Parts for the Link-Belt RTC-80130 Series II rough-terrain crane, quote-only by part number. Send the crane serial number with your request and we confirm each part against it before quoting.
What is the Link-Belt RTC-80130 Series II?
Link-Belt lists the RTC-80130 Series II as a rough-terrain crane. Its Technical Data sheet gives a maximum lifting capacity of 130 US tons (120 metric tons), a five-section boom of 41.4 to 162 ft (12.6 to 49.3 m), and a Cummins QSL engine.
Source: Link-Belt RTC-80130 Series II Technical Data (PDF, linkbelt.com). Load charts and full specifications are in that document; we do not reproduce them.
Which parts are on Link-Belt’s parts list for the RTC-80130 Series II?
Link-Belt Cranes has a parts list for the RTC-80130 Series II on its website. These 32 part numbers from that list each have a quote page with us:
Rated capacity limiter (RCL), anti-two-block and sensor parts
- Link-Belt 3L 0667: Angle Sensor (Pulse)
- Link-Belt 3L 0670: Potentiometer (Pulse)
- Link-Belt 3L 0757: Length Sensor Cable, 236 ft
- Link-Belt 3N 1412: DRI Solenoid Assembly
- Link-Belt 3R 1728: Slew Potentiometer
- Link-Belt F8M0022: Boom Angle Indicator
- Link-Belt S2L0027: ATB Switch (Pulse)
Switches, lamps and electrical parts
- Link-Belt 3L 0730: Connector M23/12 (Pulse)
- Link-Belt C5A1558: Switch
- Link-Belt D3R0116: Switch
- Link-Belt J7R0132: Rocker Switch, 3-Position DPDT
Filters
- Link-Belt J7H0315: Primary Engine Air Filter
- Link-Belt J7J0232: Hydraulic Oil Filter Element
- Link-Belt J7J0247: Charge Filter Element
- Link-Belt J7J0893: Pressure Filter Element
- Link-Belt J7J0913: Case Drain Filter Element
- Link-Belt N3N0219: Cab A/C Air Filter
- Link-Belt R8H0083: Secondary (Safety) Engine Air Filter
- Link-Belt S1H0121: Engine Oil Filter
- Link-Belt S1H0124: Breather Filter
- Link-Belt S2A1278: DEF Dosing Module Filter
- Link-Belt S3H0076: Secondary Fuel Filter
- Link-Belt S5H0183: Primary Fuel Filter
Hydraulic valves, couplings and cylinders
- Link-Belt F7J0192: Check Valve
- Link-Belt J7J0042: Counterbalance Cartridge
- Link-Belt J7J0783: Counterbalance Valve Cartridge
Cab, wiper and A/C parts
- Link-Belt 3N 1295: Gas Shock
- Link-Belt D3N0028: Wiper Blade
- Link-Belt J8N0250: Wiper Blade
- Link-Belt J9N0005: Circular (Bubble) Level
- Link-Belt N3N0201: Wiper Arm
- Link-Belt S2N0292: Wiper Arm
Which other Link-Belt RTC-80130 Series II parts can PE Energy quote?
We also quote Link-Belt part numbers for hydraulic pumps, motors and valves, cylinders and seal kits, boom wear pads and sheaves, winch and brake parts, transmission, axle and steering parts, filters, radiators and rated capacity limiter (RCL) electronics. Use the part number from your crane’s parts manual; if you only have an older number, send it anyway and we check the current replacement number.
See the Link-Belt crane part numbers we list. Any other current Link-Belt part number can be quoted on request.
How do I request a quote for Link-Belt RTC-80130 Series II parts?
Send the Link-Belt part number, the quantity, your RTC-80130 Series II serial number and the delivery country. We confirm price, availability and lead time with the quote.
PE Energy is an independent supplier. We are not an authorized Link-Belt dealer or distributor and are not affiliated with or endorsed by Link-Belt Cranes. Link-Belt® is a trademark of its owner; the name, model names and part numbers are used only to identify the parts we can source and quote.