[vc_row][vc_column]
-
G1 Premaire Cadet Esc, 15 min. crbn, kvlr, hansen
G1 PremAire® Cadet Escape RespiratorIntroducing the latest addition to the G1 Series, the G1 PremAire Cadet Escape. This combination supplied air respirator with escape cylinder offers a streamlined, lightweight design and incorporates one of the most technologically advanced, lightest and lowest profile facepieces on the market today.Low-profile, open-port G1 facepiece design with cross contamination protectionNo electronics in the facepiece for lighter weight and reduced complexityOne-piece assembly with both first-stage regulator and cylinder valveSmall size and profile for confined spacesRecessed pressure gauge for added protectionTwo harness materials: standard nylon for chemical resistance and Kevlar for high heat environmentsNIOSH approved as combination supplied-air respirator and self-contained breathing apparatus -
“B” SECTION BELT, B48
"B" SECTION BELT, B48 -
“O” RING FOR 08499A
"O" RING FOR 08499A -
(2J-30745 – WEAR RING CAT ALTERNATIVE PART
$0.00CAT Alternative Part -
#12 REPAIR KIT, 22064
#12 REPAIR KIT, 22064 -
#202 MOLY-LITH 400 lb Drum
$4,055.02JET-LUBE #202 MOLY-LITH has exceptional resistance to the effects of heat, water, weathering, oxidation and heavy loads. It contains rust, corrosion and oxidation inhibitors. #202 MOLY-LITH provides unexcelled protection wherever dirt, dust, high humidity, rain and adverse temperatures are problems; highly adhesive, pumpable and stable. BENEFITS: Has a dropping point of >390°F Excellent work stability under high loads, shock, and vibration Water resistant Fortified with rust and corrosion inhibitors High strength fluid film High lithium soap content >10% High moly content >8% Pumpable formula Temkin load – 60 lbs. Designed for: Excellent for rack/pinion grease cups, drive shaft idler arm and ball joints. Specifically formulated to protect your equipment from premature damages that can occur from dirt, dust, and sediments. The high soap content builds a shield between the bearing surfaces and the external elements. Contains micro-fine Molybdenum Disulfide (MoS2) particles to further enhance load carrying and low friction characteristics. Applications Automotive and industrial applications, including all grease fittings where semi-solid or plastic consistency grease is normally used. Reapplication according to owner’s manual to maintain excellent equipment functionality. Not Recommended for Oxygen Service Service Rating: 0°F to 300°F -18°C to 150°C -
#3.5 REPAIR KIT, 22041
#3.5 REPAIR KIT, 22041 -
#4.5 REPAIR KIT, 22040
#4.5 REPAIR KIT, 22040 -
#5.5 REPAIR KIT, 22042
#5.5 REPAIR KIT, 22042 -
0-RING
0-RING -
0.9MM NOZZLE
0.9MM NOZZLE -
003-2770 – O-RING CAT Alternative Part
CAT Alternative Part