pesales@pe-energy.com +1 ( 281 ) 310 – 0628

OilSafe Oil Transfer Equipment

Transfer Containers & Lids

OILSAFE dispensing containers and color-coded lids have been tried and proven in the toughest work environments. They are durable, easy-touse, efficient and safe.

Mix and match lids and drums to get the right lubricant transfer container for the job.

Oil Safe 102021 Stumpy Spout Hose Extension

STUMPY SPOUT LID

Ideal for engine and gear oils and when a higher lubricant flow is required.

The 1" spout opening on the OILSAFE Stumpy Spout Lids is the largest on OILSAFE spout lids. It's design is ideal for applications where a higher lubricant flow is required, such as for engine oils and gear oils.

Add a Stumpy Spout Hose Extension to help with awkward or hard to reach fill points.

PART # : 102021 – Stumpy Spout Hose Extension

100500 – Beige
100501 – Black
100502 – Blue
100503 – Dark Green
100504 – Gray
100505 – Mid Green
100506 – Orange
100507 – Purple
100508 – Red
100509 – Yellow

Oil Safe 102020 Stretch Spout Hose Extension

STRETCH SPOUT LID

When precise pouring of lubricants is required.

With a 0.5" spout opening and a longer spout the OILSAFE Stretch Spout Lid is ideal for lower viscosity oils (less than ISO 220) and is designed for hard to reach areas.

Add a stretch Spout Hose Extension to help with awkward or hard to reach fill points.

PART # : 102020 – Stretch Spout Hose Extension

100300 – Beige
100301
– Black
100302
– Blue
100303
– Dark Green
100304
– Gray
100305
– Mid Green
100306
– Orange
100307
– Purple
100308
– Red
100309
– Yellow

Oil Safe Mini Spout Lid

MINI SPOUT LID

Ideal for equipment with small fill holes.

The OILSAFE Mini Spout has an outlet diameter of approximately ¼" (7mm), making it ideal for lubrication jobs where equipment fill holes are small such as constant level oilers and machine tools.

PART # : 

100400 – Beige
100401
– Black
100402
– Blue
100403
– Dark Green
100404
– Gray
100405
– Mid Green
100406
– Orange
100407
– Purple
100408
– Red
100409
– Yellow

Oil Safe Utility Lid

UTILITY LID

Ideal for topping off crank cases and gearboxes.

Multi-Purpose Utility Lid with large outlet hole (approx. 2") enables controlled fast pouring of lubricants.

The Utility Lid is designed to mate with an OILSAFE Standard or Premium Pump on a 3, 5 or 10 liter/US quart drum to take care of hard to reach and time consuming pumping applications such as gearboxes and transmissions.

PART # : 

100200 – Beige
100201
– Black
100202
– Blue
100203
– Dark Green
100204
– Gray
100205
– Mid Green
100206
– Orange
100207
– Purple
100208
– Red
100209
– Yellow

Oil Safe Storage Lid

STORAGE LID

For on-site fluid storage and transporting applications.

With this lid, OILSAFE Drums can be pre-filled for safe storage and transport and can be located for easy and timely access to fluids where and when needed. A convenient alternative to handling bulky 20 liter/US quart drums. Advanced thread design ensures secure fully sealing fit on a 1.5, 2, 3, 5 or 10 liter/US quart drum.

PART # : 

100100 – Beige
100101
– Black
100102
– Blue
100103
– Dark Green
100104
– Gray
100105
– Mid Green
100106
– Orange
100107
– Purple
100108
– Red
100109
– Yellow

Oil Safe 101005 5 Liter US Quart Drum

DRUMS

Fully graduated in both metric and imperial to assist with measuring fluid volumes.

Tough, and comfortable to handle, these drums come in 5 different sizes and fully seal when fitted to any genuine OILSAFE Lid. The drums have an extra wide neck opening (4.7" / 120mm) for rapid pouring and easy cleaning. Made of industrial grade material that withstands the toughest working conditions, the drums are designed to last and are available in 1.5, 2, 3, 5, or 10 liter/US quart.

  • Made of heat-resistant materials with UV additives
  • Ultra-durable construction. Will not warp, leak, bend or break
  • All Lids fit all genuine OILSAFE Drums from 1.5 through to 10 liter/US quart

PART # : 

101001 – 1.5 Liter / US Quart
101002
– 2 Liter / US Quart
101003
– 3 Liter / US Quart
101005
– 5 Liter / US Quart
101010
– 10 Liter / US Quart

Pumps & Pump Accessories

Pumps and accessories for the OILSAFE containers.

Match with an OILSAFE Utility Lid and a 3, 5 or 10 liter/US quart OILSAFE Drum.

Oil Safe Premium Pump

PREMIUM PUMP

Feature rich and will handle up to ISO 680 fluids.

Sharing the unmatched efficiency and reliability of the OILSAFE Standard Pump, this
heavy duty discharge pump is color-coded, has an ultra comfortable D handle grip
design and has fully serviceable internals for maximum life.

Supplied standard with a 5 foot anti-drip outlet discharge hose and
color-coded Body Collar, this pump can also be easily converted for quick
connect use. Quick connects enable the container to be filled through the stainless
steel pump body (without removing the lid) and also enables attachment to
machinery fill points by quick connect via the pump discharge hose.
Quick connect Kits and replacement parts are available.

Premium Pump comes standard with Viton® O-Rings for oils where solvent content
may be higher.

Match with an OILSAFE Utility Lid and a 3, 5 or 10 liter/US quart OILSAFE Drum.

For smaller fill hole applications add a Pump Reducer Nozzle accessory to the outlet nozzle.

  • Made of heat-resistant materials with UV additives
  • Ultra-durable construction. Will not warp, leak, bend or break
  • All Lids fit all genuine OILSAFE Drums from 1.5 through to 10 liter/US quart

PART # : 

102300 – Beige
102301
– Black
102302
– Blue
102303
– Dark Green
102304
– Gray
102305
– Mid Green
102306
– Orange
102307
– Purple
102308
– Red
102309
– Yellow

Oil Safe 102000 Standard Pump

STANDARD PUMP

General purpose pump will handle up to ISO 460 fluids.

This high quality down-stroke discharge pump is perfect for quickly and easily accessing hard to reach and time consuming top up points such as gearbox and transmission applications. Supplied with a removable discharge hose for easy cleaning and drainage, the pump delivers 1 liter for approximately 12 strokes.

Match with an OILSAFE Utility Lid and a 3, 5 or 10 liter/US quart OILSAFE Drum.

Supplied with 5 foot Removable Discharge Hose with a hook outlet nozzle. The anti-drip nozzle is made of aluminum and fits 1/2" and larger fill holes.

For smaller fill hole applications add a Pump Reducer Nozzle accessory to the outlet nozzle.

PART # : 

102000

DISCHARGE HOSES

DISCHARGE HOSES

For on-site fluid storage and transporting applications.

Available as a replacement 5 foot hose or in a 10 foot version for when longer reach is required, these Discharge Hoses screw easily to OILSAFE Standard and Premium Pumps.

Available in two types:

  • Anti-drip hook outlet – for discharging lubricants into open fill points 1/2" and larger. Available in 5 foot and 10 foot. Custom lengths available on request.
  • 1/4" NPT Male end – for fitting quick connects. Available in 5 foot and 10 foot. Custom lengths available on request.

PART # : 

920206 – 5' Hose Anti-drip hook outlet
920207
– 10' Hose Anti-drip hook outlet
920208
– 5' Hose 1/4" NPT male end
920209
– 10' Hose 1/4" NPT male end

PREMIUM PUMP QUICK CONNECT KITS

No need to remove the lid!

Configure the OILSAFE Premium Pump for operation with quick connects. This enables the container to be filled by quick connect through the pump body (no
need to remove the lid) and also enables attachment to machinery fill points by quick connect via the pump discharge hose. No mess, no contaminated oil top ups.

Kit contents:

  • Discharge hose (available in two lengths) with ¼" NPT male adapter for fitting of your preferred female quick connect
  • 1/4" NPT Male adapter for pump return port for fitting of your preferred male quick connect
  • 10 Micron Breather fits to Premium Pump accessory port providing contaminant free air intake when using quick connects

Note: Does not come supplied with male or female quick connects.

PART # : 

920220 – 5' Hose
920225
– 10' Hose

PREMIUM PUMP BREATHERS

Protection against airborne contaminants during the pumping process.

Available in two different sizes these breathers screw into the accessory port on OILSAFE Premium Pumps. Choose from the 10 micron baffle breather (shown in photo) or 3 micron trap breather.

The 10 Micron Baffle Breather is included with the Premium Pump quick connect Kits.

PART # : 

920250 – 10 Micron
920255
– 3 Micron

Transfer Container Accessories & Spare Parts

Extend the operational life of OILSAFE containers with these accessories and spare parts.

Enhance and extend the operational life of your OILSAFE containers with these accessories and spare parts.

PUMP REDUCER NOZZLE

Suits both OILSAFE Standard and Premium Pump

This Pump Reducer Nozzle accessory fits to the aluminium anti-drip discharge pipe on the outlet end of the Pump hose and reduces the outlet diameter down to approximately 1/4", making oil top offs to very small fill points easy, simple, fast and clean.

PART # : 

102030

PREMIUM PUMP COLLARS

On-site Identification Systems

Premium pumps use, and come standard with, removable color-coded pump collars to support on site identification systems. These pump collars can be replaced for service reasons, or should the color of the pump need to be changed.

PART # : 

920300 – Beige
920301
– Black
920302
– Blue
920303
– Dark Green
920304
– Gray
920305
– Mid Green
920306
– Orange
920307
– Purple
920308
– Red
920309
– Yellow

UTILITY LID CAP

Spare Parts

Replacement Cap for OILSAFE Utility Lid.

PART # : 

920204

1/4" NPT MALE ADAPTER

Secure and robust fitting for quick connects

For use with OILSAFE Premium Pump this brass fitting provides for secure and robust fitting of quick connects.

PART # : 

920260

SPOUT VALVE KITS

Spare Parts

Twist top spouts on OILSAFE Lids provide for secure sealing of the containers and make it easy to get the lid into position for pouring without accidental spills. Replacement Spout Valve Kits are available and come with Nitrile O-Rings.

PART # : 

920200 – Mini
920201
– Stretch
920202
– Stumpy

AIR BREATHER KIT

Spare Parts

Replace the auto-shut-off air breather button on OILSAFE Spout Lids. Comes complete with Nitrile O-Rings and suits Stumpy, Stretch and Mini Spout Lids

PART # : 

920203

EXTENSION SLEEVE - PUMP

Spare Parts

OILSAFE Pumps (both Standard and Premium) are provided with Extension Sleeves enabling the pumps to reach the bottom of 10 US Quart Drums.

This replacement Extension Sleeve comes standard with a Nitrile O-Ring.

PART # : 

920205

O-RING KITS

Spare Parts

Replace the seals on your OILSAFE equipment with these pre configured kits. All OILSAFE products, except the Premium Pump, come standard with Nitrile O-Rings.

O-RING KIT DESCRIPTIONS

PART # NITRILE

PART # VITON®

Main Lid Sea

920000

920100

Mini Spout Lid – replace all four O-Rings in a Mini Spout Lid

920001

920101

Stretch Spout Lid – replace all four O-Rings in a Stretch Spout Lid

920002

920102

Stumpy Spout Lid – replace all four O-Rings in a Stumpy Spout Lid

920003

920103

Stretch Hose Extension

920004

920104

Stumpy Hose Extension

920005

920105

Pump Sleeve – for Standard and Premium OILSAFE Pumps

920006

920106

Premium Pump

N/A

920007

Barrel Equipment

For easy and efficient dispensing of oils and fluids from barrels.

LEVER ACTION BARREL PUMP

LEVER ACTION BARREL PUMP

Ideal for oil and oil based fluids.

Designed to fit containers ranging in size from 15 gallon (50 liters) through to 55 gallon (205 liters), this popular lever action pump is engineered for professional use. Ideal for oil and oil based fluids the pump has:

  • A plated steel lever handle with rubber grip for convenience
  • Built in 1.5" and 2" bung for use on drums with either opening
  • Premium powder coated steel pump body with ribbed section aluminum die cast pump head for maximum strength
  • Curved metal spout and telescopic suction tube

PART # : 

950000

EXTENSION SLEEVE - PUMP

Spare Parts

OILSAFE Pumps (both Standard and Premium) are provided with Extension Sleeves enabling the pumps to reach the bottom of 10 US Quart Drums.

This replacement Extension Sleeve comes standard with a Nitrile O-Ring.

PART # : 

920205

ROTARY BARREL PUMP

Ideal for use in industrial & automotive applications.

This heavy duty rotary barrel pump has an aluminum die cast body and includes a 2" cast iron bung adaptor and die cast aluminum handle with security locking latch.

  • Complete with a 3 pc threaded suction tube for use on 15 gallons (50 liter) – 55 gallons (205 liter) barrels
  • Recommended for use with lubricating oils up to SAE 30, gasoline, diesel fuel and kerosene.
  • Do not use – with corrosive liquids, solvents, acids, alkalis etc
  • 1.8 m PVC nitrile delivery hose with metal nozzle, spring and hose clamp

PART # : 

950020

EXTENSION SLEEVE - PUMP

Spare Parts

OILSAFE Pumps (both Standard and Premium) are provided with Extension Sleeves enabling the pumps to reach the bottom of 10 US Quart Drums.

This replacement Extension Sleeve comes standard with a Nitrile O-Ring.

PART # : 

920205

Sight Glasses & Fluid Analysis Systems

Easily and accurately monitor fluid levels and quality.

Quick and easy condition assessment of your equipment's vital fluids to help insure cleanliness, reducing downtime and maintenance costs.

The easy-to-install and access fluid analysis system and sight glass gives you greater insight into the status of fluids and helps your respond before major issues arise.

  • Flat front sight glass with etched and painted crosshairs, allowing a clear view of
    fluids without distortion
  • Recommended Temperature: -40°F to 200°F (-40°C to 93°C)
  • UV-resistant to protect against long-term sun exposure
  • Shatterproof, stain-proof and chemically resistant
  • Fluid Analysis System - Dimensions - 2.75” x 3.18” x 3.5” (w x h x l)
  • Large Tritan™ sight glass with 1.4” diameter x 1.25” deep viewing area
  • Aluminum body
  • Steel Adapter
  • Standard flow sampling valve with stainless steel pilot tube
  • Magnetic plug
  • M16 x 2 sample port threads for attaching to vacuum pump and sample bottle
  • Steel corrosion indicator
  • Viton® o-ring

DESCRIPTION

THREAD SIZES

PART #

S

D

L

V

Sight Glass

1" NPT MALE

46652

1 5 /16"

1.18

1.10

.248 fl. oz.

Sight Glass

3/4" NPT MALE

466515

1 1 /8"

1.00

1.10

.148 fl. oz.

Sight Glass

1/2" NPT MALE

466505

7 /8"

.78

.98

.063 fl. oz.

Sight Glass

3/8" NPT MALE

466510

3 /4"

.63

.98

.054 fl. oz.

Sight Glass

1/4" NPT MALE

466500

5 /8"

.46

.73

.022 fl. oz

Sight Glass

1" BSPP MALE

466590

1 5 /16"

1.18

1.10

.248 fl. oz.

Sight Glass

3/4" BSPP MALE

466560

1 1 /8"

1.00

1.10

.148 fl. oz.

Sight Glass

1/2" BSPP MALE

466565

7 /8"

.78

.98

.063 fl. oz

Sight Glass

3/8" BSPP MALE

466555

3 /4"

.63

.98

.054 fl. oz.

Sight Glass

1/4" BSPP MALE

466550

5 /8"

.46

.73

.022 fl. oz

Sight Glass

M10 x 1" THREADS

466545

7 /16"

.32

.59

.004 fl. oz.

Sight Glass

M12 x 1.5" THREADS

466540

7 /16"

.32

.59

.004 fl. oz.

Sight Glass

M20 x 1.5" THREADS

466535

7 /8"

.78

.96

.061 fl. oz.

Sight Glass

M22 x 1.5" THREADS

466570

7 /8"

.78

.96

.061 fl. oz.

Fluid Analysis System

1 1/2" NPT THREADS

830150

Cell
Cell
Cell
Cell

Fluid Analysis System

1 1/4" NPT THREADS

830125

Cell
Cell
Cell
Cell

Fluid Analysis System

1" NPT THREADS

830100

Cell
Cell
Cell
Cell

Fluid Analysis System

3 /4" NPT THREADS

830075

Cell
Cell
Cell
Cell

Fluid Analysis System

1/2" NPT THREADS

830050

Cell
Cell
Cell
Cell

Fluid Analysis System

1" BSPP THREADS

830100B

Cell
Cell
Cell
Cell

Fluid Analysis System

3 /4" BSPP THREADS

830075B

Cell
Cell
Cell
Cell

Fluid Analysis System

1/2" BSPP THREADS

830050B

Cell
Cell
Cell
Cell

Fluid Analysis System

M20 x 1.5" THREADS

830150M

Cell
Cell
Cell
Cell

S - Wrench Size D - Diameter L - Length V - Volume