TPI FEP Series Single & Three Phase Hazardous Location Wall Convector

• Cabinet size 18” high, 9” wide.
• Bottom In – Top Out air flow.
• Wall mounting bracket supplied.
• Units cannot be operated in room ambient exceeding 104 degrees F (40 degrees C).
• Heavy duty 16 gauge steel with gray epoxy textured powder coated finish.
• 9” minimum clearance from bottom of heater to floor required.
• Stainless steel cartridge element inserted into Aluminum finned Copper sheath.
• Standard unit (without EPET thermostat or control section) is NEMA 4 rated.
• Made in U.S.A.
• California residents see Prop 65 Warnings

T-2A SERIES SINGLE PHASE Class 1, Group B, C & D Division 1 & 2 280° C / 536° F

Catalog Number	Model Number	BTU	Voltage	Wattage	Weight (lbs)
04451402	FEP-1812-1RA	6143	120	1800	50
04451502	FEP-1820-1RA	6143	208	1800	50
04451602	FEP-1824-1RA	6143	240	1800	50
04451702	FEP-1827-1RA	6143	277	1800	50
04451802	FEP-1848-1RA	6143	480	1800	50
04451902	FEP-3620-1RA	12286	208	3600	54
04452002	FEP-3624-1RA	12286	240	3600	54
04452102	FEP-3627-1RA	12286	277	3600	54
04452202	FEP-3648-1RA	12286	480	3600	54
04452302	FEP-3657-1RA	12286	600	3600	54
04452402	FEP-3820-1RA	12969	208	3800	80
04452502	FEP-3824-1RA	12969	240	3800	80
04452602	FEP-38271-RA	12969	277	3800	80
04452702	FEP-3848-1RA	12969	480	3800	80
04452802	FEP-7620-1RA	25938	208	7600	85
04452902	FEP-7624-1RA	25938	240	7600	85
04453002	FEP-7627-1RA	25938	277	7600	85
04453102	FEP-7648-1RA	25938	480	7600	85
04453202	FEP-7657-1RA	25938	600	7600	85

NOTE:

• FEP-7620-1RA, FEP-7624-1RA, FEP-7627-1RA may not be used with a 22 Amp line voltage thermostat.

T-3A SERIES SINGLE PHASE Class 1, Group B, C & D Division 1 & 2 180° C / 356° F

Catalog Number	Model Number	BTU	Voltage	Wattage	Weight (lbs)
04453302	FEP-0812-1RA	2730	120	800	50
04453402	FEP-0820-1RA	2730	208	800	50
04453502	FEP-0824-1RA	2730	240	800	50
04453602	FEP-0827-1RA	2730	277	800	50
04453702	FEP-0848-1RA	2730	480	800	50
04453802	FEP-1612-1RA	5460	120	1600	54
04453902	FEP-1620-1RA	5460	208	1600	54
04454002	FEP-1624-1RA	5460	240	1600	54
04454102	FEP-1627-1RA	5460	277	1600	54
04454202	FEP-1648-1RA	5460	480	1600	54
04454302	FEP-1657-1RA	5460	600	1600	54
04454402	FEP-1712-1RA	5802	120	1700	80
04454502	FEP-1720-1RA	5802	208	1700	80
04454602	FEP-1724-1RA	5802	240	1700	80
04454702	FEP-1727-1RA	5802	277	1700	80
04454802	FEP-1748-1RA	5802	480	1700	80
04454902	FEP-3420-1RA	11604	208	3400	85
04455002	FEP-3424-1RA	11604	240	3400	85
04455102	FEP-3427-1RA	11604	277	3400	85
04455202	FEP-3448-1RA	11604	480	3400	85
04455302	FEP-3457-1RA	11604	600	3400	85

Single Phase Factory Installed Control Options

Suffix	Model Number	Description
T1	EPETP8S	single pole thermostat factory mounted to 120V – 480V units. (50 degrees F – 90 degrees F)
T2	EPETP8D	double pole thermostat factory mounted to 120V – 480V units. (50 degrees F – 90 degrees F)

Notes

• *Remove – RA suffix and add new suffix. Suffix “T” is 22 Amps maximum.
• All EPET / T1 / T2 optional thermostats manufactured with anti-static plastic

See all TPI Corporation products