


- 20 gauge galvanized cabinet.
- 0″ Clearance on sides, top, & bottom.
- Variable speed motor, factory set at maximum. Motor speed can be field adjusted to increase heat rise.
- Acoustically insulated with 1” fiberglass.
- Access panels on bottom of unit.
- 24 Volt controls. / Disconnect switch
- Air flow switch.
- Terminal blocks.
- Single point connection.
- Dust tight control enclosure.
- Filter rack on inlet with throw away filter.
- Inlet and outlet screens and duct connection.
- Automatic primary limit control.
- Optional wall thermostat, unit thermostat or SSR control which proportionally regulates heat output.
- Made in U.S.A.
- California residents see Prop 65 Warnings
| Catalog Number | Model Number | Motor Amp | Motor Rating HP | Motor Volt | Weight (lbs) |
|---|---|---|---|---|---|
| 05344502 | H3G7305 | 2 | 1/4 | 277 | 163 |
| 05344602 | H3G7310-2 | 2 | 1/4 | 277 | 163 |
| 05344802 | H3G7312 | 3 | 1/4 | 277 | 219 |
| 05345002 | H3G7312-2 | 3 | 1/4 | 277 | 219 |
| 05345202 | H3G7315 | 3 | 1/4 | 277 | 219 |
| 05346002 | P3P7305 | 1 | 1/4 | 480 | 163 |
| 05346102 | P3P7310-2 | 2 | 1/4 | 480 | 163 |
| 05346202 | P3P7312 | 2 | 1/4 | 480 | 219 |
| 05346302 | P3P7312-2 | 2 | 1/4 | 480 | 219 |
| 05346402 | P3P7315-2 | 2 | 1/4 | 480 | 219 |
| 05346502 | P3P7318 | 2 | 1/4 | 480 | 219 |
| 05346602 | P3P7318-2 | 2 | 1/4 | 480 | 219 |
| 06063002 | G1G7305 | 2 | 1/4 | 277 | 163 |
| 06063602 | F3G7310-2 | 2 | 1/4 | 120 | 163 |
| 06085102 | H3G7315-2 | 3 | 1/4 | 277 | 219 |
| 06085902 | F3G7312-2 | 3 | 1/4 | 120 | 219 |
| 06099602 | F3G7310 | 2 | 1/4 | 120 | 163 |
| 06175402 | H1G7305 | 2 | 1/4 | 277 | 163 |
| 06176402 | F3G7305 | 2 | 1/4 | 277 | 163 |
| 06177302 | H3G7310 | 2 | 1/4 | 277 | 141 |
| 06177702 | P3P7315 | 2 | 1/4 | 480 | 219 |
| 06180602 | P3P7310 | 2 | 1/4 | 480 | 163 |
| 06180702 | F1G7305 | 2 | 1/4 | 277 | 163 |
| 06181002 | F3G7315-2 | 8 | 1/4 | 120 | 219 |
- The 7300 Series LowBoy Plenum Heater is designed to fit jobs where the clear space between the ceiling and the floor above is as small as 11 3/4″
- SSR proportional control maximum: 45 Amps
- SSRs require a 0-10vDC, 4-20mA, or 0-135 Ohm field supplied signal or an optional VT7225 thermostat
Contact Us For A Custom Quote
PE Energy is an authorized TPI Corporation distributor
Request a Quote
See all TPI Corporation products