	ASTM D892	—	Pass	Pass	—
Demulsibility, oil-water-emulsion (min)	—	—	40/40/0 (10)	40/40/0 (10)	—
Denison Hybrid Pump Phase I & II	—	—	Pass	Pass	—
Dielectric Breakdown Voltage	ASTM D877	—	45kV	45kV	—
Dry Filterability Stage 1 & II	ISO 13357-2	—	Pass	Pass	—
Eaton 35VQ25A Pump Test	ASTM D6973	—	Pass	Pass	—

Which pack sizes are available?

Part number	Grade	Pack size	Unit
2251-100-2	ISO 100	55 Gal	Drum
2251-100-6	ISO 100	6/1 Gal	Case
2251-100-8	ISO 100	5 Gal	Pail
2251-150-2	ISO 150	55 Gal	Drum
2251-150-6	ISO 150	6/1 Gal	Case
2251-150-8	ISO 150	5 Gal	Pail
2251-220-2	ISO 220	55 Gal	Drum
2251-220-6	ISO 220	6/1 Gal	Case
2251-220-8	ISO 220	5 Gal	Pail
2251-320-2	ISO 320	55 Gal	Drum
2251-320-8	ISO 320	5 Gal	Pail

Is Hydrotex Energy Saving Blower Oil hazardous to handle?

signal word WARNING; Skin irritation – Category 2; Eye irritation – Category 2B. Land transport (DOT): Not Regulated for Land Transport. Consult the safety data sheet before use. No safety data sheet has been supplied for ISO 100, ISO 320, so neither the classification nor the transport status above covers them – ask us for the sheet before ordering those grades.

How do I order Hydrotex Energy Saving Blower Oil?

The list price for each pack is shown on this page. Ordered by quote: 55 Gal – shipping for these packs is quoted per order, so send us the part number from the pack table above and we will confirm the delivered price. Add to cart: 6/1 Gal and 5 Gal – pick the grade and pack size and check out directly. A grade or pack that is not listed is quoted the same way.

2251-150 SDS
2251-220 SDS
TDS