Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant

Price range: $272.30 through $15,181.47

Hydrotex Multi-Film™ gear lubricant is formulated to meet the most demanding requirements found in enclosed gear systems. This multi-service and all-season fluid provides the extreme-pressure and wear protection for the severe service conditions commonly found in hypoid differentials, non-synchronous manual transmissio

Grade

Pack size

Clear

SKU: N/A

Manufacturer:

Hydrotex

Bulk Orders

Competitive Pricing

Short Lead Times

Consolidated Shipping

Prompt Response

Request a Quote

What is Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant?

Why choose Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant?

Outstanding anti-wear and extreme pressure protection prevents welding and scoring associated with shock loads
Protects metal surfaces from water and contaminants
Long lasting for extended drains
Prevents sludging and oil/water emulsions
Minimal foaming for cooler operation and better protection
Available in SAE 80W-90 & 80W-140
Improve Reliability
Increase Uptime

Where is Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant used?

Differentials
Hypoid Gears
Final Drives
HD Manual Transmissions
Automotive Gears
Speed Reducers
Oiled Wheel Bearings
EP Industrial Gears
Steel Worm Gears
API GL-5
API MT-1
Meritor 0-76-B
SAE J2360
MIL-PRF-2105E
Meritor 0-76-Q/R
Mack GO-J

Which specifications does Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant meet?

API CK-4
SAE 80W-90

Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant technical specifications

Property	Test method	SAE 80W-90	SAE 80W-140
ISO Grade	ASTM D2422	—	320
SAE Grade	SAE J306	80W-90	80W-140
Kinematic Viscosity, cSt @ 40°C	ASTM D445	161.4	302
Kinematic Viscosity, cSt @ 100°C	ASTM D445	17.5	27.2
Viscosity Index No.	ASTM D2270	119	119
Flash Point, °F (°C)	ASTM D92	381 (194)	408 (209)
Pour Point, °F (°C)	ASTM D97	-27.4 (-33)	-11 (-24)
Density, kg/l @ 15.5°C	ASTM D1298	0.878	0.888
4-Ball EP, Weld Point, kgf	ASTM D2596	500	500
4-Ball Wear, scar diameter, mm	ASTM D4172	0.39	0.41
Rust Test, Distilled Water	ASTM D665A	Pass	Pass
Rust Test, Syn. Sea Water	ASTM D665B	Pass	Pass
ASTM Color	ASTM D1500	1.5	1.5
Copper Strip Corrosion, 100°C, 3 hr	ASTM D130	1a	1a
Fire Point, °F (°C)	ASTM D92	430 (221)	462 (239)
Load Wear Index	ASTM D2596	83	83
PDSC Oxidation Induction Time, min @ 185°C	ASTM D5483	110	110

Which pack sizes are available?

Part number	Grade	Pack size	Unit
0020-80140-1	SAE 80W-140	275 Gal	Tote
0020-80140-2	SAE 80W-140	55 Gal	Drum
0020-80140-5	SAE 80W-140	16 Gal	Drum
0020-80140-6	SAE 80W-140	6/1 Gal	Case
0020-80140-8	SAE 80W-140	5 Gal	Pail
0020-8090-1	SAE 80W-90	275 Gal	Tote
0020-8090-2	SAE 80W-90	55 Gal	Drum
0020-8090-5	SAE 80W-90	16 Gal	Drum
0020-8090-6	SAE 80W-90	6/1 Gal	Case
0020-8090-8	SAE 80W-90	5 Gal	Pail

Is Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant hazardous to handle?

No safety data sheet has been supplied for SAE 80W-140, SAE 80W-90, so no hazard classification or transport status is stated here – ask us for the sheet before ordering those grades.

How do I order Hydrotex Multi-Film™ Hydrosynthetic® Gear Lubricant?

The list price for each pack is shown on this page. Ordered by quote: 55 Gal and 275 Gal – shipping for these packs is quoted per order, so send us the part number from the pack table above and we will confirm the delivered price. Add to cart: 6/1 Gal, 5 Gal and 16 Gal – pick the grade and pack size and check out directly. A grade or pack that is not listed is quoted the same way.

0020-8090 SDS
0020-80140 SDS
TDS