Parts for the Link-Belt RTC-8065 Series II rough-terrain crane, quote-only by part number. Send the crane serial number with your request and we confirm each part against it before quoting.
What is the Link-Belt RTC-8065 Series II?
Link-Belt’s Technical Data sheet describes the RTC-8065 Series II as a rough-terrain crane with a maximum lifting capacity of 65 US tons (60 metric tons), a four-section full power boom of 38 to 115 ft (11.6 to 35.0 m), and a Cummins QSB engine, with a three-speed powershift transmission with high and low range, for 6 forward and 6 reverse gears. It is an earlier model; Link-Belt still publishes its Technical Data sheet.
Source: Link-Belt RTC-8065 Series II Technical Data (PDF, linkbelt.com). Load charts and full specifications are in that document; we do not reproduce them.
Which parts are on Link-Belt’s parts list for the RTC-8065 Series II?
Link-Belt Cranes has a parts list for the RTC-8065 Series II on its website. These 33 part numbers from that list each have a quote page with us:
Rated capacity limiter (RCL), anti-two-block and sensor parts
- Link-Belt 3J 14510: DRI Solenoid
- Link-Belt 3J 18129: Speed Sensor
- Link-Belt 3L 0667: Angle Sensor (Pulse)
- Link-Belt 3L 0670: Potentiometer (Pulse)
- Link-Belt 3L 0810: Length Sensor Cable, 109 ft (Pulse)
- Link-Belt 3R 1728: Slew Potentiometer
- Link-Belt D3R0049: Limit Switch
- Link-Belt F8M0022: Boom Angle Indicator
- Link-Belt L8R0084: Potentiometer
- Link-Belt S2L0027: ATB Switch (Pulse)
Switches, lamps and electrical parts
- Link-Belt 3L 0730: Connector M23/12 (Pulse)
- Link-Belt C5A1558: Switch
- Link-Belt D3R0116: Switch
- Link-Belt J9R0178: Driving Lamp
- Link-Belt P9R0086: Push-Button Switch, LH
Filters
- Link-Belt D7J0149: Low-Pressure Filter Element
- Link-Belt J9A0231: Transmission Filter Element
- Link-Belt N3N0219: Cab A/C Air Filter
- Link-Belt S2A1278: DEF Dosing Module Filter
- Link-Belt S2H0172: Engine Oil Filter
- Link-Belt S2H0175: Primary Engine Air Filter
- Link-Belt S2H0176: Engine Air Filter
- Link-Belt S2H0177: Crankcase Breather Filter
- Link-Belt S3H0076: Secondary Fuel Filter
- Link-Belt S5H0183: Primary Fuel Filter
Hydraulic valves, couplings and cylinders
- Link-Belt 3J 11692: Valve Cartridge
- Link-Belt J7J0783: Counterbalance Valve Cartridge
Cab, wiper and A/C parts
- Link-Belt D3N0028: Wiper Blade
- Link-Belt J8N0250: Wiper Blade
- Link-Belt J9N0005: Circular (Bubble) Level
- Link-Belt N3N0201: Wiper Arm
- Link-Belt S2N0292: Wiper Arm
- Link-Belt S3N0104: Top Hatch Window Gas Shock
Which Link-Belt RTC-8065 Series II parts can PE Energy quote?
We quote Link-Belt part numbers for hydraulic pumps, motors and valves, cylinders and seal kits, boom wear pads and sheaves, winch and brake parts, transmission, axle and steering parts, filters, radiators and rated capacity limiter (RCL) electronics. Use the part number from your crane’s parts manual; if you only have an older number, send it anyway and we check the current replacement number.
See the Link-Belt crane part numbers we list. Any other current Link-Belt part number can be quoted on request.
How do I request a quote for Link-Belt RTC-8065 Series II parts?
Send the Link-Belt part number, the quantity, your RTC-8065 Series II serial number and the delivery country. We confirm price, availability and lead time with the quote.
PE Energy is an independent supplier. We are not an authorized Link-Belt dealer or distributor and are not affiliated with or endorsed by Link-Belt Cranes. Link-Belt® is a trademark of its owner; the name, model names and part numbers are used only to identify the parts we can source and quote.