Regal Swab Cups

BM Series

BM Series

BV Series

BV Series

Sand King

Sand King

BX Series

BX Series

R Series

R Series

Load King

Load King

GW Type

GW Type

BM Series
This multi-rib design known as the BM "Mission Type" cup allows for very light loading and has excellent tubing wall sealing characteristics.
Designed to self-load, it is made with flexile lips and a large top loading lip to insure light load recovery.

BV Series
For light loads with a high ratio of sand, the BV Series swab cup will automatically dump when overloaded. The seven rib configuration is securely bonded to the aluminum or steel sleeves to prevent separation when dumping.

Sand King
The Sand King swab cup features five sets of dual ribs which give maximum fluid lifting in light to medium load applications. The larger upper rib in each set effects a positive seal even under the lightest load. The thicker and more rigid lower rib backs up and supports the upper rib enabling the SK cup to swab far greater fluid loads than the conventional rib-type cups.

BX Series
This cup is designed to be slightly flexible for a fast positive seal in medium load applications. Under loading, however, it compresses to form a solid rubber mass for maximum lifting capacity and durability with minimum wear.

R Series
For increased shape retention and support, this cup is designed with an internal metal reinforcement. Formulated with superior rubber compounding that is resistant to high temperatures, tearing and chunking, the R Series is an excellent choice in deep hot wells and rough or corroded tubing or casings. Because the metal is molded near the outer cup diameter, the wear is concentrated on the metal rather than the rubber.

Load King
Load King cups are designed with a high lip strength to provide maximum lifting power. When under load, the cup compresses to form a solid rubber mass capable of lifting the heaviest loads, even in rough or pitted tubings or casings.

GW Type
The GW Type is a single lip cup reinforced with encapsulated steel spring wires. GW is designed for light loads in mixed strings, as well as internally damaged strings. The heavy, flexible lip enables the cup to run smoothly while its oversized lip automatically adjusts to provide a seal for total fluid removal.

Tubing Swab Cups - Engineering Data & Part Numbers

Tubing Data Tubing Swab Cups (Cup O.D. in inches shown below Part Number)
Nom. O.D. (in.) Tubing Weight (lb/ft) Tubing I.D. (in.) Min. Joint I.D. (in.) LK Series BX Series SK Series BV Series BM Series V Series R Series GW Series
1.315” (1”) 1.70-1.80 1.049 .970 BX-10-AL 1.030
1.80 1.049 BX-10-UAL .970
1.660” (1-1/4”) 2.30-2.40 1.300 BX-12-AL 1.350 SK-12-ST 1.320
2.40 BX-12-UAL 1.295
1.900” (1-1/2”) 2.75-2.90 1.610 1.530 LK-15-AL 1.585 BX-15-AL 1.595 BV-15-AL 1.580 RV-15-ST 1.530 R-15 1.530
2.90 LK-15-UAL 1.512 BX-15-UAL 1.550
2.000” 3.40 1.670 LK-16-AL 1.650 BX-1.670-AL 1.655 SK-16-AL 1.660
2.063” (1-3/4”) 3.25-3.40 1.751 1.700 LK-17-AL 1.695 BX-17-AL 1.690 SK-17-AL 1.690 R-17 1.630
3.40 LK-16-AL 1.650 BX-1.670-AL* 1.655
2-3/8” (2”) 4.60-4.70 1.995 1.945 LK-20-AL/ST 1.970 BX-20-AL/ST 1.980 SK-20-AL/ST 1.980 BV-20-AL/ST 1.955 BM-20-AL 1.935 RV-20-ST 1.960 R-20 1.935 GW-20 1.930
4.70 LK-20-UAL/UST 1.935 BX-20-UAL/UST 1.945 BX-1.910-AL* 1.910 SK-20-UAL/UST 1.945
5.30 1.938 1.890 BX-1.867-AL 1.867
5.80-5.95 1.867 1.805 BX-1.780-AL 1.780
6.20 1.853 1.795 BX-1.780-AL 1.780
7.70 1.703 1.645 LK-15-AL 1.585 BX-15-AL 1.595 R-15 1.530
2-7/8” (2-1/2”) 6.40-6.50 2.441 2.375 LK-25-AL/ST 2.425 BX-25-AL/ST 2.425 SK-25-AL/ST 2.425 BV-25-AL/ST 2.425 BM-25-AL 2.400 RV-25-ST 2.410 R-25 2.370 GW-25 2.450
6.50 LK-25-UAL/UST 2.360 BX-25-UAL/UST 2.375 SK-25-UAL/UST 2.380
7.80-7.90 2.323 2.265 LK-23-AL 2.290 BX-23-AL* 2.323
7.90 LK-23-UAL 2.260 BX-2.295-AL 2.295
8.60-8.70 2.259 2.200 LK-29-AL/ST 2.235 BX-2.220-AL 2.220 R-2.259 2.150
8.70 LK-29-UAL/UST 2.170 BX-2.259-AL 2.255
9.50 2.195 2.130 LK-28-DP-AL/ST 2.125 BX-28-DP-AL 2.110
10.40DP 2.151 2.130
11.50 1.995 1.935 LK-20-UAL/UST 1.935 BX-20-UAL/UST 1.945 SK-20-UAL/UST 1.945 R-20 1.935
3-1/2” (3”) 7.70 3.068 BX-30-AL/ST 2.980 R-30 2.940
9.0-9.30 9.50DP 2.992
9.30 2.992 2.920
10.20 2.922 BX-30-UAL/UST 2.890
10.30 2.878 BX-2.860-AL 2.860
12.70- 12.95 2.750 BX-2.720-AL 2.720
12.95 2.687
13.30DP 2.764
15.50DP 2.602 BX-35-DP-AL 2.565
4” 9.50 3.548 BX-3.548-AL* 3.548
11.00 3.476 3.395 BX-3.476-AL* 3.476
*Available by special order      AL - aluminum insert
ST - steel insert       U - undersize

Tubing Swab Cups - Engineering Data & Part Numbers

Casing Data Casing Swab Cups (Cup O.D. in inches shown below Part Number)
Nominal O.D. (in.) Casing Weight (lb/ft) Casing I.D. (in.) Min. Joint I.D. (in.) LK Series BX Series SK Series V-Ring Series R-(Wire)-Series
4-1/2” 9.50 4.090 LK-45-ST 4.000 BX-45-AL 4.020 SK-45-ST 4.020 RV-45-ST 4.030 R-45 4.000
10.50 4.052
11.60 4.000 BX-3.850-AL 3.850
12.60 Tbg 12.75 Tbg 3.958 3.865 BX-3.850-AL 3.850
13.50 3.920 BX-3.850-AL 3.850
15.10-15.20 16.60 DP 3.826 BX-3.820-AL 3.820
5-1/2” 13.00 5.044 BX-55-AL 4.975 SK-55-ST 4.867 RV-55UID-ST RV-55-ST 4.960 RV-55-ST-HD R-55 4.960
14.00 5.012
15.50 4.950 LK-55-ST 4.867
17.00 4.892 BX-4.867-AL 4.867
* Available by special order
RV-55UID-ST to be run on 4-1/2” mandrel
RV-55-ST-HD is Heavy Duty version

PE Energy is an authorized Regal distributor offering the full range of Regal products.           Contact us for a custom quote.

See all Regal products.