Oteco offers a broad array of rubber products that are specially designed for the oil and gas industry. Elastomers are combined to create special formulations to ensure that these products meet the performance demands of today’s drilling environments.
Oteco manufactures various rubber products including Oteco tubing stripper rubbers, Oteco pipe wipers, Oteco kelly wipers, diaphragms, BOP products, and Oteco bladders and accessories. These products are available in different ratings and sizes.
In addition, Oteco rubber products are available in different materials including Natural, Nitrile, and Neoprene. The quality of Oteco rubber products makes them an ideal choice for today’s drilling applications.

BOP / RUBBER PRODUCTS
Oteco provides replacement packing units and seals for the Hydril “GK”, “MSP”, Regan type “K” and the Shaffer Spherical blowout preventers. These items are available in Natural (NR), Nitrile (NBR) and Neoprene (CR) rubber compounds with each unit tested prior to shipment. In addition, Oteco offers replacement rubbers for the “Shaffer” rotating heads as well as Hinderliter stripper.

PIPE & KELLY WIPERS
Oteco offers a wide range of pipe and Kelly wipers. These pipe wipers are offered in single, double, oval and handle bar types and are available in either natural (black) or oil resistant (red) nitrile rubber compounds. In addition, the double wipers are available in solid, split, and split rap-a-round configurations.
Oteco pipe wipers offer greater tearing resistance due to a reinforced metal insert molded to the resilient rubber. Oteco Kelly wipers are molded form the same high quality rubber as the pipe wipers and are offed for both square and hexagonal kellys. The Kelly wiper are reinforced with a bonded metal ring to provide longer service life for the wiper as well as the Kelly drive bushing.

BLADDERS AND ACCESSORIES
Oteco supplies replacement diaphragms and parts for the Hydril and Mattco 10 and 20 gallons pulsation dampeners. These diaphragms are molded in one piece and are available in 1,500 to 7,500 psi ratings. They also have a metal insert molded into the bottom to prevent extrusion into the bottom flange connection. Stabilizers, plates, screws, lock washers, bottom plate gaskets, charging valves and pressure gauges are also available.

BALANCING & PULL BACK STRAPS
Oteco balancing straps keep center-latch elevators balanced in any position. This makes elevators easier to handle, reducing fatigue. The balancing strap attaches to the link with a U-bolt assembly. The twisted metal loop at the other end of the balancing strap attaches to the elevator handle.
OTECO tong pull-back straps act as a rubber spring to automatically reposition tongs to the side of the floor between each makeup or breakout. Hook one loop of the tong strap over the tong line pin at the end of a manual tong arm. Secure the other end loop with a mooring line to a convenient location. The pull-back needs only to be stretched slightly for proper operation.
PE Energy is an authorized Oteco distributor offering the full range of Oteco products. Contact us for a custom quote.
See all Oteco products.
Code | Item | Description |
210731 | RB,ANL,HYD,7-1/16-3K,NR,87013 | Packing Unit, Natural Rubber-(NR), for 7-1/16″ – 3,000 psi Hydril Type MSP Screw Head; 3,000 psi Type GK & GKM Screw Head |
210732 | RB,ANL,HYD,7-1/16-3K,NBR,87013 | Packing Unit, Nitrile Rubber-(NBR), for 7-1/16″ -3,000 psi Hydril Type MSP Screw Head; 3,000 psi Type GK & GKM Screw Head |
210733 | RB,ANL,HYD,7-1/16-3K,CR,87013 | Packing Unit, Neoprene Rubber-(CR), for 7-1/16″ -3,000 psi Hydril Type MSP Screw Head; 3,000 psi Type GK & GKM Screw Head |
210751 | RB,ANL,HYD,7-1/16-5K,NR,76603 | Packing Unit, Natural Rubber-(NR), for 7-1/16″ – 5,000 psi Hydril Annular Type GK Screw Head |
210752 | RB,ANL,HYD,7-1/16-5K,NBR,76603 | Packing Unit, Nitrile Rubber-(NBR), for 7-1/16″ – 5,000 psi Hydril Annular Type GK Screw Head |
210753 | RB,ANL,HYD,7-1/16-5K,CR,76603 | Packing Unit, Neoprene Rubber-(CR), for 7-1/16″ – 5,000 psi Hydril Annular Type GK Screw Head |
210931 | RB,ANL,HYD,9″-3K,NR,30623 | Packing Unit, Natural Rubber-(NR), for 9″ – 2,000 psi Hydril Type MSP Screw Head and 3,000 psi Type GK Screw Head |
210932 | RB,ANL,HYD,9″-3K,NBR,30623 | Packing Unit, Nitrile Rubber-(NBR), for 9″ – 2,000 psi Hydril Type MSP and 3,000 psi Type GK Screw Head |
210933 | RB,ANL,HYD,9-3K,CR,30623 | Packing Unit, Neoprene Rubber-(NCR), for 9″ – 2,000 psi Hydril Type MSP and 3,000 psi Type GK Screw Head |
211131 | RB,ANL,HYD,11″-3K,NR,81813 | Packing Unit, Natural Rubber-(NR), for 11″ – 2,000 psi Hydril Type MSP and 3,000 psi Type GK Screw Head |
211132 | RB,ANL,HYD,11″-3K,NBR,81813 | Packing Unit, Nitrile Rubber-(NBR), for 11″ – 2,000 psi Hydril Type MSP and 3,000 psi Type GK Screw Head |
211133 | RB,ANL,HYD,11-3K,CR,81813 | Packing Unit, Neoprene Rubber-(CR), for 11″ – 2,000 psi Hydril Type MSP and 3,000 psi Type GK Screw Head |
211151 | RB,ANL,HYD,11″-5K,NR,10413 | Packing Unit, Natural Rubber-(NR), for 11″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 10413-N |
211152 | RB,ANL,HYD,11″-5K,NBR,10413 | Packing Unit, Nitrile Rubber-(NBR), for 11″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 10413 |
211153 | RB,ANL,HYD,11″-5K,CR,10413 | Packing Unit, Neoprene Rubber-(CR), for 11″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 10413-S |
211331 | RB,ANL,HYD,13-5/8-3K,NR,23703 | Packing Unit, Natural Rubber-(NR), for 13-5/8″ – 3,000 psi Hydril Annular Type GK Screw or Latch Head 23703-N |
211332 | RB,ANL,HYD,13-5/8-3K,NBR,23703 | Packing Unit, Nitrile Rubber-(NBR), for 13-5/8″ – 3,000 psi Hydril Annular Type GK Screw or Latch Head 23703 |
211333 | RB,ANL,HYD,13-5/8-3K,CR,23703 | Packing Unit, Neoprene Rubber-(CR), for 13-5/8″ – 3,000 psi Hydril Annular Type GK Screw or Latch Head 23703-S |
211351 | RB,ANL,HYD,13-5/8-5K,NR,84183 | Packing Unit, Natural Rubber-(NR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw, Latch, or Helicopter Lift Head |
211352 | RB,ANL,HYD,13-5/8-5K,NBR,84183 | Packing Unit, Nitrile Rubber-(NBR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw, Latch, or Helicopter Lift Head |
211353 | RB,ANL,HYD,13-5/8-5K,CR,84183 | Packing Unit, Neoprene Rubber-(CR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw, Latch, or Helicopter Lift Head |
212121 | RB,ANL,HYD,21-1/4-2K,NR,57373 | Packing Unit, Natural Rubber-(NR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Screw, Latch, or Helicopter Lift Head 57373-N |
212122 | RB,ANL,HYD,21-1/4-2K,NBR,57373 | Packing Unit, Nitrile Rubber-(NBR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Screw, Latch, or Helicopter Lift Head 57373 |
212123 | RB,ANL,HYD,21-1/4-2K,CR,57373 | Packing Unit, Neoprene Rubber-(CR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Screw, Latch, or Helicopter Lift Head 57373-S |
220730 | RB,ANL,SL-KT,7-1/16-3K,38605 | Seal Kit Set, Nitrile Rubber-(NBR), for 7-1/16″ – 3,000 psi Hydril Annular Type GK Screw Head 38605 |
220731 | RB,ANL,SL,HG,7-1/16″-3K,20613 | Head Gasket, Nitrile Rubber-(NBR), for 7-1/16″ – 3,000 psi Hydril Annular Type GK Screw Head 20613 |
220732 | RB,ANL,SL,U-UP,7-1/16-3K,30613 | U-Seal, Upper, Nitrile Rubber-(NBR), for 7-1/16″ – 3,000 psi Hydril Annular Type GK Screw Head 30613 |
220733 | RB,ANL,SL,U-MD/LW,7&11-3K40613 | U-Seal, Middle, Nitrile Rubber-(NBR), for 7-1/16″ – 3,000 psi or U-Seal, Lower for 11″ – 3,000 psi Hydril Type GK Screw Head |
220734 | RB,ANL,SL,U-LW,7-1/16-3K,41651 | U-Seal, Lower, Nitrile Rubber-(NBR), for 7-1/16″ – 3,000 psi Hydril Annular Type GK Screw Head 41651 |
220750 | RB,ANL,SL-KT,7-1/16-5K,48605 | Seal Kit Set, Nitrile Rubber-(NBR), for 7-1/16″ – 5,000 psi Hydril Annular Type GK Screw Head 48605 |
220751 | RB,ANL,SL,HG,7-1/16″-5K,09603 | Head Gasket, Nitrile Rubber-(NBR), for 7-1/16″ – 5,000 psi Hydril Annular Type GK Screw Head |
220752 | RB,ANL,SL,U-UP,7-1/16-5K,98603 | U-Seal, Upper, Nitrile Rubber-(NBR), for 7-1/16″ – 5,000 psi Hydril Annular Type GK Screw Head |
220753 | RB,ANL,SL,U-MD,7-1/16-5K,88603 | U-Seal, Middle, Nitrile Rubber-(NBR), for 7-1/16″ – 5,000 psi or U-Seal |
220754 | RB,ANL,SL,U-LW,7-1/16-5K,50703 | U-Seal, Lower, Nitrile Rubber-(NBR), for 7-1/16″ – 5,000 psi Hydril Annular Type GK Screw Head |
220930 | RB,ANL,SL-KT,9″-3K,58605 | Seal Kit Set, Nitrile Rubber-(NBR), for 9″ – 3,000 psi Hydril Annular Type GK Screw Head 58605 |
220931 | RB,ANL,SL,HG,9″-3K,86823 | Head Gasket, Nitrile Rubber-(NBR), for 9″ – 3,000 psi Hydril Annular Type GK Screw Head 86823 |
220932 | RB,ANL,SL,U-UP,9″-3K,07823 | U-Seal, Upper, Nitrile Rubber-(NBR), for 9″ – 3,000 psi Hydril Annular Type GK Screw Head 07823 |
220933 | RB,ANL,SL,U-MD,9″-3K,17823 | U-Seal, Middle, Nitrile Rubber-(NBR), for 3″- 3,000 psi Hydril Annular Type GK Screw or Latch Head 17823 |
220934 | RB,ANL,SL,U-LW,9″-3K,96823 | U-Seal, Lower, Nitrile Rubber-(NBR), for 9″ – 3,000 psi Hydril Annular Type GK Screw Head 96823 |
221130 | RB,ANL,SL-KT,11″-3K,78605 | Seal Kit Set, Nitrile Rubber-(NBR), for 11″ – 3,000 psi Hydril Annular Type GK Screw Head 78605 |
221131 | RB,ANL,SL,HG,11″-3K,90813 | Head Gasket, Nitrile Rubber-(NBR), for 11″ – 3,000 psi Hydril Annular Type GK Screw Head 90813 |
221132 | RB,ANL,SL,U-UP,11″-3K,80813 | U-Seal, Upper, Nitrile Rubber-(NBR), for 11″ – 3,000 psi Hydril Annular Type GK Screw Head 80813 |
221133 | RB,ANL,SL,U-MD,11″-3K,70813 | U-Seal, Middle, Nitrile Rubber-(NBR), for 11″ – 3,000 psi Hydril Annular Type GK Screw Head 70813 |
221150 | RB,ANL,SL-KT,11″-5K,88605 | Seal Kit Set, Nitrile Rubber-(NBR), for 11″ – 5,000 psi Hydril Annular Type GK Screw Head 88605 |
221151 | RB,ANL,SL,HG,11″-5K,20413 | Head Gasket, Nitrile Rubber-(NBR), for 11″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 20413 |
221152 | RB,ANL,SL,U-UP,11″-5K,30413 | U-Seal, Upper, Nitrile Rubber-(NBR), for 11″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 30413 |
221153 | RB,ANL,SL,U-MD,11″-5K,63703 | U-Seal, Middle, Nitrile Rubber-(NBR), for 11″ – 5,000 psi or U-Seal, Upper for 13-5/8″ 3,000 psi Hydril Type GK Screw or Latch Head |
221154 | RB,ANL,SL,U-LW,11″-5K,99523 | U-Seal, Upper, Nitrile Rubber-(NBR), for 9″ – 5,000 psi Hydril Type GK Screw Head, or U-Seal, Lower for 11″ 5,000 psi Hydril Type GK Screw or Latch Head |
221330 | RB,ANL,SL-KT,13-5/8-3K,98605 | Seal Kit Set, Nitrile Rubber-(NBR), for 13-5/8″ – 3,000 psi Hydril Annular Type GK Screw Head 98605 |
221331 | RB,ANL,SL,HG,13-5/8″-3K,83703 | Head Gasket, Nitrile Rubber-(NBR), for 13-5/8″ – 3,000 Screw Head and 13-5/8 – 5,000 psi Hydril Annular Type GK Latch Head |
221333 | RB,ANL,SL,U-MD,13-5/8-3K,73703 | U-Seal, Middle, Nitrile Rubber-(NBR), for 13-5/8″ – 3,000 psi Hydril Type GK Screw or Latch Head or U-Seal, Inner for 29-1/2″ 500 psi Type MSP Screw Head |
221334 | RB,ANL,SL,U-LW,13-5/8-3K,53703 | U-Seal, Middle, Nitrile Rubber-(NBR), for 9″ – 5,000 psi Hydril Type GK Screw Head or U-Seal, Lower for 13-5/8″ 3,000 psi Hydril Type GK Screw or Latch Head |
221350 | RB,ANL,SL-KT,13-5/8-5K,09605 | Seal Kit Set, Nitrile Rubber-(NBR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw Head 09605 |
221351 | RB,ANL,SL,HG,13-5/8″-5K,05183 | Head Gasket, Nitrile Rubber-(NBR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw or Helicopter Lift Head 05183 |
221352 | RB,ANL,SL,U-UP,13-5/8-5K,15183 | U-Seal, Upper, Nitrile Rubber-(NBR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 15183 |
221353 | RB,ANL,SL,U-MD,13-5/8-5K,25183 | U-Seal, Middle, Nitrile Rubber-(NBR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 25183 |
221354 | RB,ANL,SL,U-LW,13-5/8-5K,56183 | U-Seal, Lower, Nitrile Rubber-(NBR), for 13-5/8″ – 5,000 psi Hydril Annular Type GK Screw or Latch Head 56183 |
222120 | RB,ANL,SL-KT,21-1/4-2K,1752001 | Seal Kit Set, Nitrile Rubber-(NBR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Screw Head 1752001 |
222121 | RB,ANL,SL,HG,21-1/4″-2K,77373 | Head Gasket, Nitrile Rubber-(NBR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Screw or Helicopter Lift Head 77373 |
222122 | RB,ANL,SL,U-LW-21-1/4-2K,87373 | U-Seal, Lower, Nitrile Rubber-(NBR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Screw or Latch Head 87373 |
222123 | RB,ANL,SL,U-UP,21-1/4-2K,97373 | U-Seal, Upper, Nitrile Rubber-(NBR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Latch & Screw Head |
222124 | RB,ANL,SL,U-IN,21-1/4-2K,08373 | U-Seal, Inner, Nitrile Rubber-(NBR), for 21-1/4″ – 2,000 psi Hydril Annular Type MSP Screw or Latch Head 08373 |
231151 | RB,ANL,SHF,11″-5K,NR,150809 | Packing Unit, Natural Rubber-(NR), for 11″-5000 psi Shaffer Spherical Type 150809 |
231152 | RB,ANL,SHF,11″-5K,NBR,150810 | Packing Unit, Nitrile Rubber-(NBR), for 11″-5000 psi Shaffer Spherical Type 150810 |
231351 | RB,ANL,SHF,13.6″-5K,NR,150577 | Packing Unit, Natural Rubber-(NR), for 13″-5000 psi Shaffer Spherical Type 150577 |
231352 | RB,ANL,SHF,13.6″-5K,NBR,150576 | Packing Unit, Nitrile Rubber-(NBR), for 13″-5000 psi Shaffer Spherical Type 150576 |
242508 | RB,ANL,REGAN,TYPE-K,8-5/8″ | Packing Unit, Neoprene Rubber-(CR), for 8-5/8″ – 3000 psi Regan Annular Type K |
242510 | RB,ANL,REGAN,TYPE-K,10-3/4″ | Packing Unit, Neoprene Rubber-(CR), for 10-3/4″ – 3,000 psi Regan Annular Type K |
425063 | RH,BOX WRENCH,BW5063,0.63 STUD | Impact Box End Wrench, For 5/8″ Dia. Stud and 1-1/16″ Nut (Across Flats) |
425075 | RH,BOX WRENCH,BW5075,0.75 STUD | Impact Box End Wrench, For 3/4″ Dia. Stud and 1-1/4″ Nut (Across Flats) |
425088 | RH,BOX WRENCH,BW5088,0.88 STUD | Impact Box End Wrench, For 7/8″ Dia. Stud and 1-7/16″ Nut (Across Flats) |
425100 | RH,BOX WRENCH,BW5100,1.00 STUD | Impact Box End Wrench, For 1″ Dia. Stud and 1-5/8″ Nut (Across Flats) |
425113 | RH,BOX WRENCH,BW5113,1.13 STUD | Impact Box End Wrench, For 1-1/8″ Dia. Stud and 1-13/16″ Nut (Across Flats) |
425125 | RH,BOX WRENCH,BW5125,1.25 STUD | Impact Box End Wrench, For 1-1/4″ Dia. Stud and 2″ Nut (Across Flats) |
425138 | RH,BOX WRENCH,BW5138,1.38 STUD | Impact Box End Wrench, For 1-3/8″ Dia. Stud and 2-3/16″ Nut (Across Flats) |
425150 | RH,BOX WRENCH,BW5150,1.50 STUD | Impact Box End Wrench, For 1-1/2″ Dia. Stud and 2-3/8″ Nut (Across Flats) |
425163 | RH,BOX WRENCH,BW5163,1.63 STUD | Impact Box End Wrench, For 1-5/8″ Dia. Stud and 2-9/16″ Nut (Across Flats) |
425175 | RH,BOX WRENCH,BW5175,1.75 STUD | Impact Box End Wrench, For 1-3/4″ Dia. Stud and 2-3/4″ Nut (Across Flats) |
425188 | RH,BOX WRENCH,BW5188,1.88 STUD | Impact Box End Wrench, For 1-7/8″ Dia. Stud and 2-15/16″ Nut (Across Flats) |
425200 | RH,BOX WRENCH,BW5200,2.00 STUD | Impact Box End Wrench, For 2″ Dia. Stud and 3-1/8″ Nut (Across Flats) |
425225 | RH,BOX WRENCH,BW5225,2.25 STUD | Impact Box End Wrench, For 2-1/4″ Dia. Stud and 3-1/2″ Nut (Across Flats) |
425250 | RH,BOX WRENCH,BW5250,2.50 STUD | Impact Box End Wrench, For 2-1/2″ Dia. Stud and 3-7/8″ Nut (Across Flats) |
160002 | RBIN,GV,DM,25,SEAT RING | Seat Ring for DM Gate Valve Model 25 |
160003 | RBIN,GV,DM,35,SEAT RING | Seat Ring for DM Gate Valve Model 35 |
160004 | RBIN,GV,DM,45,SEAT RING | Seat Ring for DM Gate Valve Model 45 |