Deacon 427 Two-Part Epoxy – Resin Pours / Void Fill

What is the Deacon 427 Two-Part Epoxy – Resin Pours / Void Fill?

Pourable epoxy system designed for void fill applications. Fully cures at room temperature (65ºF to 70ºF / 18ºC to 21ºC) in 24 hours. Product will harden at room temperature in 6-8 hours. Heat curing is also an option for a faster set up time and to further increase temperature resistance. Available in Liquid or Fiber Mix. Not recommended if leak is active or can't be stopped.

What are the specifications of the 427 Two-Part Epoxy – Resin Pours / Void Fill?

• Service Rating Up to 400ºF (204ºC)
• Quarts, Gallons

What are the characteristics of the 427 Two-Part Epoxy – Resin Pours / Void Fill?

• Leak must be inactive or stop-gapped before pouring
• Unsurpassed chemical resistance
• Cures to a strong, hard, corrosion resistant solid

Where is the 427 Two-Part Epoxy – Resin Pours / Void Fill used?

• Void fill pours, Concrete stabilization, Corrosion resistance, Caustics, Acids, Fuels, Solvents. Not recommended on oxidizers.

Which Deacon 427 Two-Part Epoxy – Resin Pours / Void Fill do I order?

• 427 Epoxy Fiber Part 1 Quart: part number 111-427-PT1F QUART
• 427 Epoxy Liquid Part 1 Quart: part number 111-427-PT1L QUART
• 427 Epoxy Fiber Part 2 Quart: part number 111-427-PT2F QUART
• 427 Epoxy Liquid Part 2 Quart: part number 111-427-PT2L QUART
• 427 Epoxy Fiber Part 1 Gallon: part number 111-427-PT1F GALLON
• 427 Epoxy Liquid Part 1 Gallon: part number 111-427-PT1L GALLON
• 427 Epoxy Fiber Part 2 Gallon: part number 111-427-PT2F GALLON
• 427 Epoxy Liquid Part 2 Gallon: part number 111-427-PT2L GALLON

How does this grade compare with the rest of the Deacon range?

Across the 55 Deacon injectable sealants and compounds PE Energy stocks, this one is rated Up to 400°F (204°C). That places it above 1 of the other 54 on upper service temperature: 404 & 404-L Two-Part Rubber stops at 230°F, and 460 Injectable Rubber continues to 450°F.

The limit that decides whether this grade is the right one rather than the one next to it is stated by the manufacturer: Leak must be inactive or stop-gapped before pouring.

Deacon publishes these ratings one product page at a time, so the comparison above is the part that is hard to assemble before you order. If your service condition sits near a boundary, send us the temperature and the medium with your enquiry and we will confirm the grade against the 2026 manufacturer catalogue before quoting.

How do I order or get a quote?

PE Energy supplies the Deacon 427 Two-Part Epoxy – Resin Pours / Void Fill from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time.