Lubriplate L0132-038 Lithium Brick Grease – Case of 12

LUBRIPLATE Lithium Brick Grease is recommended to meet the lubrication requirements of open slot or open well type bearings where the brick grease rides directly on the bearing shaft. The rotating motion of the bearing shaft wipes a film of lubricant onto the bearing surfaces keeping it properly lubricated.

APPLICATIONS

Applications for LUBRIPLATE Lithium Brick Grease are commonly found at rock quarries and paper mills.

ADVANTAGES

LUBRIPLATE Lithium Brick Grease comes 12 Bricks per Case. These Bricks are easily cut into smaller pieces to place in the bearing opening. The size of the piece should be small enough to allow freedom of movement of the block while riding on the bearing surface. From time to time, it is also a good practice to turn or rotate these pieces. Also, do not over load or over pack the bearing opening or slot.

STORAGE RECOMMENDATIONS

• Products should be stored between 40°F-120°F
• Products should be stored in a dry covered environment
• Products should not be stored in warm, direct sunlight
• Improper storage conditions can significantly alter the shelf life of the product. Such conditions would include temperature, moisture, open containers, etc.

Data Sheet