Deacon 103-P Accelerator

What is the Deacon 103-P Accelerator?

Will accelerate cure of heat reactive compounds to aid in achieving a seal in situations of lower temperatures. Must be used in conjunction with heat (a minimum of 150ºF/ 65ºC). Not recommended above 600ºF (316ºC). Unlimited shelf-life. Mix Ratio: (1 tablespoon or 16 grams) per J-Stick, (2 oz. or 62 grams) per quart, (1/2 lb. or .22 kg) per Gallon. Mix ratio recommendations are general, does not have to be exact to achieve a quicker cure.

What are the specifications of the 103-P Accelerator?

• Service Rating 150ºF (65ºC) to 600ºF (316ºC)
• Quarts, Gallons

What are the characteristics of the 103-P Accelerator?

• 75%+ Faster cure
• Granular powder consistency

Where is the 103-P Accelerator used?

• Used to speed up the cure rate of Deacon resin based thermo-setting compounds.

Which Deacon 103-P Accelerator do I order?

• 2 oz.: part number 111-103-P 2 OZ
• Pint: part number 111-103-P PINT
• Quart: part number 111-103-P QUART
• Gallon: part number 111-103-P GALLON

How does this grade compare with the rest of the Deacon range?

Across the 55 Deacon injectable sealants and compounds PE Energy stocks, this one is rated 150°F (65°C) to 600°F (316°C). That places it above 18 of the other 54 on upper service temperature: Pour-Shield™ Rubber Compound stops at 550°F, and 402-XT Rubber Compound continues to 700°F.

Deacon publishes these ratings one product page at a time, so the comparison above is the part that is hard to assemble before you order. If your service condition sits near a boundary, send us the temperature and the medium with your enquiry and we will confirm the grade against the 2026 manufacturer catalogue before quoting.

How do I order or get a quote?

PE Energy supplies the Deacon 103-P Accelerator from the 2026 manufacturer catalogue. Order the part number for the option you need, or send us the part number with your application details and we return pricing and lead time.